Re: [PATCH 1/6] dt-bindings: irqchip: Add PRUSS interrupt controller bindings

[Rob Herring]

On Sun, 7 Jul 2019 22:52:38 -0500, Suman Anna wrote:
> The Programmable Real-Time Unit Subsystem (PRUSS) contains an interrupt
> controller (INTC) that can handle various system input events and post
> interrupts back to the device-level initiators. The INTC can support
> upto 64 input events on most SoCs with individual control configuration
> and hardware prioritization. These events are mapped onto 10 interrupt
> lines through two levels of many-to-one mapping support. Different
> interrupt lines are routed to the individual PRU cores or to the
> host CPU or to other PRUSS instances.
> 
> The K3 AM65x and J721E SoCs have the next generation of the PRU-ICSS IP,
> commonly called ICSSG. The ICSSG interrupt controller on K3 SoCs provide
> a higher number of host interrupts (20 vs 10) and can handle an increased
> number of input events (160 vs 64) from various SoC interrupt sources.
> 
> Add the bindings document for these interrupt controllers on all the
> applicable SoCs. It covers the OMAP architecture SoCs - AM33xx, AM437x
> and AM57xx; the Keystone 2 architecture based 66AK2G SoC; the Davinci
> architecture based OMAPL138 SoCs, and the K3 architecture based AM65x
> and J721E SoCs.
> 
> Signed-off-by: Suman Anna <s-anna@xxxxxx>
> Signed-off-by: Andrew F. Davis <afd@xxxxxx>
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> ---
> Prior version: https://patchwork.kernel.org/patch/10795771/
> 
>  .../interrupt-controller/ti,pruss-intc.txt    | 92 +++++++++++++++++++
>  1 file changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.txt
> 

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>