[PATCH 09/15] arm64: dts: msm8996: thermal: Add interrupt support

[Amit Kucheria]

Register upper-lower interrupts for each of the two tsens controllers.

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 60 ++++++++++++++-------------
 1 file changed, 32 insertions(+), 28 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 96c0a481f454..7325eba42d19 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -175,8 +175,8 @@
 
 	thermal-zones {
 		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -196,8 +196,8 @@
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -217,8 +217,8 @@
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -238,8 +238,8 @@
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -259,8 +259,8 @@
 		};
 
 		gpu-thermal-top {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -274,8 +274,8 @@
 		};
 
 		gpu-thermal-bottom {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -289,8 +289,8 @@
 		};
 
 		m4m-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -304,8 +304,8 @@
 		};
 
 		l3-or-venus-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -319,8 +319,8 @@
 		};
 
 		cluster0-l2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -334,8 +334,8 @@
 		};
 
 		cluster1-l2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -349,8 +349,8 @@
 		};
 
 		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -364,8 +364,8 @@
 		};
 
 		q6-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -379,8 +379,8 @@
 		};
 
 		mem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -394,8 +394,8 @@
 		};
 
 		modemtx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -591,6 +591,8 @@
 			reg = <0x4a9000 0x1000>, /* TM */
 			      <0x4a8000 0x1000>; /* SROT */
 			#qcom,sensors = <13>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tsens0";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -599,6 +601,8 @@
 			reg = <0x4ad000 0x1000>, /* TM */
 			      <0x4ac000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tsens1";
 			#thermal-sensor-cells = <1>;
 		};
 
-- 
2.17.1