Re: [RFC/RFT 4/5] phy: exynos5-usbdrd: PIPE3 tune signal

[Krzysztof Kozlowski]

On Mon, 22 Jul 2019 at 20:59, Anand Moon <linux.amoon@xxxxxxxxx> wrote:
>
> Tune USB3.0 (PIPE3) PHY TX signal for high and supper
> speed data transfer.
>
> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> ---
>  drivers/phy/samsung/phy-exynos5-usbdrd.c | 18 +++++++++++++-----
>  1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
> index 54a513ca15e4..4f16c4f82ae5 100644
> --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
> +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
> @@ -124,8 +124,10 @@
>
>  #define EXYNOS5_DRD_PHYPARAM1                  0x20
>
> -#define PHYPARAM1_PCS_TXDEEMPH_MASK            (0x1f << 0)
> -#define PHYPARAM1_PCS_TXDEEMPH                 (0x1c)
> +#define PHYPARAM1_TX0_TERM_OFFSET(x)           __set(x, 30, 26)
> +#define PHYPARAM1_TX_SWING_FULL(x)             __set(x, 18, 12)
> +#define PHYPRAAM1_PCS_TX_DEEMPH_6DB(x)         __set(x, 11, 6)
> +#define PHYPRAAM1_PCS_TX_DEEMPH_3P5DB(x)       __set(x, 5, 0)
>
>  #define EXYNOS5_DRD_PHYTERM                    0x24
>
> @@ -360,10 +362,16 @@ static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd)
>  {
>         u32 reg;
>
> -       reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
>         /* Set Tx De-Emphasis level */
> -       reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
> -       reg |=  PHYPARAM1_PCS_TXDEEMPH;
> +       reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
> +               /* Transmitter Termination Offset */
> +       reg |=  PHYPARAM1_TX0_TERM_OFFSET(0x5) |
> +               /* Tx Amplitude (Full Swing mode) */
> +               PHYPARAM1_TX_SWING_FULL(0x3F) |
> +               /* Tx De-Emphasis at 6 dB */
> +               PHYPRAAM1_PCS_TX_DEEMPH_6DB(0x20) |
> +               /* Tx De-Emphasis at 3.5 dB */
> +               PHYPRAAM1_PCS_TX_DEEMPH_3P5DB(0x15);

How did you get the value? Why you are changing existing values to default ones?

Best regards,
Krzysztof

>         writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
>
>         reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
> --
> 2.22.0
>