Re: [PATCH net-next v6 04/15] ethtool: introduce ethtool netlink interface

[Jiri Pirko]

Mon, Jul 08, 2019 at 07:27:29PM CEST, mkubecek@xxxxxxx wrote:
>On Wed, Jul 03, 2019 at 10:41:51AM +0200, Jiri Pirko wrote:
>> Tue, Jul 02, 2019 at 04:52:41PM CEST, mkubecek@xxxxxxx wrote:
>> >On Tue, Jul 02, 2019 at 02:25:21PM +0200, Jiri Pirko wrote:
>> >> Tue, Jul 02, 2019 at 01:49:59PM CEST, mkubecek@xxxxxxx wrote:
>> >> >+
>> >> >+    ETHTOOL_A_HEADER_DEV_INDEX	(u32)		device ifindex
>> >> >+    ETHTOOL_A_HEADER_DEV_NAME	(string)	device name
>> >> >+    ETHTOOL_A_HEADER_INFOMASK	(u32)		info mask
>> >> >+    ETHTOOL_A_HEADER_GFLAGS	(u32)		flags common for all requests
>> >> >+    ETHTOOL_A_HEADER_RFLAGS	(u32)		request specific flags
>> >> >+
>> >> >+ETHTOOL_A_HEADER_DEV_INDEX and ETHTOOL_A_HEADER_DEV_NAME identify the device
>> >> >+message relates to. One of them is sufficient in requests, if both are used,
>> >> >+they must identify the same device. Some requests, e.g. global string sets, do
>> >> >+not require device identification. Most GET requests also allow dump requests
>> >> >+without device identification to query the same information for all devices
>> >> >+providing it (each device in a separate message).
>> >> >+
>> >> >+Optional info mask allows to ask only for a part of data provided by GET
>> >> 
>> >> How this "infomask" works? What are the bits related to? Is that request
>> >> specific?
>> >
>> >The interpretation is request specific, the information returned for
>> >a GET request is divided into multiple parts and client can choose to
>> >request one of them (usually one). In the code so far, infomask bits
>> >correspond to top level (nest) attributes but I would rather not make it
>> >a strict rule.
>> 
>> Wait, so it is a matter of verbosity? If you have multiple parts and the
>> user is able to chose one of them, why don't you rather have multiple
>> get commands, one per bit. This infomask construct seems redundant to me.
>
>I thought it was a matter of verbosity because it is a very basic
>element of the design, it was even advertised in the cover letter among
>the basic ideas, it has been there since the very beginning and in five
>previous versions through year and a half, noone did question it. That's
>why I thought you objected against unclear description, not against the
>concept as such.
>
>There are two reasons for this design. First is to reduce the number of
>requests needed to get the information. This is not so much a problem of
>ethtool itself; the only existing commands that would result in multiple
>request messages would be "ethtool <dev>" and "ethtool -s <dev>". Maybe
>also "ethtool -x/-X <dev>" but even if the indirection table and hash
>key have different bits assigned now, they don't have to be split even
>if we split other commands. It may be bigger problem for daemons wanting
>to keep track of system configuration which would have to issue many
>requests whenever a new device appears.
>
>Second reason is that with 8-bit genetlink command/message id, the space
>is not as infinite as it might seem. I counted quickly, right now the
>full series uses 14 ids for kernel messages, with split you propose it
>would most likely grow to 44. For full implementation of all ethtool
>functionality, we could get to ~60 ids. It's still only 1/4 of the
>available space but it's not clear what the future development will look
>like. We would certainly need to be careful not to start allocating new
>commands for single parameters and try to be foreseeing about what can
>be grouped together. But we will need to do that in any case.
>
>On kernel side, splitting existing messages would make some things a bit
>easier. It would also reduce the number of scenarios where only part of
>requested information is available or only part of a SET request fails.

Okay, I got your point. So why don't we look at if from the other angle.
Why don't we have only single get/set command that would be in general
used to get/set ALL info from/to the kernel. Where we can have these
bits (perhaps rather varlen bitfield) to for user to indicate which data
is he interested in? This scales. The other commands would be
just for action.

Something like RTM_GETLINK/RTM_SETLINK. Makes sense?


>
>Michal