Re: [PATCH] ARM: dts: stm32: add DFSDM pins to stm32mp157c

[Olivier MOYSAN]

Hi ALex,

On 8/2/19 10:09 AM, Alexandre Torgue wrote:
> Hi Olivier
> 
> On 8/1/19 9:46 AM, Olivier Moysan wrote:
>> Add DFSDM pins to stm32mp157c.
>>
>> Signed-off-by: Olivier Moysan <olivier.moysan@xxxxxx>
>> ---
>>    arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 39 +++++++++++++++++++++++++++++++
>>    1 file changed, 39 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
>> index 9eaec9bf8cb8..f96a928cbc49 100644
>> --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
>> +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
>> @@ -230,6 +230,45 @@
>>    				};
>>    			};
>>    
> 
> I use to only take pinconfig which are used in board. So please resend
> with the "board patch".
> 

The DFSDM is one of the interface used in the STM32MP15 soundcard.
This soundcard also uses the Wolfson wm8994 audio codec.
The wm8994 codec driver requires adaptations, and the upstream of
these changes is not planned today.
So, the related board patches cannot be sent.

BRs
Olivier

> regards
> Alex
> 
> 
>> +			dfsdm_clkout_pins_a: dfsdm-clkout-pins-0 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('B', 13, AF3)>; /* DFSDM_CKOUT */
>> +					bias-disable;
>> +					drive-push-pull;
>> +					slew-rate = <0>;
>> +				};
>> +			};
>> +
>> +			dfsdm_clkout_sleep_pins_a: dfsdm-clkout-sleep-pins-0 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('B', 13, ANALOG)>; /* DFSDM_CKOUT */
>> +				};
>> +			};
>> +
>> +			dfsdm_data1_pins_a: dfsdm-data1-pins-0 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('C', 3, AF3)>; /* DFSDM_DATA1 */
>> +				};
>> +			};
>> +
>> +			dfsdm_data1_sleep_pins_a: dfsdm-data1-sleep-pins-0 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('C', 3, ANALOG)>; /* DFSDM_DATA1 */
>> +				};
>> +			};
>> +
>> +			dfsdm_data3_pins_a: dfsdm-data3-pins-0 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('F', 13, AF6)>; /* DFSDM_DATA3 */
>> +				};
>> +			};
>> +
>> +			dfsdm_data3_sleep_pins_a: dfsdm-data3-sleep-pins-0 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('F', 13, ANALOG)>; /* DFSDM_DATA3 */
>> +				};
>> +			};
>> +
>>    			ethernet0_rgmii_pins_a: rgmii-0 {
>>    				pins1 {
>>    					pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
>>