Re: [PATCH V2 1/1] can: sja1000: f81601: add Fintek F81601 support

[Saeed Mahameed]

On Wed, 2019-07-24 at 13:19 +0800, Ji-Ze Hong (Peter Hong) wrote:
> Hi,
> 
> Saeed Mahameed æ 2019/7/24 äå 05:38 åé:
> > On Mon, 2019-07-22 at 14:22 +0800, Ji-Ze Hong (Peter Hong) wrote:
> > > This patch add support for Fintek PCIE to 2 CAN controller
> > > support
> > > 
> > > Signed-off-by: Ji-Ze Hong (Peter Hong) <
> > > hpeter+linux_kernel@xxxxxxxxx
> > > ---
> > > Changelog:
> > > v2:
> > > 	1: Fix comment on the spinlock with write access.
> > > 	2: Use ARRAY_SIZE instead of F81601_PCI_MAX_CHAN.
> > > 	3: Check the strap pin outside the loop.
> > > 	4: Fix the cleanup issue in f81601_pci_add_card().
> > > 	5: Remove unused "channels" in struct f81601_pci_card.
> > > 
> > >   drivers/net/can/sja1000/Kconfig  |   8 ++
> > >   drivers/net/can/sja1000/Makefile |   1 +
> > >   drivers/net/can/sja1000/f81601.c | 215
> > > 

[...] 

> > > 
> > > +	/* Detect available channels */
> > > +	for (i = 0; i < count; i++) {
> > > +		dev = alloc_sja1000dev(0);
> > > +		if (!dev) {
> > > +			err = -ENOMEM;
> > > +			goto failure_cleanup;
> > > +		}
> > > +
> > 
> > don't you need to rollback and cleanup/unregister previously
> > allocated
> > devs ?
> > 
> 
> I'll do cleanup when errors jump to failure_cleanup label and do
> f81601_pci_del_card().
> 

Right !, thanks for the clarification.