[PATCH v3 0/4] Add a generic driver for LED-based backlight

[Jean-Jacques Hiblot]

This series aims to add a led-backlight driver, similar to pwm-backlight,
but using a LED class device underneath.

A few years ago (2015), Tomi Valkeinen posted a series implementing a
backlight driver on top of a LED device:
https://patchwork.kernel.org/patch/7293991/
https://patchwork.kernel.org/patch/7294001/
https://patchwork.kernel.org/patch/7293981/

The discussion stopped because Tomi lacked the time to work on it.

changes in v3:
- dt binding: don't limit the brightness range to 0-255. Use the range of
  the underlying LEDs. as a side-effect, all LEDs must now have the same
  range
- driver: Adapt to dt binding update.
- driver: rework probe() for clarity and remove the remaining goto.

changes in v2:
- handle more than one LED.
- don't make the backlight device a child of the LED controller.
- make brightness-levels and default-brightness-level optionnal
- removed the option to use a GPIO enable.
- removed the option to use a regulator. It should be handled by the LED core
- don't make any change to the LED core (not needed anymore)

Jean-Jacques Hiblot (2):
  leds: Add managed API to get a LED from a device driver
  dt-bindings: backlight: Add led-backlight binding

Tomi Valkeinen (2):
  leds: Add of_led_get() and led_put()
  backlight: add led-backlight driver

 .../bindings/leds/backlight/led-backlight.txt |  28 ++
 drivers/leds/led-class.c                      |  92 ++++++
 drivers/video/backlight/Kconfig               |   7 +
 drivers/video/backlight/Makefile              |   1 +
 drivers/video/backlight/led_bl.c              | 268 ++++++++++++++++++
 include/linux/leds.h                          |   6 +
 6 files changed, 402 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
 create mode 100644 drivers/video/backlight/led_bl.c

-- 
2.17.1