Re: [PATCHv2 2/3] fpga: altera-cvp: Preparation for V2 parts.

[Moritz Fischer]

On Tue, Jul 23, 2019 at 09:40:51AM -0500, Thor Thayer wrote:
> Hi Moritz,
> 
> On 7/21/19 7:59 PM, Moritz Fischer wrote:
> > Thor,
> > 
> > On Tue, Jul 16, 2019 at 05:48:06PM -0500, thor.thayer@xxxxxxxxxxxxxxx wrote:
> > > From: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>
> > > 
> > > In preparation for adding newer V2 parts that use a FIFO,
> > > reorganize altera_cvp_chk_error() and change the write
> > > function to block based.
> > > V2 parts have a block size matching the FIFO while older
> > > V1 parts write a 32 bit word at a time.
> > > 
> > > Signed-off-by: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>
> > > ---
> > > v2 Remove inline function declaration
> > >     Reverse Christmas Tree format for local variables
> > > ---
> > >   drivers/fpga/altera-cvp.c | 72 ++++++++++++++++++++++++++++++-----------------
> > >   1 file changed, 46 insertions(+), 26 deletions(-)
> > > 
> > > diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
> > > index b78c90580071..37419d6b9915 100644
> > > --- a/drivers/fpga/altera-cvp.c
> > > +++ b/drivers/fpga/altera-cvp.c
> > > @@ -140,6 +140,41 @@ static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask,
> > >   	return -ETIMEDOUT;
> > >   }
> > > +static int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
> > > +{
> > > +	struct altera_cvp_conf *conf = mgr->priv;
> > > +	u32 val;
> > > +
> > > +	/* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
> > > +	altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
> > Same as in the other email, why can we ignore return values here. I
> > think the original code probably did that already.
> 
> Yes, I actually didn't make any changes to this function. You can see I
> moved it from below since it is used in the following function.
> 
> I'm not checking the return code from any of the read/write functions since
> the original driver didn't. Would you prefer I check and issue a warning?

Not sure a warning would change much here. We should probably look at
why it was ok in the first place.
> 
> Thanks for reviewing!
> 
> > > +	if (val & VSE_CVP_STATUS_CFG_ERR) {
> > > +		dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
> > > +			bytes);
> > > +		return -EPROTO;
> > > +	}
> > > +	return 0;
> > > +}
> > > +
> > > +static int altera_cvp_send_block(struct altera_cvp_conf *conf,
> > > +				 const u32 *data, size_t len)
> > > +{
> > > +	u32 mask, words = len / sizeof(u32);
> > > +	int i, remainder;
> > > +
> > > +	for (i = 0; i < words; i++)
> > > +		conf->write_data(conf, *data++);
> > > +
> > > +	/* write up to 3 trailing bytes, if any */
> > > +	remainder = len % sizeof(u32);
> > > +	if (remainder) {
> > > +		mask = BIT(remainder * 8) - 1;
> > > +		if (mask)
> > > +			conf->write_data(conf, *data & mask);
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > >   static int altera_cvp_teardown(struct fpga_manager *mgr,
> > >   			       struct fpga_image_info *info)
> > >   {
> > > @@ -262,39 +297,29 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
> > >   	return 0;
> > >   }
> > > -static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
> > > -{
> > > -	struct altera_cvp_conf *conf = mgr->priv;
> > > -	u32 val;
> > > -
> > > -	/* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
> > > -	altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
> > > -	if (val & VSE_CVP_STATUS_CFG_ERR) {
> > > -		dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
> > > -			bytes);
> > > -		return -EPROTO;
> > > -	}
> > > -	return 0;
> > > -}
> > > -
> > >   static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
> > >   			    size_t count)
> > >   {
> > >   	struct altera_cvp_conf *conf = mgr->priv;
> > > +	size_t done, remaining, len;
> > >   	const u32 *data;
> > > -	size_t done, remaining;
> > >   	int status = 0;
> > > -	u32 mask;
> > >   	/* STEP 9 - write 32-bit data from RBF file to CVP data register */
> > >   	data = (u32 *)buf;
> > >   	remaining = count;
> > >   	done = 0;
> > > -	while (remaining >= 4) {
> > > -		conf->write_data(conf, *data++);
> > > -		done += 4;
> > > -		remaining -= 4;
> > > +	while (remaining) {
> > > +		if (remaining >= sizeof(u32))
> > > +			len = sizeof(u32);
> > > +		else
> > > +			len = remaining;
> > > +
> > > +		altera_cvp_send_block(conf, data, len);
> > > +		data++;
> > > +		done += len;
> > > +		remaining -= len;
> > >   		/*
> > >   		 * STEP 10 (optional) and STEP 11
> > > @@ -312,11 +337,6 @@ static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
> > >   		}
> > >   	}
> > > -	/* write up to 3 trailing bytes, if any */
> > > -	mask = BIT(remaining * 8) - 1;
> > > -	if (mask)
> > > -		conf->write_data(conf, *data & mask);
> > > -
> > >   	if (altera_cvp_chkcfg)
> > >   		status = altera_cvp_chk_error(mgr, count);
> > > -- 
> > > 2.7.4
> > > 
> > Cheers,
> > Moritz
> > 
> 

Moritz