Re: [PATCH 03/14] power: supply: sc27xx: Introduce local variable 'struct device *dev'

[Baolin Wang]

On Mon, 8 Jul 2019 at 20:33, Fuqian Huang <huangfq.daxian@xxxxxxxxx> wrote:
>
> Introduce local variable 'struct device *dev' and use it instead of
> dereferencing it repeatly.
>
> Signed-off-by: Fuqian Huang <huangfq.daxian@xxxxxxxxx>

Looks good to me. Thanks.
Reviewed-by: Baolin Wang <baolin.wang@xxxxxxxxxx>

> ---
>  drivers/power/supply/sc27xx_fuel_gauge.c | 47 ++++++++++++++++----------------
>  1 file changed, 24 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
> index 24895cc3b41e..9c184d80088b 100644
> --- a/drivers/power/supply/sc27xx_fuel_gauge.c
> +++ b/drivers/power/supply/sc27xx_fuel_gauge.c
> @@ -957,81 +957,82 @@ static int sc27xx_fgu_hw_init(struct sc27xx_fgu_data *data)
>
>  static int sc27xx_fgu_probe(struct platform_device *pdev)
>  {
> -       struct device_node *np = pdev->dev.of_node;
> +       struct device *dev = &pdev->dev;
> +       struct device_node *np = dev->of_node;
>         struct power_supply_config fgu_cfg = { };
>         struct sc27xx_fgu_data *data;
>         int ret, irq;
>
> -       data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> +       data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>         if (!data)
>                 return -ENOMEM;
>
> -       data->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> +       data->regmap = dev_get_regmap(dev->parent, NULL);
>         if (!data->regmap) {
> -               dev_err(&pdev->dev, "failed to get regmap\n");
> +               dev_err(dev, "failed to get regmap\n");
>                 return -ENODEV;
>         }
>
> -       ret = device_property_read_u32(&pdev->dev, "reg", &data->base);
> +       ret = device_property_read_u32(dev, "reg", &data->base);
>         if (ret) {
> -               dev_err(&pdev->dev, "failed to get fgu address\n");
> +               dev_err(dev, "failed to get fgu address\n");
>                 return ret;
>         }
>
> -       data->channel = devm_iio_channel_get(&pdev->dev, "bat-temp");
> +       data->channel = devm_iio_channel_get(dev, "bat-temp");
>         if (IS_ERR(data->channel)) {
> -               dev_err(&pdev->dev, "failed to get IIO channel\n");
> +               dev_err(dev, "failed to get IIO channel\n");
>                 return PTR_ERR(data->channel);
>         }
>
> -       data->charge_chan = devm_iio_channel_get(&pdev->dev, "charge-vol");
> +       data->charge_chan = devm_iio_channel_get(dev, "charge-vol");
>         if (IS_ERR(data->charge_chan)) {
> -               dev_err(&pdev->dev, "failed to get charge IIO channel\n");
> +               dev_err(dev, "failed to get charge IIO channel\n");
>                 return PTR_ERR(data->charge_chan);
>         }
>
> -       data->gpiod = devm_gpiod_get(&pdev->dev, "bat-detect", GPIOD_IN);
> +       data->gpiod = devm_gpiod_get(dev, "bat-detect", GPIOD_IN);
>         if (IS_ERR(data->gpiod)) {
> -               dev_err(&pdev->dev, "failed to get battery detection GPIO\n");
> +               dev_err(dev, "failed to get battery detection GPIO\n");
>                 return PTR_ERR(data->gpiod);
>         }
>
>         ret = gpiod_get_value_cansleep(data->gpiod);
>         if (ret < 0) {
> -               dev_err(&pdev->dev, "failed to get gpio state\n");
> +               dev_err(dev, "failed to get gpio state\n");
>                 return ret;
>         }
>
>         data->bat_present = !!ret;
>         mutex_init(&data->lock);
> -       data->dev = &pdev->dev;
> +       data->dev = dev;
>         platform_set_drvdata(pdev, data);
>
>         fgu_cfg.drv_data = data;
>         fgu_cfg.of_node = np;
> -       data->battery = devm_power_supply_register(&pdev->dev, &sc27xx_fgu_desc,
> +       data->battery = devm_power_supply_register(dev, &sc27xx_fgu_desc,
>                                                    &fgu_cfg);
>         if (IS_ERR(data->battery)) {
> -               dev_err(&pdev->dev, "failed to register power supply\n");
> +               dev_err(dev, "failed to register power supply\n");
>                 return PTR_ERR(data->battery);
>         }
>
>         ret = sc27xx_fgu_hw_init(data);
>         if (ret) {
> -               dev_err(&pdev->dev, "failed to initialize fgu hardware\n");
> +               dev_err(dev, "failed to initialize fgu hardware\n");
>                 return ret;
>         }
>
> -       ret = devm_add_action(&pdev->dev, sc27xx_fgu_disable, data);
> +       ret = devm_add_action(dev, sc27xx_fgu_disable, data);
>         if (ret) {
>                 sc27xx_fgu_disable(data);
> -               dev_err(&pdev->dev, "failed to add fgu disable action\n");
> +               dev_err(dev, "failed to add fgu disable action\n");
>                 return ret;
>         }
>
>         irq = platform_get_irq(pdev, 0);
>         if (irq < 0) {
> -               dev_err(&pdev->dev, "no irq resource specified\n");
> +               dev_err(dev, "no irq resource specified\n");
>                 return irq;
>         }
>
> @@ -1046,17 +1047,17 @@ static int sc27xx_fgu_probe(struct platform_device *pdev)
>
>         irq = gpiod_to_irq(data->gpiod);
>         if (irq < 0) {
> -               dev_err(&pdev->dev, "failed to translate GPIO to IRQ\n");
> +               dev_err(dev, "failed to translate GPIO to IRQ\n");
>                 return irq;
>         }
>
> -       ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
> +       ret = devm_request_threaded_irq(dev, irq, NULL,
>                                         sc27xx_fgu_bat_detection,
>                                         IRQF_ONESHOT | IRQF_TRIGGER_RISING |
>                                         IRQF_TRIGGER_FALLING,
>                                         pdev->name, data);
>         if (ret) {
> -               dev_err(&pdev->dev, "failed to request IRQ\n");
> +               dev_err(dev, "failed to request IRQ\n");
>                 return ret;
>         }
>
> --
> 2.11.0
>


-- 
Baolin Wang
Best Regards