Re: [PATCH v4 7/8] dt-bindings: arm: sunxi: add binding for Lichee Zero Plus core board

[Maxime Ripard]

On Wed, Jul 24, 2019 at 09:09:01PM +0800, Icenowy Zheng wrote:
> å 2019-07-23 03:29ïMaxime Ripard åéï
> > On Sat, Jul 20, 2019 at 07:39:08PM +0800, Icenowy Zheng wrote:
> > >
> > >
> > > ä 2019å7æ20æ GMT+08:00 äå6:13:18, Maxime Ripard
> > > <maxime.ripard@xxxxxxxxxxx> åå:
> > > >On Sat, Jul 13, 2019 at 11:46:33AM +0800, Icenowy Zheng wrote:
> > > >> The Lichee Zero Plus is a core board made by Sipeed, with a microUSB
> > > >> connector on it, TF slot or WSON8 SD chip, optional eMMC or SPI
> > > >Flash.
> > > >> It has a gold finger connector for expansion, and UART is available
> > > >from
> > > >> reserved pins w/ 2.54mm pitch. The board can use either SoChip S3 or
> > > >> Allwinner V3L SoCs.
> > > >>
> > > >> Add the device tree binding of the basic version of the core board --
> > > >> w/o eMMC or SPI Flash, w/ TF slot or WSON8 SD, and use S3 SoC.
> > > >>
> > > >> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> > > >> ---
> > > >> No changes since v3.
> > > >>
> > > >> Patch introduced in v2.
> > > >>
> > > >>  Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++
> > > >>  1 file changed, 5 insertions(+)
> > > >>
> > > >> diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml
> > > >b/Documentation/devicetree/bindings/arm/sunxi.yaml
> > > >> index 000a00d12d6a..48c126a7a848 100644
> > > >> --- a/Documentation/devicetree/bindings/arm/sunxi.yaml
> > > >> +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
> > > >> @@ -353,6 +353,11 @@ properties:
> > > >>            - const: licheepi,licheepi-zero
> > > >>            - const: allwinner,sun8i-v3s
> > > >>
> > > >> +      - description: Lichee Zero Plus (with S3, without eMMC/SPI
> > > >Flash)
> > > >> +        items:
> > > >> +          - const: sipeed,lichee-zero-plus
> > > >> +          - const: allwinner,sun8i-s3
> > > >
> > > >If the S3 is just a rebranded V3, then we should have the v3 compatile
> > > >in that list too.
> > >
> > > S3 is V3 with copackaged DDR3 DRAM.
> > >
> > > It's pin incompatible w/ V3.
> >
> > Does it matter though?
> >
> > If the only thing that changes is the package, we're not manipulating
> > that, and any software that deals with the v3 can deal with the
> > s3. Which is what the compatible is about.
>
> Okay. Should the S3 compatible be kept befoer the V3 one?

Yep, something like (in the DT)

compatible = "sipeed,lichee-zero-plus", "allwinner,sun8i-s3", "allwinner,sun8i-v3"

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com