[PATCH v2 5/5] arm64: dts: qcom: sdm845-cheza: remove macro from unit name

[Vinod Koul]

Unit address is supposed to be a number, using a macro with hex value is
not recommended, so add the value in unit name.

arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:966.16-969.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4d: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:971.16-974.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4e: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:976.16-979.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x4f: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:981.16-984.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x50: unit name should not have leading "0x"
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi:986.16-989.4: Warning (unit_address_format): /soc@0/spmi@c440000/pmic@0/adc@3100/adc-chan@0x51: unit name should not have leading "0x"

Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 1ebbd568dfd7..9b27b8346ba1 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -963,27 +963,27 @@ ap_ts_i2c: &i2c14 {
 };
 
 &pm8998_adc {
-	adc-chan@ADC5_AMUX_THM1_100K_PU {
+	adc-chan@4d {
 		reg = <ADC5_AMUX_THM1_100K_PU>;
 		label = "sdm_temp";
 	};
 
-	adc-chan@ADC5_AMUX_THM2_100K_PU {
+	adc-chan@4e {
 		reg = <ADC5_AMUX_THM2_100K_PU>;
 		label = "quiet_temp";
 	};
 
-	adc-chan@ADC5_AMUX_THM3_100K_PU {
+	adc-chan@4f {
 		reg = <ADC5_AMUX_THM3_100K_PU>;
 		label = "lte_temp_1";
 	};
 
-	adc-chan@ADC5_AMUX_THM4_100K_PU {
+	adc-chan@50 {
 		reg = <ADC5_AMUX_THM4_100K_PU>;
 		label = "lte_temp_2";
 	};
 
-	adc-chan@ADC5_AMUX_THM5_100K_PU {
+	adc-chan@51 {
 		reg = <ADC5_AMUX_THM5_100K_PU>;
 		label = "charger_temp";
 	};
-- 
2.20.1