[PATCH 1/6] leds: apu: drop superseeded apu2/3 led support
From: Enrico Weigelt, metux IT consult
Date: Mon Jul 15 2019 - 10:57:55 EST
From: Enrico Weigelt <info@xxxxxxxxx>
This driver only supports gpio-attached LEDs on apu1/2/3 boards,
but neither gpio's themselves, nor other gpio-attached devices
(eg. front button).
For apu2+ a newer, more complete driver exists, based on a generic
driver for the AMD SOCs gpio-controller, supporting LEDs as well
other devices. Therefore these boards don't need legacy support
from this driver anymore.
Both drivers claim the same device, so only one driver may exist
in a system, putting distros in the position to decide between
either apu2+ keys or apu1 led support.
Therefore drop the apu2+ led support from the old driver, solve
the conflict and reduce unnecessary code.
Signed-off-by: Enrico Weigelt <info@xxxxxxxxx>
---
drivers/leds/Kconfig | 5 +-
drivers/leds/leds-apu.c | 124 +++---------------------------------------------
2 files changed, 10 insertions(+), 119 deletions(-)
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b0fdeef..f7a3dd7 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -74,9 +74,12 @@ config LEDS_APU
depends on LEDS_CLASS
depends on X86 && DMI
help
- This driver makes the PC Engines APU/APU2/APU3 front panel LEDs
+ This driver makes the PC Engines APU1 front panel LEDs
accessible from userspace programs through the LED subsystem.
+ If you're looking for APU2/3, use the pcengines-apu2 driver.
+ (symbol CONFIG_PCENGINES_APU2)
+
To compile this driver as a module, choose M here: the
module will be called leds-apu.
diff --git a/drivers/leds/leds-apu.c b/drivers/leds/leds-apu.c
index 8d42e46..140093a 100644
--- a/drivers/leds/leds-apu.c
+++ b/drivers/leds/leds-apu.c
@@ -47,12 +47,6 @@
#define APU1_NUM_GPIO 3
#define APU1_IOSIZE sizeof(u8)
-#define APU2_FCH_ACPI_MMIO_BASE 0xFED80000
-#define APU2_FCH_GPIO_BASE (APU2_FCH_ACPI_MMIO_BASE + 0x1500)
-#define APU2_GPIO_BIT_WRITE 22
-#define APU2_APU2_NUM_GPIO 4
-#define APU2_IOSIZE sizeof(u32)
-
/* LED access parameters */
struct apu_param {
void __iomem *addr; /* for ioread/iowrite */
@@ -75,7 +69,6 @@ struct apu_led_profile {
/* Supported platform types */
enum apu_led_platform_types {
APU1_LED_PLATFORM,
- APU2_LED_PLATFORM,
};
struct apu_led_pdata {
@@ -96,19 +89,6 @@ struct apu_led_pdata {
{ "apu:green:3", LED_OFF, APU1_FCH_GPIO_BASE + 2 * APU1_IOSIZE },
};
-static const struct apu_led_profile apu2_led_profile[] = {
- { "apu2:green:1", LED_ON, APU2_FCH_GPIO_BASE + 68 * APU2_IOSIZE },
- { "apu2:green:2", LED_OFF, APU2_FCH_GPIO_BASE + 69 * APU2_IOSIZE },
- { "apu2:green:3", LED_OFF, APU2_FCH_GPIO_BASE + 70 * APU2_IOSIZE },
-};
-
-/* Same as apu2_led_profile, but with "3" in the LED names. */
-static const struct apu_led_profile apu3_led_profile[] = {
- { "apu3:green:1", LED_ON, APU2_FCH_GPIO_BASE + 68 * APU2_IOSIZE },
- { "apu3:green:2", LED_OFF, APU2_FCH_GPIO_BASE + 69 * APU2_IOSIZE },
- { "apu3:green:3", LED_OFF, APU2_FCH_GPIO_BASE + 70 * APU2_IOSIZE },
-};
-
static const struct dmi_system_id apu_led_dmi_table[] __initconst = {
{
.ident = "apu",
@@ -117,54 +97,6 @@ struct apu_led_pdata {
DMI_MATCH(DMI_PRODUCT_NAME, "APU")
}
},
- /* PC Engines APU2 with "Legacy" bios < 4.0.8 */
- {
- .ident = "apu2",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
- DMI_MATCH(DMI_BOARD_NAME, "APU2")
- }
- },
- /* PC Engines APU2 with "Legacy" bios >= 4.0.8 */
- {
- .ident = "apu2",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
- DMI_MATCH(DMI_BOARD_NAME, "apu2")
- }
- },
- /* PC Engines APU2 with "Mainline" bios */
- {
- .ident = "apu2",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
- DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu2")
- }
- },
- /* PC Engines APU3 with "Legacy" bios < 4.0.8 */
- {
- .ident = "apu3",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
- DMI_MATCH(DMI_BOARD_NAME, "APU3")
- }
- },
- /* PC Engines APU3 with "Legacy" bios >= 4.0.8 */
- {
- .ident = "apu3",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
- DMI_MATCH(DMI_BOARD_NAME, "apu3")
- }
- },
- /* PC Engines APU2 with "Mainline" bios */
- {
- .ident = "apu3",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
- DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu3")
- }
- },
{}
};
MODULE_DEVICE_TABLE(dmi, apu_led_dmi_table);
@@ -178,25 +110,6 @@ static void apu1_led_brightness_set(struct led_classdev *led, enum led_brightnes
spin_unlock(&apu_led->lock);
}
-static void apu2_led_brightness_set(struct led_classdev *led, enum led_brightness value)
-{
- struct apu_led_priv *pled = cdev_to_priv(led);
- u32 value_new;
-
- spin_lock(&apu_led->lock);
-
- value_new = ioread32(pled->param.addr);
-
- if (value)
- value_new &= ~BIT(APU2_GPIO_BIT_WRITE);
- else
- value_new |= BIT(APU2_GPIO_BIT_WRITE);
-
- iowrite32(value_new, pled->param.addr);
-
- spin_unlock(&apu_led->lock);
-}
-
static int apu_led_config(struct device *dev, struct apu_led_pdata *apuld)
{
int i;
@@ -219,8 +132,6 @@ static int apu_led_config(struct device *dev, struct apu_led_pdata *apuld)
led_cdev->flags = LED_CORE_SUSPENDRESUME;
if (apu_led->platform == APU1_LED_PLATFORM)
led_cdev->brightness_set = apu1_led_brightness_set;
- else if (apu_led->platform == APU2_LED_PLATFORM)
- led_cdev->brightness_set = apu2_led_brightness_set;
pled->param.addr = devm_ioremap(dev,
apu_led->profile[i].offset, apu_led->iosize);
@@ -254,27 +165,10 @@ static int __init apu_led_probe(struct platform_device *pdev)
apu_led->pdev = pdev;
- if (dmi_match(DMI_PRODUCT_NAME, "APU")) {
- apu_led->profile = apu1_led_profile;
- apu_led->platform = APU1_LED_PLATFORM;
- apu_led->num_led_instances = ARRAY_SIZE(apu1_led_profile);
- apu_led->iosize = APU1_IOSIZE;
- } else if (dmi_match(DMI_BOARD_NAME, "APU2") ||
- dmi_match(DMI_BOARD_NAME, "apu2") ||
- dmi_match(DMI_BOARD_NAME, "PC Engines apu2")) {
- apu_led->profile = apu2_led_profile;
- apu_led->platform = APU2_LED_PLATFORM;
- apu_led->num_led_instances = ARRAY_SIZE(apu2_led_profile);
- apu_led->iosize = APU2_IOSIZE;
- } else if (dmi_match(DMI_BOARD_NAME, "APU3") ||
- dmi_match(DMI_BOARD_NAME, "apu3") ||
- dmi_match(DMI_BOARD_NAME, "PC Engines apu3")) {
- apu_led->profile = apu3_led_profile;
- /* Otherwise identical to APU2. */
- apu_led->platform = APU2_LED_PLATFORM;
- apu_led->num_led_instances = ARRAY_SIZE(apu3_led_profile);
- apu_led->iosize = APU2_IOSIZE;
- }
+ apu_led->profile = apu1_led_profile;
+ apu_led->platform = APU1_LED_PLATFORM;
+ apu_led->num_led_instances = ARRAY_SIZE(apu1_led_profile);
+ apu_led->iosize = APU1_IOSIZE;
spin_lock_init(&apu_led->lock);
return apu_led_config(&pdev->dev, apu_led);
@@ -295,13 +189,7 @@ static int __init apu_led_init(void)
pr_err("No PC Engines board detected\n");
return -ENODEV;
}
- if (!(dmi_match(DMI_PRODUCT_NAME, "APU") ||
- dmi_match(DMI_PRODUCT_NAME, "APU2") ||
- dmi_match(DMI_PRODUCT_NAME, "apu2") ||
- dmi_match(DMI_PRODUCT_NAME, "PC Engines apu2") ||
- dmi_match(DMI_PRODUCT_NAME, "APU3") ||
- dmi_match(DMI_PRODUCT_NAME, "apu3") ||
- dmi_match(DMI_PRODUCT_NAME, "PC Engines apu3"))) {
+ if (!(dmi_match(DMI_PRODUCT_NAME, "APU"))) {
pr_err("Unknown PC Engines board: %s\n",
dmi_get_system_info(DMI_PRODUCT_NAME));
return -ENODEV;
@@ -337,6 +225,6 @@ static void __exit apu_led_exit(void)
module_exit(apu_led_exit);
MODULE_AUTHOR("Alan Mizrahi");
-MODULE_DESCRIPTION("PC Engines APU family LED driver");
+MODULE_DESCRIPTION("PC Engines APU1 front LED driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:leds_apu");
--
1.9.1