Re: [PATCH] riscv: kbuild: add virtual memory system selection

From: Bin Meng
Date: Thu Aug 01 2019 - 04:56:27 EST


On Thu, Aug 1, 2019 at 3:37 AM Paul Walmsley <paul.walmsley@xxxxxxxxxx> wrote:
>
> On Sun, 28 Jul 2019, Bin Meng wrote:
>
> > The spec does not mention 40-bit physical addresses, but 56-bit.
>
> Thanks, agreed. Updated patch below
>
>
> - Paul
>
> From: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
> Date: Fri, 26 Jul 2019 10:21:11 -0700
> Subject: [PATCH v2] riscv: kbuild: add virtual memory system selection
>
> The RISC-V specifications currently define three virtual memory
> translation systems: Sv32, Sv39, and Sv48. Sv32 is currently specific
> to 32-bit systems; Sv39 and Sv48 are currently specific to 64-bit
> systems. The current kernel only supports Sv32 and Sv39, but we'd
> like to start preparing for Sv48. As an initial step, allow the
> virtual memory translation system to be selected via kbuild, and stop
> the build if an option is selected that the kernel doen't currently
> support.
>
> This second version of the patch fixes some errors in the Kconfig
> description text, found by Bin Meng <bmeng.cn@xxxxxxxxx>.
>
> This patch currently has no functional impact.
>
> Signed-off-by: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
> Cc: Alexandre Ghiti <alex@xxxxxxxx>
> Cc: Bin Meng <bmeng.cn@xxxxxxxxx>
> ---
> arch/riscv/Kconfig | 43 +++++++++++++++++++++++++++++
> arch/riscv/include/asm/pgtable-32.h | 4 +++
> arch/riscv/include/asm/pgtable-64.h | 4 +++
> 3 files changed, 51 insertions(+)
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 59a4727ecd6c..f5e76e25a91e 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -155,6 +155,49 @@ config MODULE_SECTIONS
> bool
> select HAVE_MOD_ARCH_SPECIFIC
>
> +choice
> + prompt "Virtual Memory System"
> + default RISCV_VM_SV32 if 32BIT
> + default RISCV_VM_SV39 if 64BIT
> + help
> + The RISC-V Instruction Set Manual Volume II: Privileged
> + Architecture defines several different "virtual memory
> + systems" which specify virtual and physical address formats
> + and the structure of page table entries. This determines
> + the amount of virtual address space present and how it is
> + translated into physical addresses.
> +
> + config RISCV_VM_SV32
> + depends on 32BIT
> + bool "RISC-V Sv32"
> + help
> + The Sv32 virtual memory system is a page-based
> + address and page table format for RV32 systems.
> + It specifies a translation between 32-bit virtual
> + addresses and 33-bit physical addresses, via a
> + two-stage page table layout.
> + config RISCV_VM_SV39
> + depends on 64BIT
> + bool "RISC-V Sv39"
> + help
> + The Sv39 virtual memory system is a page-based
> + address and page table format for RV64 systems.
> + It specifies a translation between 39-bit virtual
> + addresses and 56-bit physical addresses, via a
> + three-stage page table layout.
> + config RISCV_VM_SV48
> + depends on 64BIT
> + bool "RISC-V Sv48"
> + help
> + The Sv48 virtual memory system is a page-based
> + address and page table format for RV64 systems.
> + It specifies a translation between 48-bit virtual
> + addresses and 56-bit physical addresses, via a
> + four-stage page table layout.
> +
> +endchoice
> +
> +
> choice
> prompt "Maximum Physical Memory"
> default MAXPHYSMEM_2GB if 32BIT
> diff --git a/arch/riscv/include/asm/pgtable-32.h b/arch/riscv/include/asm/pgtable-32.h
> index b0ab66e5fdb1..86d41a04735b 100644
> --- a/arch/riscv/include/asm/pgtable-32.h
> +++ b/arch/riscv/include/asm/pgtable-32.h
> @@ -6,6 +6,10 @@
> #ifndef _ASM_RISCV_PGTABLE_32_H
> #define _ASM_RISCV_PGTABLE_32_H
>
> +#if !defined(CONFIG_RISCV_VM_SV32)
> +#error Only Sv32 supported
> +#endif
> +
> #include <asm-generic/pgtable-nopmd.h>
> #include <linux/const.h>
>
> diff --git a/arch/riscv/include/asm/pgtable-64.h b/arch/riscv/include/asm/pgtable-64.h
> index 74630989006d..86935595115d 100644
> --- a/arch/riscv/include/asm/pgtable-64.h
> +++ b/arch/riscv/include/asm/pgtable-64.h
> @@ -6,6 +6,10 @@
> #ifndef _ASM_RISCV_PGTABLE_64_H
> #define _ASM_RISCV_PGTABLE_64_H
>
> +#if !defined(CONFIG_RISCV_VM_SV39)
> +#error Only Sv39 supported for now
> +#endif
> +
> #include <linux/const.h>
>
> #define PGDIR_SHIFT 30
> --

Reviewed-by: Bin Meng <bmeng.cn@xxxxxxxxx>