[PATCH 10/10] ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX 6ULL

From: Stefan Riedmueller
Date: Tue Jul 09 2019 - 03:34:59 EST

Next message: Stefan Riedmueller: "[PATCH 08/10] ARM: dts: imx6ul: segin: Move ECSPI interface to board include file"
Previous message: Stefan Riedmueller: "[PATCH 04/10] ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01"
In reply to: Stefan Riedmueller: "[PATCH 04/10] ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01"
Next in thread: Stefan Riedmueller: "[PATCH 08/10] ARM: dts: imx6ul: segin: Move ECSPI interface to board include file"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

In addition to the PHYTEC phyCORE-i.MX 6UL the PHYTEC phyBOARD-Segin is
also available with the PHYTEC phyCORE-i.MX 6ULL. So this adds support
for this SOM and its baseboards.

It comes in a full featured option with either NAND flash or eMMC and in
a low cost option only available with NAND flash.

The hardware specs are:

- Full featured with NAND or eMMC:
* i.MX 6ULL Y2
* 512MB DDR3 memory
* 512MB NAND flash or 4GB/8GB eMMC
* Dual 10/100 Ethernet
* USB Host and USB OTG
* RS232
* MicroSD external storage
* Audio, RS232, I2C, SPI, CAN headers
* Further I/O options via A/V and Expansion headers

- Low cost with NAND:
* i.MX 6ULL Y0
* 256MB DDR3 memory
* 128MB NAND flash
* Single 10/100 Ethernet
* USB OTG
* RS232
* MicroSD external storage
* I2C
* Further I/O options via Expansion headers

Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi | 24 ++++++
.../boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts | 93 ++++++++++++++++++++++
.../boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts | 93 ++++++++++++++++++++++
.../boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts | 45 +++++++++++
.../boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi | 19 +++++
arch/arm/boot/dts/imx6ull-phytec-segin.dtsi | 38 +++++++++
7 files changed, 315 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 668b57c8cc57..16efd11cf20f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -580,6 +580,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ull-14x14-evk.dtb \
imx6ull-colibri-eval-v3.dtb \
imx6ull-colibri-wifi-eval-v3.dtb \
+ imx6ull-phytec-segin-ff-rdk-nand.dtb \
+ imx6ull-phytec-segin-ff-rdk-emmc.dtb \
+ imx6ull-phytec-segin-lc-rdk-nand.dtb \
imx6ulz-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
diff --git a/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
new file mode 100644
index 000000000000..56cd16e5a77f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
+ */
+
+#include "imx6ul-phytec-phycore-som.dtsi"
+
+/ {
+ model = "PHYTEC phyCORE-i.MX6 ULL";
+ compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&iomuxc {
+ /delete-node/ gpioledssomgrp;
+};
+
+&iomuxc_snvs {
+ pinctrl_gpioleds_som: gpioledssomgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
new file mode 100644
index 000000000000..9648d4ecaf58
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
+ compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10",
+ "phytec,imx6ull-pcl063","fsl,imx6ull";
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&tlv320 {
+ status = "okay";
+};
+
+&ecspi3 {
+ status = "okay";
+};
+
+&ethphy1 {
+ status = "okay";
+};
+
+&ethphy2 {
+ status = "okay";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&fec2 {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
+
+&reg_can1_en {
+ status = "okay";
+};
+
+&reg_sound_1v8 {
+ status = "okay";
+};
+
+&reg_sound_3v3 {
+ status = "okay";
+};
+
+&sai2 {
+ status = "okay";
+};
+
+&sound {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usbotg1 {
+ status = "okay";
+};
+
+&usbotg2 {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
+
+&usdhc2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
new file mode 100644
index 000000000000..656baf846453
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND";
+ compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10",
+ "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&tlv320 {
+ status = "okay";
+};
+
+&ecspi3 {
+ status = "okay";
+};
+
+&ethphy1 {
+ status = "okay";
+};
+
+&ethphy2 {
+ status = "okay";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&fec2 {
+ status = "okay";
+};
+
+&gpmi {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
+
+&reg_can1_en {
+ status = "okay";
+};
+
+&reg_sound_1v8 {
+ status = "okay";
+};
+
+&reg_sound_3v3 {
+ status = "okay";
+};
+
+&sai2 {
+ status = "okay";
+};
+
+&sound {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usbotg1 {
+ status = "okay";
+};
+
+&usbotg2 {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
new file mode 100644
index 000000000000..e168494e0a6d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Segin i.MX6 ULL Low Cost with NAND";
+ compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10",
+ "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&ethphy1 {
+ status = "okay";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&gpmi {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
+
+&usbotg1 {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
new file mode 100644
index 000000000000..ff08d95a1aa2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
+ */
+
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+
+&iomuxc {
+ /delete-node/ gpio_keysgrp;
+};
+
+&iomuxc_snvs {
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x79
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
new file mode 100644
index 000000000000..c1595fc785f7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
+ */
+
+#include "imx6ul-phytec-segin.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Segin i.MX6 ULL";
+ compatible = "phytec,imx6ull-pbacd-10", "phytec,imx6ull-pcl063","fsl,imx6ull";
+};
+
+&iomuxc {
+ /delete-node/ flexcan1engrp;
+ /delete-node/ rtcintgrp;
+ /delete-node/ stmpegrp;
+};
+
+&iomuxc_snvs {
+ princtrl_flexcan1_en: flexcan1engrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059
+ >;
+ };
+
+ pinctrl_rtc_int: rtcintgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
+ >;
+ };
+
+ pinctrl_stmpe: stmpegrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
+ >;
+ };
+};
--
2.7.4

Next message: Stefan Riedmueller: "[PATCH 08/10] ARM: dts: imx6ul: segin: Move ECSPI interface to board include file"
Previous message: Stefan Riedmueller: "[PATCH 04/10] ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01"
In reply to: Stefan Riedmueller: "[PATCH 04/10] ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01"
Next in thread: Stefan Riedmueller: "[PATCH 08/10] ARM: dts: imx6ul: segin: Move ECSPI interface to board include file"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]