Re: [PATCH v3 3/4] dt-bindings: backlight: Add led-backlight binding

[Pavel Machek]

On Wed 2019-07-10 14:39:31, Jean-Jacques Hiblot wrote:
> Add DT binding for led-backlight.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
> ---
>  .../bindings/leds/backlight/led-backlight.txt | 28 +++++++++++++++++++
>  1 file changed, 28 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> new file mode 100644
> index 000000000000..0444eec8efe1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
> @@ -0,0 +1,28 @@
> +led-backlight bindings
> +
> +This binding is used to describe a basic backlight device made of
> LEDs.

Ok.

> +It can also be used to describe a backlight device controlled by the output of
> +a LED driver.

? The LED driver should better be driving some LEDs...

> +Required properties:
> +  - compatible: "led-backlight"
> +  - leds: a list of LEDs
> +
> +Optional properties:
> +  - brightness-levels: Array of distinct brightness levels. The levels must be
> +                       in the range accepted by the underlying LED devices.
> +                       This is used to translate a backlight brightness level
> +                       into a LED brightness level. if not provided, the
> +                       identity mapping is used.

"If it is not"
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature