Re: [PATCH v6 14/14] arm64: dts: Add power controller device node of MT8183

From: CK Hu
Date: Mon Jul 15 2019 - 04:07:43 EST

Hi, Weiyi:

On Mon, 2019-07-01 at 16:57 +0800, CK Hu wrote:
> Hi, Weiyi:
>
> On Thu, 2019-06-20 at 10:38 +0800, Weiyi Lu wrote:
> > Add power controller node and smi-common node for MT8183
> > In scpsys node, it contains clocks and regmapping of
> > infracfg and smi-common for bus protection.
> >
> > Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 62 ++++++++++++++++++++++++++++++++
> > 1 file changed, 62 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index 08274bf..75c4881 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > @@ -8,6 +8,7 @@
> > #include <dt-bindings/clock/mt8183-clk.h>
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/power/mt8183-power.h>
> >
> > / {
> > compatible = "mediatek,mt8183";
> > @@ -196,6 +197,62 @@
> > #clock-cells = <1>;
> > };
> >
> > + scpsys: syscon@10006000 {
> > + compatible = "mediatek,mt8183-scpsys", "syscon";
> > + #power-domain-cells = <1>;
> > + reg = <0 0x10006000 0 0x1000>;
> > + clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
> > + <&infracfg CLK_INFRA_AUDIO>,
> > + <&infracfg CLK_INFRA_AUDIO_26M_BCLK>,
> > + <&topckgen CLK_TOP_MUX_MFG>,
> > + <&topckgen CLK_TOP_MUX_MM>,
> > + <&topckgen CLK_TOP_MUX_CAM>,
> > + <&topckgen CLK_TOP_MUX_IMG>,
> > + <&topckgen CLK_TOP_MUX_IPU_IF>,
> > + <&topckgen CLK_TOP_MUX_DSP>,
> > + <&topckgen CLK_TOP_MUX_DSP1>,
> > + <&topckgen CLK_TOP_MUX_DSP2>,
> > + <&mmsys CLK_MM_SMI_COMMON>,
> > + <&mmsys CLK_MM_SMI_LARB0>,
> > + <&mmsys CLK_MM_SMI_LARB1>,
> > + <&mmsys CLK_MM_GALS_COMM0>,
> > + <&mmsys CLK_MM_GALS_COMM1>,
> > + <&mmsys CLK_MM_GALS_CCU2MM>,
> > + <&mmsys CLK_MM_GALS_IPU12MM>,
> > + <&mmsys CLK_MM_GALS_IMG2MM>,
> > + <&mmsys CLK_MM_GALS_CAM2MM>,
> > + <&mmsys CLK_MM_GALS_IPU2MM>,

I've removed all mmsys clock in scpsys node and display still works, so
I think these subsys clock could be removed from scpsys node. It's
reasonable that subsys clock is controlled by subsys device or the
device use it. In MT2712 [1], the scpsys does not control subsys clock
and it works, so I think you should remove subsys clock in scpsys device
node.

[1]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/mediatek/mt2712e.dtsi?h=v5.2

Regards,
CK


>
> Up to now, MT8183 mmsys has the same resource with another device node:
>
> mmsys: syscon@14000000 {
> compatible = "mediatek,mt8183-mmsys", "syscon";
> reg = <0 0x14000000 0 0x1000>;
> #clock-cells = <1>;
> };
>
> display_components: dispsys@14000000 {
> compatible = "mediatek,mt8183-display";
> reg = <0 0x14000000 0 0x1000>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> };
>
> I think this two node should be merge into one node, so I've try to
> merge them:
>
> mmsys: syscon@14000000 {
> compatible = "mediatek,mt8183-mmsys", "syscon";
> reg = <0 0x14000000 0 0x1000>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> #clock-cells = <1>;
> };
>
> But I got a kernel panic when boot,
>
> [ 3.458523] Unable to handle kernel paging request at virtual address
> fffffffffffffdfb
> [ 3.466999] Mem abort info:
> [ 3.470116] ESR = 0x96000005
> [ 3.473268] Exception class = DABT (current EL), IL = 32 bits
> [ 3.479375] SET = 0, FnV = 0
> [ 3.482530] EA = 0, S1PTW = 0
> [ 3.485785] Data abort info:
> [ 3.488831] ISV = 0, ISS = 0x00000005
> [ 3.493067] CM = 0, WnR = 0
> [ 3.496229] swapper pgtable: 4k pages, 39-bit VAs, pgdp =
> 000000004f8fa26d
> [ 3.503214] [fffffffffffffdfb] pgd=0000000000000000,
> pud=0000000000000000
> [ 3.510408] Internal error: Oops: 96000005 [#1] PREEMPT SMP
> [ 3.515974] Modules linked in:
> [ 3.519023] Process kworker/0:3 (pid: 106, stack limit =
> 0x00000000281d0651)
> [ 3.526066] CPU: 0 PID: 106 Comm: kworker/0:3 Tainted: G W
> 4.19.43 #208
> [ 3.533974] Hardware name: MediaTek kukui rev1 board (DT)
> [ 3.539374] Workqueue: events deferred_probe_work_func
> [ 3.544507] pstate: 20000005 (nzCv daif -PAN -UAO)
> [ 3.549294] pc : clk_prepare+0x18/0x40
> [ 3.553038] lr : scpsys_clk_enable+0x40/0xb4
> [ 3.557299] sp : ffffff800855b9e0
> [ 3.560606] x29: ffffff800855b9f0 x28: ffffff93e1e5f594
> [ 3.565911] x27: 000000000000000f x26: ffffff93e1e5e9b8
> [ 3.571217] x25: 000000003b9aca00 x24: ffffff800858530c
> [ 3.576522] x23: ffffffffffffffff x22: fffffffffffffdfb
> [ 3.581827] x21: 000000000000000a x20: ffffffccb89aafc8
> [ 3.587132] x19: fffffffffffffdfb x18: 00005a5c77082016
> [ 3.592438] x17: 0000000000000400 x16: 0000000000000001
> [ 3.597743] x15: 0000000000000009 x14: ffffff93e271c908
> [ 3.603048] x13: 0000000000000b22 x12: 0000000000000008
> [ 3.608353] x11: 0000000001d063de x10: 0000000000000008
> [ 3.613659] x9 : 00000000ffffffed x8 : 0000000000000000
> [ 3.618964] x7 : 736d6c2dff7224fe x6 : 0000008000000000
> [ 3.624269] x5 : 0000000000000000 x4 : 0000000080000000
> [ 3.629575] x3 : 002f6d6e74000000 x2 : 0000000000000000
> [ 3.634880] x1 : 000000000000000a x0 : fffffffffffffdfb
> [ 3.640185] Call trace:
> [ 3.642625] clk_prepare+0x18/0x40
> [ 3.646019] scpsys_clk_enable+0x40/0xb4
> [ 3.649935] scpsys_power_on+0x13c/0x304
> [ 3.653850] scpsys_probe+0xe0/0x5fc
> [ 3.657419] platform_drv_probe+0x80/0xb0
> [ 3.661420] really_probe+0x114/0x28c
> [ 3.665075] driver_probe_device+0x64/0xfc
> [ 3.669164] __device_attach_driver+0xb8/0xd0
> [ 3.673513] bus_for_each_drv+0x88/0xd0
> [ 3.677341] __device_attach+0xac/0x130
> [ 3.681169] device_initial_probe+0x20/0x2c
> [ 3.685344] bus_probe_device+0x34/0x90
> [ 3.689172] deferred_probe_work_func+0x74/0xac
> [ 3.693698] process_one_work+0x210/0x420
> [ 3.697700] worker_thread+0x278/0x3e4
> [ 3.701443] kthread+0x11c/0x12c
> [ 3.704665] ret_from_fork+0x10/0x18
>
> I'm not really understand what happen, but scpsys and mmsys point to
> each other in MT8183. Why these two node point to each other in MT8183?
> If this is really hardware limitation, we need to solve this in driver.
> If this is not a hardware limitation, I would like to re-organize device
> tree to prevent this problem.
>
> Regards,
> CK
>
>
> > + <&imgsys CLK_IMG_LARB5>,
> > + <&imgsys CLK_IMG_LARB2>,
> > + <&camsys CLK_CAM_LARB6>,
> > + <&camsys CLK_CAM_LARB3>,
> > + <&camsys CLK_CAM_SENINF>,
> > + <&camsys CLK_CAM_CAMSV0>,
> > + <&camsys CLK_CAM_CAMSV1>,
> > + <&camsys CLK_CAM_CAMSV2>,
> > + <&camsys CLK_CAM_CCU>,
> > + <&ipu_conn CLK_IPU_CONN_IPU>,
> > + <&ipu_conn CLK_IPU_CONN_AHB>,
> > + <&ipu_conn CLK_IPU_CONN_AXI>,
> > + <&ipu_conn CLK_IPU_CONN_ISP>,
> > + <&ipu_conn CLK_IPU_CONN_CAM_ADL>,
> > + <&ipu_conn CLK_IPU_CONN_IMG_ADL>;
> > + clock-names = "audio", "audio1", "audio2",
> > + "mfg", "mm", "cam",
> > + "isp", "vpu", "vpu1",
> > + "vpu2", "vpu3", "mm-0",
> > + "mm-1", "mm-2", "mm-3",
> > + "mm-4", "mm-5", "mm-6",
> > + "mm-7", "mm-8", "mm-9",
> > + "isp-0", "isp-1", "cam-0",
> > + "cam-1", "cam-2", "cam-3",
> > + "cam-4", "cam-5", "cam-6",
> > + "vpu-0", "vpu-1", "vpu-2",
> > + "vpu-3", "vpu-4", "vpu-5";
> > + infracfg = <&infracfg>;
> > + smi_comm = <&smi_common>;
> > + };
> > +
> > apmixedsys: syscon@1000c000 {
> > compatible = "mediatek,mt8183-apmixedsys", "syscon";
> > reg = <0 0x1000c000 0 0x1000>;
> > @@ -260,6 +317,11 @@
> > #clock-cells = <1>;
> > };
> >
> > + smi_common: smi@14019000 {
> > + compatible = "mediatek,mt8183-smi-common", "syscon";
> > + reg = <0 0x14019000 0 0x1000>;
> > + };
> > +
> > imgsys: syscon@15020000 {
> > compatible = "mediatek,mt8183-imgsys", "syscon";
> > reg = <0 0x15020000 0 0x1000>;
>