Re: [PATCH 02/13] cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs

[Ilia Lin]

Reviewed-by: Ilia Lin <ilia.lin@xxxxxxxxxx>


On Fri, Jul 5, 2019 at 12:57 PM Niklas Cassel <niklas.cassel@xxxxxxxxxx> wrote:
>
> From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
>
> The kryo cpufreq driver reads the nvmem cell and uses that data to
> populate the opps. There are other qcom cpufreq socs like krait which
> does similar thing. Except for the interpretation of the read data,
> rest of the driver is same for both the cases. So pull the common things
> out for reuse.
>
> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> [niklas.cassel@xxxxxxxxxx: split dt-binding into a separate patch and
> do not rename the compatible string. Update MAINTAINERS file.]
> Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
> ---
> Changes since RFC:
> -Made DT bindings a separate patch.
> -Keep the original compatible string, since renaming it breaks DT
> backwards compatibility.
>
>  MAINTAINERS                                   |   4 +-
>  drivers/cpufreq/Kconfig.arm                   |   4 +-
>  drivers/cpufreq/Makefile                      |   2 +-
>  ...om-cpufreq-kryo.c => qcom-cpufreq-nvmem.c} | 122 +++++++++++-------
>  4 files changed, 78 insertions(+), 54 deletions(-)
>  rename drivers/cpufreq/{qcom-cpufreq-kryo.c => qcom-cpufreq-nvmem.c} (70%)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 04a66ba93c26..38ab8374fa7a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13242,8 +13242,8 @@ QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
>  M:     Ilia Lin <ilia.lin@xxxxxxxxxx>
>  L:     linux-pm@xxxxxxxxxxxxxxx
>  S:     Maintained
> -F:     Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
> -F:     drivers/cpufreq/qcom-cpufreq-kryo.c
> +F:     Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
> +F:     drivers/cpufreq/qcom-cpufreq-nvmem.c
>
>  QUALCOMM EMAC GIGABIT ETHERNET DRIVER
>  M:     Timur Tabi <timur@xxxxxxxxxx>
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 56c31a78c692..b1aa485a28dd 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -120,8 +120,8 @@ config ARM_OMAP2PLUS_CPUFREQ
>         depends on ARCH_OMAP2PLUS
>         default ARCH_OMAP2PLUS
>
> -config ARM_QCOM_CPUFREQ_KRYO
> -       tristate "Qualcomm Kryo based CPUFreq"
> +config ARM_QCOM_CPUFREQ_NVMEM
> +       tristate "Qualcomm nvmem based CPUFreq"
>         depends on ARM64
>         depends on QCOM_QFPROM
>         depends on QCOM_SMEM
> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> index 5a6c70d26c98..8572a918aa75 100644
> --- a/drivers/cpufreq/Makefile
> +++ b/drivers/cpufreq/Makefile
> @@ -64,7 +64,7 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)   += omap-cpufreq.o
>  obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)       += pxa2xx-cpufreq.o
>  obj-$(CONFIG_PXA3xx)                   += pxa3xx-cpufreq.o
>  obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW)      += qcom-cpufreq-hw.o
> -obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO)    += qcom-cpufreq-kryo.o
> +obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM)   += qcom-cpufreq-nvmem.o
>  obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ)  += raspberrypi-cpufreq.o
>  obj-$(CONFIG_ARM_S3C2410_CPUFREQ)      += s3c2410-cpufreq.o
>  obj-$(CONFIG_ARM_S3C2412_CPUFREQ)      += s3c2412-cpufreq.o
> diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> similarity index 70%
> rename from drivers/cpufreq/qcom-cpufreq-kryo.c
> rename to drivers/cpufreq/qcom-cpufreq-nvmem.c
> index dd64dcf89c74..fad6509eecb5 100644
> --- a/drivers/cpufreq/qcom-cpufreq-kryo.c
> +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> @@ -9,7 +9,7 @@
>   * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
>   * defines the voltage and frequency value based on the msm-id in SMEM
>   * and speedbin blown in the efuse combination.
> - * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
> + * The qcom-cpufreq driver reads the msm-id and efuse value from the SoC
>   * to provide the OPP framework with required information.
>   * This is used to determine the voltage and frequency value for each OPP of
>   * operating-points-v2 table when it is parsed by the OPP framework.
> @@ -22,6 +22,7 @@
>  #include <linux/module.h>
>  #include <linux/nvmem-consumer.h>
>  #include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_opp.h>
>  #include <linux/slab.h>
> @@ -42,9 +43,9 @@ enum _msm8996_version {
>         NUM_OF_MSM8996_VERSIONS,
>  };
>
> -static struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev;
> +static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
>
> -static enum _msm8996_version qcom_cpufreq_kryo_get_msm_id(void)
> +static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
>  {
>         size_t len;
>         u32 *msm_id;
> @@ -73,28 +74,62 @@ static enum _msm8996_version qcom_cpufreq_kryo_get_msm_id(void)
>         return version;
>  }
>
> -static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
> +static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
> +                                         struct nvmem_cell *speedbin_nvmem,
> +                                         u32 *versions)
>  {
> -       struct opp_table **opp_tables;
> +       size_t len;
> +       u8 *speedbin;
>         enum _msm8996_version msm8996_version;
> +
> +       msm8996_version = qcom_cpufreq_get_msm_id();
> +       if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
> +               dev_err(cpu_dev, "Not Snapdragon 820/821!");
> +               return -ENODEV;
> +       }
> +
> +       speedbin = nvmem_cell_read(speedbin_nvmem, &len);
> +       if (IS_ERR(speedbin))
> +               return PTR_ERR(speedbin);
> +
> +       switch (msm8996_version) {
> +       case MSM8996_V3:
> +               *versions = 1 << (unsigned int)(*speedbin);
> +               break;
> +       case MSM8996_SG:
> +               *versions = 1 << ((unsigned int)(*speedbin) + 4);
> +               break;
> +       default:
> +               BUG();
> +               break;
> +       }
> +
> +       kfree(speedbin);
> +       return 0;
> +}
> +
> +static int qcom_cpufreq_probe(struct platform_device *pdev)
> +{
> +       struct opp_table **opp_tables;
> +       int (*get_version)(struct device *cpu_dev,
> +                          struct nvmem_cell *speedbin_nvmem,
> +                          u32 *versions);
>         struct nvmem_cell *speedbin_nvmem;
>         struct device_node *np;
>         struct device *cpu_dev;
>         unsigned cpu;
> -       u8 *speedbin;
>         u32 versions;
> -       size_t len;
> +       const struct of_device_id *match;
>         int ret;
>
>         cpu_dev = get_cpu_device(0);
>         if (!cpu_dev)
>                 return -ENODEV;
>
> -       msm8996_version = qcom_cpufreq_kryo_get_msm_id();
> -       if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
> -               dev_err(cpu_dev, "Not Snapdragon 820/821!");
> +       match = pdev->dev.platform_data;
> +       get_version = match->data;
> +       if (!get_version)
>                 return -ENODEV;
> -       }
>
>         np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
>         if (!np)
> @@ -115,23 +150,10 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
>                 return PTR_ERR(speedbin_nvmem);
>         }
>
> -       speedbin = nvmem_cell_read(speedbin_nvmem, &len);
> +       ret = get_version(cpu_dev, speedbin_nvmem, &versions);
>         nvmem_cell_put(speedbin_nvmem);
> -       if (IS_ERR(speedbin))
> -               return PTR_ERR(speedbin);
> -
> -       switch (msm8996_version) {
> -       case MSM8996_V3:
> -               versions = 1 << (unsigned int)(*speedbin);
> -               break;
> -       case MSM8996_SG:
> -               versions = 1 << ((unsigned int)(*speedbin) + 4);
> -               break;
> -       default:
> -               BUG();
> -               break;
> -       }
> -       kfree(speedbin);
> +       if (ret)
> +               return ret;
>
>         opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables), GFP_KERNEL);
>         if (!opp_tables)
> @@ -174,7 +196,7 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
>         return ret;
>  }
>
> -static int qcom_cpufreq_kryo_remove(struct platform_device *pdev)
> +static int qcom_cpufreq_remove(struct platform_device *pdev)
>  {
>         struct opp_table **opp_tables = platform_get_drvdata(pdev);
>         unsigned int cpu;
> @@ -189,18 +211,20 @@ static int qcom_cpufreq_kryo_remove(struct platform_device *pdev)
>         return 0;
>  }
>
> -static struct platform_driver qcom_cpufreq_kryo_driver = {
> -       .probe = qcom_cpufreq_kryo_probe,
> -       .remove = qcom_cpufreq_kryo_remove,
> +static struct platform_driver qcom_cpufreq_driver = {
> +       .probe = qcom_cpufreq_probe,
> +       .remove = qcom_cpufreq_remove,
>         .driver = {
> -               .name = "qcom-cpufreq-kryo",
> +               .name = "qcom-cpufreq",
>         },
>  };
>
> -static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = {
> -       { .compatible = "qcom,apq8096", },
> -       { .compatible = "qcom,msm8996", },
> -       {}
> +static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
> +       { .compatible = "qcom,apq8096",
> +         .data = qcom_cpufreq_kryo_name_version },
> +       { .compatible = "qcom,msm8996",
> +         .data = qcom_cpufreq_kryo_name_version },
> +       {},
>  };
>
>  /*
> @@ -209,7 +233,7 @@ static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = {
>   * which may be defered as well. The init here is only registering
>   * the driver and the platform device.
>   */
> -static int __init qcom_cpufreq_kryo_init(void)
> +static int __init qcom_cpufreq_init(void)
>  {
>         struct device_node *np = of_find_node_by_path("/");
>         const struct of_device_id *match;
> @@ -218,32 +242,32 @@ static int __init qcom_cpufreq_kryo_init(void)
>         if (!np)
>                 return -ENODEV;
>
> -       match = of_match_node(qcom_cpufreq_kryo_match_list, np);
> +       match = of_match_node(qcom_cpufreq_match_list, np);
>         of_node_put(np);
>         if (!match)
>                 return -ENODEV;
>
> -       ret = platform_driver_register(&qcom_cpufreq_kryo_driver);
> +       ret = platform_driver_register(&qcom_cpufreq_driver);
>         if (unlikely(ret < 0))
>                 return ret;
>
> -       kryo_cpufreq_pdev = platform_device_register_simple(
> -               "qcom-cpufreq-kryo", -1, NULL, 0);
> -       ret = PTR_ERR_OR_ZERO(kryo_cpufreq_pdev);
> +       cpufreq_pdev = platform_device_register_data(NULL, "qcom-cpufreq",
> +                                                    -1, match, sizeof(*match));
> +       ret = PTR_ERR_OR_ZERO(cpufreq_pdev);
>         if (0 == ret)
>                 return 0;
>
> -       platform_driver_unregister(&qcom_cpufreq_kryo_driver);
> +       platform_driver_unregister(&qcom_cpufreq_driver);
>         return ret;
>  }
> -module_init(qcom_cpufreq_kryo_init);
> +module_init(qcom_cpufreq_init);
>
> -static void __exit qcom_cpufreq_kryo_exit(void)
> +static void __exit qcom_cpufreq_exit(void)
>  {
> -       platform_device_unregister(kryo_cpufreq_pdev);
> -       platform_driver_unregister(&qcom_cpufreq_kryo_driver);
> +       platform_device_unregister(cpufreq_pdev);
> +       platform_driver_unregister(&qcom_cpufreq_driver);
>  }
> -module_exit(qcom_cpufreq_kryo_exit);
> +module_exit(qcom_cpufreq_exit);
>
> -MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver");
> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. CPUfreq driver");
>  MODULE_LICENSE("GPL v2");
> --
> 2.21.0
>