[RFC PATCH v2 02/13] powerpc: Add support for adding an ESM blob to the zImage wrapper
From: Thiago Jung Bauermann
Date: Sat Jul 13 2019 - 02:01:10 EST
From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
For secure VMs, the signing tool will create a ticket called the "ESM blob"
for the Enter Secure Mode ultravisor call with the signatures of the kernel
and initrd among other things.
This adds support to the wrapper script for adding that blob via the "-e"
option to the zImage.pseries.
It also adds code to the zImage wrapper itself to retrieve and if necessary
relocate the blob, and pass its address to Linux via the device-tree, to be
later consumed by prom_init.
Signed-off-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
[ bauerman: Minor adjustments to some comments. ]
Signed-off-by: Thiago Jung Bauermann <bauerman@xxxxxxxxxxxxx>
---
arch/powerpc/boot/main.c | 41 ++++++++++++++++++++++++++++++++++
arch/powerpc/boot/ops.h | 2 ++
arch/powerpc/boot/wrapper | 24 +++++++++++++++++---
arch/powerpc/boot/zImage.lds.S | 8 +++++++
4 files changed, 72 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c
index 78aaf4ffd7ab..ca612efd3e81 100644
--- a/arch/powerpc/boot/main.c
+++ b/arch/powerpc/boot/main.c
@@ -150,6 +150,46 @@ static struct addr_range prep_initrd(struct addr_range vmlinux, void *chosen,
return (struct addr_range){(void *)initrd_addr, initrd_size};
}
+#ifdef __powerpc64__
+static void prep_esm_blob(struct addr_range vmlinux, void *chosen)
+{
+ unsigned long esm_blob_addr, esm_blob_size;
+
+ /* Do we have an ESM (Enter Secure Mode) blob? */
+ if (_esm_blob_end <= _esm_blob_start)
+ return;
+
+ printf("Attached ESM blob at 0x%p-0x%p\n\r",
+ _esm_blob_start, _esm_blob_end);
+ esm_blob_addr = (unsigned long)_esm_blob_start;
+ esm_blob_size = _esm_blob_end - _esm_blob_start;
+
+ /*
+ * If the ESM blob is too low it will be clobbered when the
+ * kernel relocates to its final location. In this case,
+ * allocate a safer place and move it.
+ */
+ if (esm_blob_addr < vmlinux.size) {
+ void *old_addr = (void *)esm_blob_addr;
+
+ printf("Allocating 0x%lx bytes for esm_blob ...\n\r",
+ esm_blob_size);
+ esm_blob_addr = (unsigned long)malloc(esm_blob_size);
+ if (!esm_blob_addr)
+ fatal("Can't allocate memory for ESM blob !\n\r");
+ printf("Relocating ESM blob 0x%lx <- 0x%p (0x%lx bytes)\n\r",
+ esm_blob_addr, old_addr, esm_blob_size);
+ memmove((void *)esm_blob_addr, old_addr, esm_blob_size);
+ }
+
+ /* Tell the kernel ESM blob address via device tree. */
+ setprop_val(chosen, "linux,esm-blob-start", (u32)(esm_blob_addr));
+ setprop_val(chosen, "linux,esm-blob-end", (u32)(esm_blob_addr + esm_blob_size));
+}
+#else
+static inline void prep_esm_blob(struct addr_range vmlinux, void *chosen) { }
+#endif
+
/* A buffer that may be edited by tools operating on a zImage binary so as to
* edit the command line passed to vmlinux (by setting /chosen/bootargs).
* The buffer is put in it's own section so that tools may locate it easier.
@@ -218,6 +258,7 @@ void start(void)
vmlinux = prep_kernel();
initrd = prep_initrd(vmlinux, chosen,
loader_info.initrd_addr, loader_info.initrd_size);
+ prep_esm_blob(vmlinux, chosen);
prep_cmdline(chosen);
printf("Finalizing device tree...");
diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h
index cd043726ed88..e0606766480f 100644
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@@ -251,6 +251,8 @@ extern char _initrd_start[];
extern char _initrd_end[];
extern char _dtb_start[];
extern char _dtb_end[];
+extern char _esm_blob_start[];
+extern char _esm_blob_end[];
static inline __attribute__((const))
int __ilog2_u32(u32 n)
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 4ed18d63d892..ddb62b5b5b7a 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -14,6 +14,7 @@
# -i initrd specify initrd file
# -d devtree specify device-tree blob
# -s tree.dts specify device-tree source file (needs dtc installed)
+# -e esm_blob specify ESM blob for secure images
# -c cache $kernel.strip.gz (use if present & newer, else make)
# -C prefix specify command prefix for cross-building tools
# (strip, objcopy, ld)
@@ -38,6 +39,7 @@ platform=of
initrd=
dtb=
dts=
+esm_blob=
cacheit=
binary=
compression=.gz
@@ -61,9 +63,9 @@ tmpdir=.
usage() {
echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2
- echo ' [-d devtree] [-s tree.dts] [-c] [-C cross-prefix]' >&2
- echo ' [-D datadir] [-W workingdir] [-Z (gz|xz|none)]' >&2
- echo ' [--no-compression] [vmlinux]' >&2
+ echo ' [-d devtree] [-s tree.dts] [-e esm_blob]' >&2
+ echo ' [-c] [-C cross-prefix] [-D datadir] [-W workingdir]' >&2
+ echo ' [-Z (gz|xz|none)] [--no-compression] [vmlinux]' >&2
exit 1
}
@@ -106,6 +108,11 @@ while [ "$#" -gt 0 ]; do
[ "$#" -gt 0 ] || usage
dtb="$1"
;;
+ -e)
+ shift
+ [ "$#" -gt 0 ] || usage
+ esm_blob="$1"
+ ;;
-s)
shift
[ "$#" -gt 0 ] || usage
@@ -219,9 +226,16 @@ objflags=-S
tmp=$tmpdir/zImage.$$.o
ksection=.kernel:vmlinux.strip
isection=.kernel:initrd
+esection=.kernel:esm_blob
link_address='0x400000'
make_space=y
+
+if [ -n "$esm_blob" -a "$platform" != "pseries" ]; then
+ echo "ESM blob not support on non-pseries platforms" >&2
+ exit 1
+fi
+
case "$platform" in
of)
platformo="$object/of.o $object/epapr.o"
@@ -478,6 +492,10 @@ if [ -n "$dtb" ]; then
fi
fi
+if [ -n "$esm_blob" ]; then
+ addsec $tmp "$esm_blob" $esection
+fi
+
if [ "$platform" != "miboot" ]; then
if [ -n "$link_address" ] ; then
text_start="-Ttext $link_address"
diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S
index 4ac1e36edfe7..a21f3a76e06f 100644
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -68,6 +68,14 @@ SECTIONS
_initrd_end = .;
}
+ . = ALIGN(4096);
+ .kernel:esm_blob :
+ {
+ _esm_blob_start = .;
+ *(.kernel:esm_blob)
+ _esm_blob_end = .;
+ }
+
#ifdef CONFIG_PPC64_BOOT_WRAPPER
. = ALIGN(256);
.got :