Re: [PATCH v2 2/2 RESEND] usb: dwc3: remove generic PHY calibrate() calls

[Marek Szyprowski]

Hi Felipe,

On 2019-08-08 11:51, Felipe Balbi wrote:
> Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> writes:
>> Calls to USB2 generic PHY calibrate() method has been moved to HCD core,
>> which now successfully handles generic PHYs and their calibration after
>> every HCD reset. This fixes all the timing issues related to PHY
>> calibration done directly from DWC3 driver: incorrect operation after
>> system suspend/resume or USB3.0 detection failure when XHCI-plat driver
>> compiled as separate module.
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
>> Tested-by: Anand Moon <linux.amoon@xxxxxxxxx>
>> Tested-by: Jochen Sprickerhof <jochen@xxxxxxxxxxxxxx>
>> ---
>>   drivers/usb/dwc3/core.c | 2 --
>>   1 file changed, 2 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index c9bb93a2c81e..7dd6d419254d 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -168,7 +168,6 @@ static void __dwc3_set_mode(struct work_struct *work)
>>   				otg_set_vbus(dwc->usb2_phy->otg, true);
>>   			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
>>   			phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
>> -			phy_calibrate(dwc->usb2_generic_phy);
> are you sure you're the only one using phy_calibrate()? I don't want any
> regressions because of this :-p

Yes I've checked. In case of USB PHYs, the .calibrate method is only 
implemented by Exynos DRDUSB3 PHY driver:

# git grep \\\.calibrate drivers/phy
drivers/phy/broadcom/phy-brcm-sata.c:ÂÂ .calibrateÂÂÂÂÂ = 
brcm_sata_phy_calibrate,
drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c: .calibrateÂÂÂÂÂÂÂÂÂÂÂÂÂ = 
ufs_qcom_phy_qmp_14nm_phy_calibrate,
drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c: .calibrateÂÂÂÂÂÂÂÂÂÂÂÂÂ = 
ufs_qcom_phy_qmp_20nm_phy_calibrate,
drivers/phy/samsung/phy-exynos5-usbdrd.c:ÂÂÂÂÂÂ .calibrateÂÂÂÂÂ = 
exynos5_usbdrd_phy_calibrate,

(the other PHY drivers are for SATA or UFS).

To avoid the regression on Exynos it is enough to apply the 2 patches 
from this patchset together.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland