[PATCH 02/12] Documentation/arm: repointer docs to Documentation/arch/arm
From: Alex Shi
Date: Thu Jul 11 2019 - 22:20:57 EST
Since we move 'arm/arm64' docs to Documentation/arch/{arm,arm64} dir,
redirect the doc pointer to them.
Signed-off-by: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
Cc: Jonathan Corbet <corbet@xxxxxxx>
Cc: Kukjin Kim <kgene@xxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Cc: linux-doc@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-samsung-soc@xxxxxxxxxxxxxxx
Cc: linux-crypto@xxxxxxxxxxxxxxx
Cc: linux-input@xxxxxxxxxxxxxxx
Cc: linux-serial@xxxxxxxxxxxxxxx
---
Documentation/arch/arm/Samsung-S3C24XX/GPIO.txt | 2 +-
.../arch/arm/Samsung-S3C24XX/Overview.txt | 6 +++---
Documentation/arch/arm/Samsung/GPIO.txt | 2 +-
Documentation/arch/arm/Samsung/Overview.txt | 4 ++--
Documentation/devicetree/bindings/arm/xen.txt | 2 +-
Documentation/devicetree/booting-without-of.txt | 4 ++--
Documentation/translations/zh_CN/arm/Booting | 4 ++--
.../translations/zh_CN/arm/kernel_user_helpers.txt | 4 ++--
MAINTAINERS | 6 +++---
arch/arm/Kconfig | 2 +-
arch/arm/common/mcpm_entry.c | 2 +-
arch/arm/common/mcpm_head.S | 2 +-
arch/arm/common/vlock.S | 2 +-
arch/arm/include/asm/setup.h | 2 +-
arch/arm/include/uapi/asm/setup.h | 2 +-
arch/arm/kernel/entry-armv.S | 2 +-
arch/arm/mach-exynos/common.h | 2 +-
arch/arm/mach-ixp4xx/Kconfig | 14 +++++++-------
arch/arm/mach-s3c24xx/pm.c | 2 +-
arch/arm/mach-sti/Kconfig | 2 +-
arch/arm/mm/Kconfig | 4 ++--
arch/arm/plat-samsung/Kconfig | 6 +++---
arch/arm/tools/mach-types | 2 +-
arch/arm64/Kconfig | 2 +-
arch/arm64/kernel/kuser32.S | 2 +-
arch/mips/bmips/setup.c | 2 +-
drivers/crypto/sunxi-ss/sun4i-ss-cipher.c | 2 +-
drivers/crypto/sunxi-ss/sun4i-ss-core.c | 2 +-
drivers/crypto/sunxi-ss/sun4i-ss-hash.c | 2 +-
drivers/crypto/sunxi-ss/sun4i-ss.h | 2 +-
drivers/input/touchscreen/sun4i-ts.c | 2 +-
drivers/tty/serial/Kconfig | 2 +-
32 files changed, 49 insertions(+), 49 deletions(-)
diff --git a/Documentation/arch/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arch/arm/Samsung-S3C24XX/GPIO.txt
index e8f918b96123..542a95cd82e7 100644
--- a/Documentation/arch/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arch/arm/Samsung-S3C24XX/GPIO.txt
@@ -12,7 +12,7 @@ Introduction
of the s3c2410 GPIO system, please read the Samsung provided
data-sheet/users manual to find out the complete list.
- See Documentation/arm/Samsung/GPIO.txt for the core implementation.
+ See Documentation/arch/arm/Samsung/GPIO.txt for the core implementation.
GPIOLIB
diff --git a/Documentation/arch/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arch/arm/Samsung-S3C24XX/Overview.txt
index 00d3c3141e21..8d84a1c6216d 100644
--- a/Documentation/arch/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arch/arm/Samsung-S3C24XX/Overview.txt
@@ -182,7 +182,7 @@ NAND
controller. If there are any problems the latest linux-mtd
code can be found from http://www.linux-mtd.infradead.org/
- For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt
+ For more information see Documentation/arch/arm/Samsung-S3C24XX/NAND.txt
SD/MMC
@@ -221,8 +221,8 @@ GPIO
As of v2.6.34, the move towards using gpiolib support is almost
complete, and very little of the old calls are left.
- See Documentation/arm/Samsung-S3C24XX/GPIO.txt for the S3C24XX specific
- support and Documentation/arm/Samsung/GPIO.txt for the core Samsung
+ See Documentation/arch/arm/Samsung-S3C24XX/GPIO.txt for the S3C24XX specific
+ support and Documentation/arch/arm/Samsung/GPIO.txt for the core Samsung
implementation.
diff --git a/Documentation/arch/arm/Samsung/GPIO.txt b/Documentation/arch/arm/Samsung/GPIO.txt
index 795adfd88081..e693603f38af 100644
--- a/Documentation/arch/arm/Samsung/GPIO.txt
+++ b/Documentation/arch/arm/Samsung/GPIO.txt
@@ -11,7 +11,7 @@ specific calls provided alongside the drivers/gpio core.
S3C24XX (Legacy)
----------------
-See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information
+See Documentation/arch/arm/Samsung-S3C24XX/GPIO.txt for more information
about these devices. Their implementation has been brought into line
with the core samsung implementation described in this document.
diff --git a/Documentation/arch/arm/Samsung/Overview.txt b/Documentation/arch/arm/Samsung/Overview.txt
index 8f7309bad460..93091054a215 100644
--- a/Documentation/arch/arm/Samsung/Overview.txt
+++ b/Documentation/arch/arm/Samsung/Overview.txt
@@ -11,7 +11,7 @@ Introduction
The currently supported SoCs are:
- - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
+ - S3C24XX: See Documentation/arch/arm/Samsung-S3C24XX/Overview.txt for full list
- S3C64XX: S3C6400 and S3C6410
- S5PC110 / S5PV210
@@ -22,7 +22,7 @@ S3C24XX Systems
There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
deals with the architecture and drivers specific to these devices.
- See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
+ See Documentation/arch/arm/Samsung-S3C24XX/Overview.txt for more information
on the implementation details and specific support.
diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt
index c9b9321434ea..2533cd4f5d79 100644
--- a/Documentation/devicetree/bindings/arm/xen.txt
+++ b/Documentation/devicetree/bindings/arm/xen.txt
@@ -54,7 +54,7 @@ hypervisor {
};
The format and meaning of the "xen,uefi-*" parameters are similar to those in
-Documentation/arm/uefi.txt, which are provided by the regular UEFI stub. However
+Documentation/arch/arm/uefi.txt, which are provided by the regular UEFI stub. However
they differ because they are provided by the Xen hypervisor, together with a set
of UEFI runtime services implemented via hypercalls, see
http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,platform.h.html.
diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
index 60f8640f2b2f..58d606fca7eb 100644
--- a/Documentation/devicetree/booting-without-of.txt
+++ b/Documentation/devicetree/booting-without-of.txt
@@ -160,7 +160,7 @@ it with special cases.
of the kernel image. That entry point supports two calling
conventions. A summary of the interface is described here. A full
description of the boot requirements is documented in
- Documentation/arm/Booting
+ Documentation/arch/arm/Booting
a) ATAGS interface. Minimal information is passed from firmware
to the kernel with a tagged list of predefined parameters.
@@ -174,7 +174,7 @@ it with special cases.
b) Entry with a flattened device-tree block. Firmware loads the
physical address of the flattened device tree block (dtb) into r2,
r1 is not used, but it is considered good practice to use a valid
- machine number as described in Documentation/arm/Booting.
+ machine number as described in Documentation/arch/arm/Booting.
r0 : 0
diff --git a/Documentation/translations/zh_CN/arm/Booting b/Documentation/translations/zh_CN/arm/Booting
index 1fe866f8218f..8bcad25099b3 100644
--- a/Documentation/translations/zh_CN/arm/Booting
+++ b/Documentation/translations/zh_CN/arm/Booting
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/arm/Booting
+Chinese translated version of Documentation/arch/arm/Booting
If you have any comment or update to the content, please contact the
original document maintainer directly. However, if you have a problem
@@ -9,7 +9,7 @@ or if there is a problem with the translation.
Maintainer: Russell King <linux@xxxxxxxxxxxxxxxx>
Chinese maintainer: Fu Wei <tekkamanninja@xxxxxxxxx>
---------------------------------------------------------------------
-Documentation/arm/Booting çäæçè
+Documentation/arch/arm/Booting çäæçè
åææèèæææææçååïèçæèçåææççæèãåæääçèæ
äææåéçèïäåäåäæççæèæåãåææçèææäåææèç
diff --git a/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt b/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt
index cd7fc8f34cf9..ed7083e7e43d 100644
--- a/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt
+++ b/Documentation/translations/zh_CN/arm/kernel_user_helpers.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/arm/kernel_user_helpers.txt
+Chinese translated version of Documentation/arch/arm/kernel_user_helpers.txt
If you have any comment or update to the content, please contact the
original document maintainer directly. However, if you have a problem
@@ -10,7 +10,7 @@ Maintainer: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
Dave Martin <dave.martin@xxxxxxxxxx>
Chinese maintainer: Fu Wei <tekkamanninja@xxxxxxxxx>
---------------------------------------------------------------------
-Documentation/arm/kernel_user_helpers.txt çäæçè
+Documentation/arch/arm/kernel_user_helpers.txt çäæçè
åææèèæææææçååïèçæèçåææççæèãåæääçèæ
äææåéçèïäåäåäæççæèæåãåææçèææäåææèç
diff --git a/MAINTAINERS b/MAINTAINERS
index 43ca94856944..c21d5464c86f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2192,7 +2192,7 @@ F: drivers/*/*s3c64xx*
F: drivers/*/*s5pv210*
F: drivers/memory/samsung/*
F: drivers/soc/samsung/*
-F: Documentation/arm/Samsung/
+F: Documentation/arch/arm/Samsung/
F: Documentation/devicetree/bindings/arm/samsung/
F: Documentation/devicetree/bindings/sram/samsung-sram.txt
F: Documentation/devicetree/bindings/power/pd-samsung.txt
@@ -2569,7 +2569,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
S: Maintained
F: arch/arm64/
X: arch/arm64/boot/dts/
-F: Documentation/arm64/
+F: Documentation/arch/arm64/
AS3645A LED FLASH CONTROLLER DRIVER
M: Sakari Ailus <sakari.ailus@xxxxxx>
@@ -11470,7 +11470,7 @@ L: linux-omap@xxxxxxxxxxxxxxx
L: linux-fbdev@xxxxxxxxxxxxxxx
S: Orphan
F: drivers/video/fbdev/omap2/
-F: Documentation/arm/OMAP/DSS
+F: Documentation/arch/arm/OMAP/DSS
OMAP FRAMEBUFFER SUPPORT
L: linux-fbdev@xxxxxxxxxxxxxxx
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ad00e17d6988..1b276dda837d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2146,7 +2146,7 @@ config VFP
Say Y to include VFP support code in the kernel. This is needed
if your hardware includes a VFP unit.
- Please see <file:Documentation/arm/VFP/release-notes.txt> for
+ Please see <file:Documentation/arch/arm/VFP/release-notes.txt> for
release notes and additional status information.
Say N if your target does not have VFP hardware.
diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
index e24ad60891b2..0ed7d19e0fbe 100644
--- a/arch/arm/common/mcpm_entry.c
+++ b/arch/arm/common/mcpm_entry.c
@@ -21,7 +21,7 @@
/*
* The public API for this code is documented in arch/arm/include/asm/mcpm.h.
* For a comprehensive description of the main algorithm used here, please
- * see Documentation/arm/cluster-pm-race-avoidance.txt.
+ * see Documentation/arch/arm/cluster-pm-race-avoidance.txt.
*/
struct sync_struct mcpm_sync;
diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S
index d5bd75dd576d..c7071314ad76 100644
--- a/arch/arm/common/mcpm_head.S
+++ b/arch/arm/common/mcpm_head.S
@@ -5,7 +5,7 @@
* Created by: Nicolas Pitre, March 2012
* Copyright: (C) 2012-2013 Linaro Limited
*
- * Refer to Documentation/arm/cluster-pm-race-avoidance.txt
+ * Refer to Documentation/arch/arm/cluster-pm-race-avoidance.txt
* for details of the synchronisation algorithms used here.
*/
diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S
index 9675cc15d0c4..cfb6db2053f7 100644
--- a/arch/arm/common/vlock.S
+++ b/arch/arm/common/vlock.S
@@ -6,7 +6,7 @@
* Copyright: (C) 2012-2013 Linaro Limited
*
* This algorithm is described in more detail in
- * Documentation/arm/vlocks.txt.
+ * Documentation/arch/arm/vlocks.txt.
*/
#include <linux/linkage.h>
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 77e5582c2259..483f9f29170a 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -5,7 +5,7 @@
* Copyright (C) 1997-1999 Russell King
*
* Structure passed to kernel to tell it about the
- * hardware it's running on. See Documentation/arm/Setup
+ * hardware it's running on. See Documentation/arch/arm/Setup
* for more info.
*/
#ifndef __ASMARM_SETUP_H
diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h
index 6b335a9ff8c8..3691ac2a00b9 100644
--- a/arch/arm/include/uapi/asm/setup.h
+++ b/arch/arm/include/uapi/asm/setup.h
@@ -9,7 +9,7 @@
* published by the Free Software Foundation.
*
* Structure passed to kernel to tell it about the
- * hardware it's running on. See Documentation/arm/Setup
+ * hardware it's running on. See Documentation/arch/arm/Setup
* for more info.
*/
#ifndef _UAPI__ASMARM_SETUP_H
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0b8cfdd60b90..929f6332438e 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -826,7 +826,7 @@ ENDPROC(__switch_to)
* existing ones. This mechanism should be used only for things that are
* really small and justified, and not be abused freely.
*
- * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
+ * See Documentation/arch/arm/kernel_user_helpers.txt for formal definitions.
*/
THUMB( .arm )
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index c93356a8d662..cd0878c5614f 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -106,7 +106,7 @@ void exynos_firmware_init(void);
#define C2_STATE (1 << 3)
/*
* Magic values for bootloader indicating chosen low power mode.
- * See also Documentation/arm/Samsung/Bootloader-interface.txt
+ * See also Documentation/arch/arm/Samsung/Bootloader-interface.txt
*/
#define EXYNOS_SLEEP_MAGIC 0x00000bad
#define EXYNOS_AFTR_MAGIC 0xfcba0d10
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index fc5378b00f3d..dd9c8009dffd 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -33,7 +33,7 @@ config MACH_AVILA
help
Say 'Y' here if you want your kernel to support the Gateworks
Avila Network Platform. For more information on this platform,
- see <file:Documentation/arm/IXP4xx>.
+ see <file:Documentation/arch/arm/IXP4xx>.
config MACH_LOFT
bool "Loft"
@@ -49,7 +49,7 @@ config ARCH_ADI_COYOTE
help
Say 'Y' here if you want your kernel to support the ADI
Engineering Coyote Gateway Reference Platform. For more
- information on this platform, see <file:Documentation/arm/IXP4xx>.
+ information on this platform, see <file:Documentation/arch/arm/IXP4xx>.
config MACH_GATEWAY7001
bool "Gateway 7001"
@@ -72,21 +72,21 @@ config ARCH_IXDP425
help
Say 'Y' here if you want your kernel to support Intel's
IXDP425 Development Platform (Also known as Richfield).
- For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+ For more information on this platform, see <file:Documentation/arch/arm/IXP4xx>.
config MACH_IXDPG425
bool "IXDPG425"
help
Say 'Y' here if you want your kernel to support Intel's
IXDPG425 Development Platform (Also known as Montajade).
- For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+ For more information on this platform, see <file:Documentation/arch/arm/IXP4xx>.
config MACH_IXDP465
bool "IXDP465"
help
Say 'Y' here if you want your kernel to support Intel's
IXDP465 Development Platform (Also known as BMP).
- For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+ For more information on this platform, see <file:Documentation/arch/arm/IXP4xx>.
config MACH_GORAMO_MLR
bool "GORAMO Multi Link Router"
@@ -99,7 +99,7 @@ config MACH_KIXRP435
help
Say 'Y' here if you want your kernel to support Intel's
KIXRP435 Reference Platform.
- For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+ For more information on this platform, see <file:Documentation/arch/arm/IXP4xx>.
#
# IXCDP1100 is the exact same HW as IXDP425, but with a different machine
@@ -116,7 +116,7 @@ config ARCH_PRPMC1100
help
Say 'Y' here if you want your kernel to support the Motorola
PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/IXP4xx>.
+ this platform, see <file:Documentation/arch/arm/IXP4xx>.
config MACH_NAS100D
bool
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index adcb90645460..ff605c777976 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -5,7 +5,7 @@
//
// S3C24XX Power Manager (Suspend-To-RAM) support
//
-// See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
+// See Documentation/arch/arm/Samsung-S3C24XX/Suspend.txt for more information
//
// Parts based on arch/arm/mach-pxa/pm.c
//
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index b2d45cf10a3c..b3842c971d31 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -21,7 +21,7 @@ menuconfig ARCH_STI
help
Include support for STMicroelectronics' STiH415/416, STiH407/10 and
STiH418 family SoCs using the Device Tree for discovery. More
- information can be found in Documentation/arm/sti/ and
+ information can be found in Documentation/arch/arm/sti/ and
Documentation/devicetree.
if ARCH_STI
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index cc798115aa9b..3ef82f228947 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -709,7 +709,7 @@ config ARM_VIRT_EXT
assistance.
A compliant bootloader is required in order to make maximum
- use of this feature. Refer to Documentation/arm/Booting for
+ use of this feature. Refer to Documentation/arch/arm/Booting for
details.
config SWP_EMULATE
@@ -875,7 +875,7 @@ config KUSER_HELPERS
the CPU type fitted to the system. This permits binaries to be
run on ARMv4 through to ARMv7 without modification.
- See Documentation/arm/kernel_user_helpers.txt for details.
+ See Documentation/arch/arm/kernel_user_helpers.txt for details.
However, the fixed address nature of these helpers can be used
by ROP (return orientated programming) authors when creating
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 53da57fba39c..17b18f2e4b80 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -243,7 +243,7 @@ config SAMSUNG_PM_DEBUG
depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
help
Say Y here if you want verbose debugging from the PM Suspend and
- Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+ Resume code. See <file:Documentation/arch/arm/Samsung-S3C24XX/Suspend.txt>
for more information.
config S3C_PM_DEBUG_LED_SMDK
@@ -268,7 +268,7 @@ config SAMSUNG_PM_CHECK
Note, this can take several seconds depending on memory size
and CPU speed.
- See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+ See <file:Documentation/arch/arm/Samsung-S3C24XX/Suspend.txt>
config SAMSUNG_PM_CHECK_CHUNKSIZE
int "S3C2410 PM Suspend CRC Chunksize (KiB)"
@@ -280,7 +280,7 @@ config SAMSUNG_PM_CHECK_CHUNKSIZE
the CRC data block will take more memory, but will identify any
faults with better precision.
- See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+ See <file:Documentation/arch/arm/Samsung-S3C24XX/Suspend.txt>
config SAMSUNG_WAKEMASK
bool
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 4eac94c1eb6f..84f19e0b134b 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -7,7 +7,7 @@
# http://www.arm.linux.org.uk/developer/machines/download.php
#
# Please do not send patches to this file; it is automatically generated!
-# To add an entry into this database, please see Documentation/arm/README,
+# To add an entry into this database, please see Documentation/arch/arm/README,
# or visit:
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index c085aec9459b..68d3a3af112f 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1144,7 +1144,7 @@ config KUSER_HELPERS
the system. This permits binaries to be run on ARMv4 through
to ARMv8 without modification.
- See Documentation/arm/kernel_user_helpers.txt for details.
+ See Documentation/arch/arm/kernel_user_helpers.txt for details.
However, the fixed address nature of these helpers can be used
by ROP (return orientated programming) authors when creating
diff --git a/arch/arm64/kernel/kuser32.S b/arch/arm64/kernel/kuser32.S
index 49825e9e421e..e828a1577166 100644
--- a/arch/arm64/kernel/kuser32.S
+++ b/arch/arm64/kernel/kuser32.S
@@ -10,7 +10,7 @@
* aarch32_setup_additional_pages() and are provided for compatibility
* reasons with 32 bit (aarch32) applications that need them.
*
- * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
+ * See Documentation/arch/arm/kernel_user_helpers.txt for formal definitions.
*/
#include <asm/unistd.h>
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index 1738a06396f9..cf6a5d50cf36 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -162,7 +162,7 @@ void __init plat_mem_setup(void)
ioport_resource.start = 0;
ioport_resource.end = ~0;
- /* intended to somewhat resemble ARM; see Documentation/arm/Booting */
+ /* intended to somewhat resemble ARM; see Documentation/arch/arm/Booting */
if (fw_arg0 == 0 && fw_arg1 == 0xffffffff)
dtb = phys_to_virt(fw_arg2);
else if (fw_passed_dtb) /* UHI interface or appended dtb */
diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
index 4ab14d58e85b..333c2c83d52b 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
@@ -8,7 +8,7 @@
* keysize in CBC and ECB mode.
* Add support also for DES and 3DES in CBC and ECB mode.
*
- * You could find the datasheet in Documentation/arm/sunxi/README
+ * You could find the datasheet in Documentation/arch/arm/sunxi/README
*/
#include "sun4i-ss.h"
diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-core.c b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
index cdcda7f059c8..f0af1847b632 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-core.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
@@ -6,7 +6,7 @@
*
* Core file which registers crypto algorithms supported by the SS.
*
- * You could find a link for the datasheet in Documentation/arm/sunxi/README
+ * You could find a link for the datasheet in Documentation/arch/arm/sunxi/README
*/
#include <linux/clk.h>
#include <linux/crypto.h>
diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-hash.c b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
index d2b6d89aad28..93c243aaf66e 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
@@ -6,7 +6,7 @@
*
* This file add support for MD5 and SHA1.
*
- * You could find the datasheet in Documentation/arm/sunxi/README
+ * You could find the datasheet in Documentation/arch/arm/sunxi/README
*/
#include "sun4i-ss.h"
#include <linux/scatterlist.h>
diff --git a/drivers/crypto/sunxi-ss/sun4i-ss.h b/drivers/crypto/sunxi-ss/sun4i-ss.h
index 68b82d1a6303..0fc0f9580d0c 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss.h
+++ b/drivers/crypto/sunxi-ss/sun4i-ss.h
@@ -8,7 +8,7 @@
* Support MD5 and SHA1 hash algorithms.
* Support DES and 3DES
*
- * You could find the datasheet in Documentation/arm/sunxi/README
+ * You could find the datasheet in Documentation/arch/arm/sunxi/README
*/
#include <linux/clk.h>
diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c
index 92f6e1ae23a2..3a01766a259b 100644
--- a/drivers/input/touchscreen/sun4i-ts.c
+++ b/drivers/input/touchscreen/sun4i-ts.c
@@ -22,7 +22,7 @@
* in the kernel). So this driver offers straight forward, reliable single
* touch functionality only.
*
- * s.a. A20 User Manual "1.15 TP" (Documentation/arm/sunxi/README)
+ * s.a. A20 User Manual "1.15 TP" (Documentation/arch/arm/sunxi/README)
* (looks like the description in the A20 User Manual v1.3 is better
* than the one in the A10 User Manual v.1.5)
*/
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0d31251e04cc..d6376d38079f 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -514,7 +514,7 @@ config SERIAL_SA1100
help
If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
can enable its onboard serial port by enabling this option.
- Please read <file:Documentation/arm/SA1100/serial_UART> for further
+ Please read <file:Documentation/arch/arm/SA1100/serial_UART> for further
info.
config SERIAL_SA1100_CONSOLE
--
2.19.1.856.g8858448bb