Re: [PATCH/RFC 01/12] dt-bindings: display: renesas: lvds: RZ/G2E needs renesas,companion too

[Laurent Pinchart]

Hello Fabrizio,

Thank you for the patch.

On Fri, Aug 02, 2019 at 08:33:58AM +0100, Fabrizio Castro wrote:
> Document RZ/G2E support for property renesas,companion.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

and taken in my tree.

> ---
>  Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> index c6a196d..dece79e 100644
> --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> @@ -49,9 +49,9 @@ Each port shall have a single endpoint.
>  Optional properties:
>  
>  - renesas,companion : phandle to the companion LVDS encoder. This property is
> -  mandatory for the first LVDS encoder on D3 and E3 SoCs, and shall point to
> -  the second encoder to be used as a companion in dual-link mode. It shall not
> -  be set for any other LVDS encoder.
> +  mandatory for the first LVDS encoder on R-Car D3, R-Car E3, and RZ/G2E SoCs,
> +  and shall point to the second encoder to be used as a companion in dual-link
> +  mode. It shall not be set for any other LVDS encoder.
>  
>  
>  Example:

-- 
Regards,

Laurent Pinchart