Re: [PATCH v3 00/19] KVM RISC-V Support
From: Atish Patra
Date: Mon Aug 05 2019 - 18:28:50 EST
On Mon, 2019-08-05 at 18:05 +0200, Paolo Bonzini wrote:
> On 05/08/19 15:42, Anup Patel wrote:
> > This series adds initial KVM RISC-V support. Currently, we are able
> > to boot
> > RISC-V 64bit Linux Guests with multiple VCPUs.
> >
> > Few key aspects of KVM RISC-V added by this series are:
> > 1. Minimal possible KVM world-switch which touches only GPRs and
> > few CSRs.
> > 2. Full Guest/VM switch is done via vcpu_get/vcpu_put
> > infrastructure.
> > 3. KVM ONE_REG interface for VCPU register access from user-space.
> > 4. PLIC emulation is done in user-space. In-kernel PLIC emulation,
> > will
> > be added in future.
> > 5. Timer and IPI emuation is done in-kernel.
> > 6. MMU notifiers supported.
> > 7. FP lazy save/restore supported.
> > 8. SBI v0.1 emulation for KVM Guest available.
> >
> > Here's a brief TODO list which we will work upon after this series:
> > 1. Handle trap from unpriv access in reading Guest instruction
> > 2. Handle trap from unpriv access in SBI v0.1 emulation
> > 3. Implement recursive stage2 page table programing
> > 4. SBI v0.2 emulation in-kernel
> > 5. SBI v0.2 hart hotplug emulation in-kernel
> > 6. In-kernel PLIC emulation
> > 7. ..... and more .....
> >
> > This series is based upon KVM pre-patches sent by Atish earlier
> > (https://lkml.org/lkml/2019/8/3/3) and it can be found in
> > riscv_kvm_v3 branch at:
> > https//github.com/avpatel/linux.git
> >
> > Our work-in-progress KVMTOOL RISC-V port can be found in riscv_v1
> > branch at:
> > https//github.com/avpatel/kvmtool.git
> >
> > We need OpenSBI with RISC-V hypervisor extension support which can
> > be
> > found in hyp_ext_changes_v1 branch at:
> > https://github.com/riscv/opensbi.git
> >
> > The QEMU RISC-V hypervisor emulation is done by Alistair and is
> > available
> > in riscv-hyp-work.next branch at:
> > https://github.com/alistair23/qemu.git
> >
> > To play around with KVM RISC-V, here are few reference commands:
> > 1) To cross-compile KVMTOOL:
> > $ make lkvm-static
> > 2) To launch RISC-V Host Linux:
> > $ qemu-system-riscv64 -monitor null -cpu rv64,h=true -M virt \
> > -m 512M -display none -serial mon:stdio \
> > -kernel opensbi/build/platform/qemu/virt/firmware/fw_jump.elf \
> > -device loader,file=build-
> > riscv64/arch/riscv/boot/Image,addr=0x80200000 \
> > -initrd ./rootfs_kvm_riscv64.img \
> > -append "root=/dev/ram rw console=ttyS0 earlycon=sbi"
> > 3) To launch RISC-V Guest Linux with 9P rootfs:
> > $ ./apps/lkvm-static run -m 128 -c2 --console serial \
> > -p "console=ttyS0 earlycon=uart8250,mmio,0x3f8" -k ./apps/Image
> > --debug
> > 4) To launch RISC-V Guest Linux with initrd:
> > $ ./apps/lkvm-static run -m 128 -c2 --console serial \
> > -p "console=ttyS0 earlycon=uart8250,mmio,0x3f8" -k ./apps/Image
> > \
> > -i ./apps/rootfs.img --debug
> >
> > Changes since v2:
> > - Removed references of KVM_REQ_IRQ_PENDING from all patches
> > - Use kvm->srcu within in-kernel KVM run loop
> > - Added percpu vsip_shadow to track last value programmed in VSIP
> > CSR
> > - Added comments about irqs_pending and irqs_pending_mask
> > - Used kvm_arch_vcpu_runnable() in-place-of
> > kvm_riscv_vcpu_has_interrupt()
> > in system_opcode_insn()
> > - Removed unwanted smp_wmb() in kvm_riscv_stage2_vmid_update()
> > - Use kvm_flush_remote_tlbs() in kvm_riscv_stage2_vmid_update()
> > - Use READ_ONCE() in kvm_riscv_stage2_update_hgatp() for vmid
> >
> > Changes since v1:
> > - Fixed compile errors in building KVM RISC-V as module
> > - Removed unused kvm_riscv_halt_guest() and
> > kvm_riscv_resume_guest()
> > - Set KVM_CAP_SYNC_MMU capability only after MMU notifiers are
> > implemented
> > - Made vmid_version as unsigned long instead of atomic
> > - Renamed KVM_REQ_UPDATE_PGTBL to KVM_REQ_UPDATE_HGATP
> > - Renamed kvm_riscv_stage2_update_pgtbl() to
> > kvm_riscv_stage2_update_hgatp()
> > - Configure HIDELEG and HEDELEG in kvm_arch_hardware_enable()
> > - Updated ONE_REG interface for CSR access to user-space
> > - Removed irqs_pending_lock and use atomic bitops instead
> > - Added separate patch for FP ONE_REG interface
> > - Added separate patch for updating MAINTAINERS file
>
> Down to one comment, which can be addressed when applying (though I'd
> prefer if you tested the one-token fix).
>
> Palmer, Albert, can you give your Acked-by, especially for patches
> 2-3-18-19?
>
We also need following pre-equisite patches to be reviewed and kvm
series should be merged on top of it.
https://patchwork.kernel.org/project/linux-riscv/list/?series=154889
At least we need 1 & 2 from above series for kvm series to work.
Regards,
Atish
> Thanks,
>
> Paolo
>
> > Anup Patel (14):
> > KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface
> > RISC-V: Add hypervisor extension related CSR defines
> > RISC-V: Add initial skeletal KVM support
> > RISC-V: KVM: Implement VCPU create, init and destroy functions
> > RISC-V: KVM: Implement VCPU interrupts and requests handling
> > RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls
> > RISC-V: KVM: Implement VCPU world-switch
> > RISC-V: KVM: Handle MMIO exits for VCPU
> > RISC-V: KVM: Handle WFI exits for VCPU
> > RISC-V: KVM: Implement VMID allocator
> > RISC-V: KVM: Implement stage2 page table programming
> > RISC-V: KVM: Implement MMU notifiers
> > RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig
> > RISC-V: KVM: Add MAINTAINERS entry
> >
> > Atish Patra (5):
> > RISC-V: Export few kernel symbols
> > RISC-V: KVM: Add timer functionality
> > RISC-V: KVM: FP lazy save/restore
> > RISC-V: KVM: Implement ONE REG interface for FP registers
> > RISC-V: KVM: Add SBI v0.1 support
> >
> > MAINTAINERS | 10 +
> > arch/riscv/Kconfig | 2 +
> > arch/riscv/Makefile | 2 +
> > arch/riscv/configs/defconfig | 13 +
> > arch/riscv/configs/rv32_defconfig | 13 +
> > arch/riscv/include/asm/csr.h | 58 ++
> > arch/riscv/include/asm/kvm_host.h | 243 ++++++
> > arch/riscv/include/asm/kvm_vcpu_timer.h | 32 +
> > arch/riscv/include/asm/pgtable-bits.h | 1 +
> > arch/riscv/include/uapi/asm/kvm.h | 98 +++
> > arch/riscv/kernel/asm-offsets.c | 148 ++++
> > arch/riscv/kernel/smp.c | 2 +-
> > arch/riscv/kernel/time.c | 1 +
> > arch/riscv/kvm/Kconfig | 34 +
> > arch/riscv/kvm/Makefile | 14 +
> > arch/riscv/kvm/main.c | 86 +++
> > arch/riscv/kvm/mmu.c | 905
> > ++++++++++++++++++++++
> > arch/riscv/kvm/tlb.S | 43 ++
> > arch/riscv/kvm/vcpu.c | 969
> > ++++++++++++++++++++++++
> > arch/riscv/kvm/vcpu_exit.c | 556 ++++++++++++++
> > arch/riscv/kvm/vcpu_sbi.c | 119 +++
> > arch/riscv/kvm/vcpu_switch.S | 368 +++++++++
> > arch/riscv/kvm/vcpu_timer.c | 106 +++
> > arch/riscv/kvm/vm.c | 86 +++
> > arch/riscv/kvm/vmid.c | 111 +++
> > drivers/clocksource/timer-riscv.c | 8 +
> > include/clocksource/timer-riscv.h | 16 +
> > include/uapi/linux/kvm.h | 1 +
> > 28 files changed, 4044 insertions(+), 1 deletion(-)
> > create mode 100644 arch/riscv/include/asm/kvm_host.h
> > create mode 100644 arch/riscv/include/asm/kvm_vcpu_timer.h
> > create mode 100644 arch/riscv/include/uapi/asm/kvm.h
> > create mode 100644 arch/riscv/kvm/Kconfig
> > create mode 100644 arch/riscv/kvm/Makefile
> > create mode 100644 arch/riscv/kvm/main.c
> > create mode 100644 arch/riscv/kvm/mmu.c
> > create mode 100644 arch/riscv/kvm/tlb.S
> > create mode 100644 arch/riscv/kvm/vcpu.c
> > create mode 100644 arch/riscv/kvm/vcpu_exit.c
> > create mode 100644 arch/riscv/kvm/vcpu_sbi.c
> > create mode 100644 arch/riscv/kvm/vcpu_switch.S
> > create mode 100644 arch/riscv/kvm/vcpu_timer.c
> > create mode 100644 arch/riscv/kvm/vm.c
> > create mode 100644 arch/riscv/kvm/vmid.c
> > create mode 100644 include/clocksource/timer-riscv.h
> >
> > --
> > 2.17.1
> >