[PATCH 02/14] iio: adc: sc27xx: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()

[Fuqian Huang]

devm_add_action_or_reset() is introduced as a helper function which 
internally calls devm_add_action(). If devm_add_action() fails 
then it will execute the action mentioned and return the error code.
This reduce source code size (avoid writing the action twice) 
and reduce the likelyhood of bugs.

Signed-off-by: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
---
 drivers/iio/adc/sc27xx_adc.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
index ec86f640e963..d7ca002cbb17 100644
--- a/drivers/iio/adc/sc27xx_adc.c
+++ b/drivers/iio/adc/sc27xx_adc.c
@@ -546,10 +546,9 @@ static int sc27xx_adc_probe(struct platform_device *pdev)
 		return -ENXIO;
 	}
 
-	ret = devm_add_action(dev, sc27xx_adc_free_hwlock,
+	ret = devm_add_action_or_reset(dev, sc27xx_adc_free_hwlock,
 			      sc27xx_data->hwlock);
 	if (ret) {
-		sc27xx_adc_free_hwlock(sc27xx_data->hwlock);
 		dev_err(dev, "failed to add hwspinlock action\n");
 		return ret;
 	}
@@ -563,9 +562,8 @@ static int sc27xx_adc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = devm_add_action(dev, sc27xx_adc_disable, sc27xx_data);
+	ret = devm_add_action_or_reset(dev, sc27xx_adc_disable, sc27xx_data);
 	if (ret) {
-		sc27xx_adc_disable(sc27xx_data);
 		dev_err(dev, "failed to add ADC disable action\n");
 		return ret;
 	}
-- 
2.11.0