Re: [PATCH V5 1/3] mmc: sdhci: Fix O2 Host data read/write DLL Lock Phase shift issue

[Adrian Hunter]

On 8/08/19 12:09 AM, Shirley Her (SC) wrote:
> Fix data read/write error in HS200 mode due to chip DLL lock phase shift

Please change the patch subject and commit message to match what the patch
actually does.

> 
> Signed-off-by:Shirley Her <shirley.her@xxxxxxxxxxxxxx>
> ---
> change in V5:
>  1. split 2 patches into 3 patches
>  2. make dll_adjust_count start from 0
>  3. fix ret overwritten issue
>  4. use break instead of goto
> 
> change in V4:
>  1. add a bug fix for V3
> 
> change in V3:
>  1. add more explanation in dll_recovery and execute_tuning function
>  2. move dll_adjust_count to O2_host struct
>  3. fix some coding style error
>  4. renaming O2_PLL_WDT_CONTROL1 TO O2_PLL_DLL_WDT_CONTROL1
> 
> change in V2:
>  1. use usleep_range instead of udelay
>  2. move dll_adjust_count to sdhci-pci-o2micro.c
> 
> chagne in V1:
>  1. add error recovery function to relock DLL with correct phase
>  2. retuning HS200 after DLL locked
> ---
>  drivers/mmc/host/sdhci-pci-o2micro.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
> index 9dc4548..b3a33d9 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -51,7 +51,7 @@
>  #define O2_SD_VENDOR_SETTING2	0x1C8
>  #define O2_SD_HW_TUNING_DISABLE	BIT(4)
>  
> -#define O2_PLL_WDT_CONTROL1	0x1CC
> +#define O2_PLL_DLL_WDT_CONTROL1	0x1CC
>  #define  O2_PLL_FORCE_ACTIVE	BIT(18)
>  #define  O2_PLL_LOCK_STATUS	BIT(14)
>  #define  O2_PLL_SOFT_RESET	BIT(12)
> @@ -316,23 +316,23 @@ static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
>  	u32 scratch32;
>  
>  	/* PLL software reset */
> -	scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
> +	scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
>  	scratch32 |= O2_PLL_SOFT_RESET;
> -	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> +	sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
>  	udelay(1);
>  	scratch32 &= ~(O2_PLL_SOFT_RESET);
> -	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> +	sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
>  
>  	/* PLL force active */
>  	scratch32 |= O2_PLL_FORCE_ACTIVE;
> -	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> +	sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
>  
>  	/* Wait max 20 ms */
>  	timeout = ktime_add_ms(ktime_get(), 20);
>  	while (1) {
>  		bool timedout = ktime_after(ktime_get(), timeout);
>  
> -		scratch = sdhci_readw(host, O2_PLL_WDT_CONTROL1);
> +		scratch = sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1);
>  		if (scratch & O2_PLL_LOCK_STATUS)
>  			break;
>  		if (timedout) {
> @@ -350,9 +350,9 @@ static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
>  
>  out:
>  	/* Cancel PLL force active */
> -	scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
> +	scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
>  	scratch32 &= ~O2_PLL_FORCE_ACTIVE;
> -	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
> +	sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
>  }
>  
>  static int sdhci_o2_get_cd(struct mmc_host *mmc)
>