Re: ARM/gic-v4: deadlock occurred

[Marc Zyngier]

On Sat, 13 Jul 2019 19:08:57 +0800
Guoheyi <guoheyi@xxxxxxxxxx> wrote:

Hi Heyi,

> Hi Marc,
> 
> Really sorry for the delay of testing the rework patches. I picked up
> the work these days and applied the patches to our 4.19.36 stable
> branch. However, I got below panic during the boot process of host
> (not yet to boot guests).
> 
> I supposed the result was not related with my testing kernel version,
> for we don't have many differences in ITS driver; I can test against
> mainline if you think it is necessary.

In general, please report bugs against mainline. There isn't much I can
do about your private tree...

That being said, a couple of comments below.

> Thanks,
> 
> Heyi
> 
> 
> [   16.990413] iommu: Adding device 0000:00:00.0 to group 6
> [   17.000691] pcieport 0000:00:00.0: Signaling PME with IRQ 133
> [   17.006456] pcieport 0000:00:00.0: AER enabled with IRQ 134
> [   17.012151] iommu: Adding device 0000:00:08.0 to group 7
> [   17.018575] Unable to handle kernel paging request at virtual address 00686361635f746f
> [   17.026467] Mem abort info:
> [   17.029251]   ESR = 0x96000004
> [   17.032313]   Exception class = DABT (current EL), IL = 32 bits
> [   17.038207]   SET = 0, FnV = 0
> [   17.041258]   EA = 0, S1PTW = 0
> [   17.044391] Data abort info:
> [   17.047260]   ISV = 0, ISS = 0x00000004
> [   17.051081]   CM = 0, WnR = 0
> [   17.054035] [00686361635f746f] address between user and kernel address ranges
> [   17.061140] Internal error: Oops: 96000004 [#1] SMP
> [   17.065997] Process kworker/0:4 (pid: 889, stack limit = 0x(____ptrval____))
> [   17.073013] CPU: 0 PID: 889 Comm: kworker/0:4 Not tainted 4.19.36+ #8
> [   17.079422] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 0.52 06/20/2019
> [   17.086788] Workqueue: events work_for_cpu_fn
> [   17.091126] pstate: 20c00009 (nzCv daif +PAN +UAO)
> [   17.095895] pc : __kmalloc_track_caller+0xb0/0x2a0
> [   17.100662] lr : __kmalloc_track_caller+0x64/0x2a0
> [   17.105429] sp : ffff00002920ba00
> [   17.108728] x29: ffff00002920ba00 x28: ffff802cb6792780
> [   17.114015] x27: 00000000006080c0 x26: 00000000006000c0
> [   17.119302] x25: ffff0000084c8a00 x24: ffff802cbfc0fc00
> [   17.124588] x23: ffff802cbfc0fc00 x22: ffff0000084c8a00
> [   17.129875] x21: 0000000000000004 x20: 00000000006000c0
> [   17.135161] x19: 65686361635f746f x18: ffffffffffffffff
> [   17.140448] x17: 000000000000000e x16: 0000000000000007
> [   17.145734] x15: ffff000009119708 x14: 0000000000000000
> [   17.151021] x13: 0000000000000003 x12: 0000000000000000
> [   17.156307] x11: 0000000005f5e0ff x10: ffff00002920bb80
> [   17.161594] x9 : 00000000ffffffd0 x8 : 0000000000000098
> [   17.166880] x7 : ffff00002920bb80 x6 : ffff000008a8cb98
> [   17.172167] x5 : 000000000000a705 x4 : ffff803f802d22e0
> [   17.177453] x3 : ffff00002920b990 x2 : ffff7e00b2dafd00
> [   17.182740] x1 : 0000803f77476000 x0 : 0000000000000000
> [   17.188027] Call trace:
> [   17.190461]  __kmalloc_track_caller+0xb0/0x2a0
> [   17.194886]  kvasprintf+0x7c/0x108
> [   17.198271]  kasprintf+0x60/0x80
> [   17.201488]  populate_msi_sysfs+0xe4/0x250
> [   17.205564]  __pci_enable_msi_range+0x278/0x450
> [   17.210073]  pci_alloc_irq_vectors_affinity+0xd4/0x110
> [   17.215188]  pcie_port_device_register+0x134/0x558
> [   17.219955]  pcie_portdrv_probe+0x3c/0xf0
> [   17.223947]  local_pci_probe+0x44/0xa8
> [   17.227679]  work_for_cpu_fn+0x20/0x30
> [   17.231411]  process_one_work+0x1b4/0x3f8
> [   17.235401]  worker_thread+0x210/0x470
> [   17.239134]  kthread+0x134/0x138
> [   17.242348]  ret_from_fork+0x10/0x18
> [   17.245907] Code: f100005f fa401a64 54000bc0 b9402300 (f8606a66)
> [   17.251970] kernel fault(0x1) notification starting on CPU 0
> [   17.257602] kernel fault(0x1) notification finished on CPU 0
> [   17.263234] Modules linked in:
> [   17.266277] ---[ end trace 023e6b19cb68b94f ]---

What in this trace makes you think that this has anything to do with an
ITS change? The system crashes in a completely unrelated piece of code.
Also, if you look at the VA that indicates the crash, it should be
obvious that this isn't a kernel address. Worse, this is a piece of
ASCII text:

$ echo 00686361635f746f | xxd -r -p
hcac_to

This tends to indicate some memory form of corruption ("hcac_to" looks
like the begining of a symbol), and I'm not sure how the ITS would be
involved in this... Furthermore, this happens on the host at boot time,
while the patch you suspect only affects VMs...

I think you need to spend more time analysing this issue.

Thanks,

	M.
-- 
Without deviation from the norm, progress is not possible.