[PATCH v3 00/21] Common patches from downstream development

From: Philippe Schenker
Date: Wed Aug 07 2019 - 04:26:16 EST



This patchset holds some common changes that were never upstreamed.
With latest downstream kernel upgrade, I took the aproach to select
mainline devicetrees and atomically add missing stuff for downstream.

These patches I send here are separated out with changes that also
have a benfit for mainline.

Philippe

Changes in v3:
- Add new commit message from Stefan's proposal on ML
- Fix commit message
- Fix commit title to "...imx6-apalis:..."
- New patch to make use of ARM: dts: imx7-colibri: fix 1.8V/UHS support

Changes in v2:
- Deleted touchrevolution downstream stuff
- Use generic node name
- Better comment
- Changed commit title to '...imx6qdl-apalis:...'
- Deleted touchrevolution downstream stuff
- Use generic node name
- Put a better comment in there
- Commit title
- Removed f0710a, that is downstream only
- Changed to generic node name
- Better comment

Marcel Ziswiler (1):
ARM: dts: imx7-colibri: make sure module supplies are always on

Max Krummenacher (2):
ARM: dts: imx6ull-colibri: reduce v_batt current in power off
ARM: dts: imx6ull: improve can templates

Oleksandr Suvorov (1):
ARM: dts: add recovery for I2C for iMX7

Philippe Schenker (14):
ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
ARM: dts: imx7-colibri: Add sleep mode to ethernet
ARM: dts: imx7-colibri: Add touch controllers
ARM: dts: imx6qdl-colibri: add phy to fec
ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc
ARM: dts: imx6qdl-apalis: Add sleep state to can interfaces
ARM: dts: imx6-apalis: Add touchscreens used on Toradex eval boards
ARM: dts: imx6-colibri: Add missing pinmuxing to Toradex eval board
ARM: dts: imx6ull-colibri: Add sleep mode to fec
ARM: dts: imx6ull-colibri: Add watchdog
ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri
ARM: dts: imx6/7-colibri: switch dr_mode to otg
ARM: dts: imx6ull-colibri: Add touchscreen used with Eval Board
ARM: dts: imx7-colibri: Add UHS support to eval board

Stefan Agner (3):
ARM: dts: imx7-colibri: disable HS400
ARM: dts: imx7-colibri: add GPIO wakeup key
ARM: dts: imx7-colibri: fix 1.8V/UHS support

arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 39 ++++++
arch/arm/boot/dts/imx6q-apalis-eval.dts | 13 ++
arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts | 13 ++
arch/arm/boot/dts/imx6q-apalis-ixora.dts | 13 ++
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 27 ++++-
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 27 ++++-
.../arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 50 ++++++++
.../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi | 2 +-
arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 2 +-
arch/arm/boot/dts/imx6ull-colibri.dtsi | 52 +++++++-
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 49 +++++++-
arch/arm/boot/dts/imx7-colibri.dtsi | 114 ++++++++++++++++--
12 files changed, 373 insertions(+), 28 deletions(-)

--
2.22.0