[PATCH] regulator: qcom-rpmh: Add support for SM8150

From: Vinod Koul
Date: Thu Aug 08 2019 - 05:33:43 EST

Next message: Vinod Koul: "[PATCH 1/2] regulator: dt-bindings: Add PM8150x compatibles"
Previous message: Vinod Koul: "[PATCH] regulator: dt-bindings: Add PM8150x compatibles"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Add support from RPMH regulators found in SM8150 platform

Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20190808093343.5600-2-vkoul@xxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
drivers/regulator/qcom-rpmh-regulator.c | 147 ++++++++++++++++++++++++
1 file changed, 147 insertions(+)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index b2c2d01d1637..693ffec62f3e 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -637,6 +637,72 @@ static const struct rpmh_vreg_hw_data pmic4_lvs = {
/* LVS hardware does not support voltage or mode configuration. */
};

+static const struct rpmh_vreg_hw_data pmic5_pldo = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 255, 8000),
+ .n_voltages = 256,
+ .hpm_min_load_uA = 10000,
+ .pmic_mode_map = pmic_mode_map_pmic4_ldo,
+ .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_pldo_lv = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 62, 8000),
+ .n_voltages = 63,
+ .hpm_min_load_uA = 10000,
+ .pmic_mode_map = pmic_mode_map_pmic4_ldo,
+ .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_nldo = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 123, 8000),
+ .n_voltages = 124,
+ .hpm_min_load_uA = 30000,
+ .pmic_mode_map = pmic_mode_map_pmic4_ldo,
+ .of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_hfsmps510 = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
+ .n_voltages = 216,
+ .pmic_mode_map = pmic_mode_map_pmic4_smps,
+ .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_ftsmps510 = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 263, 4000),
+ .n_voltages = 264,
+ .pmic_mode_map = pmic_mode_map_pmic4_smps,
+ .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 1600),
+ .n_voltages = 5,
+ .pmic_mode_map = pmic_mode_map_pmic4_smps,
+ .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_bob = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_bypass_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 135, 32000),
+ .n_voltages = 135,
+ .pmic_mode_map = pmic_mode_map_pmic4_bob,
+ .of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
+};
+
#define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \
{ \
.name = _name, \
@@ -705,6 +771,75 @@ static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
{},
};

+static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic5_hfsmps510, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic5_hfsmps510, "vdd-s5"),
+ RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"),
+ RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"),
+ RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps510, "vdd-s8"),
+ RPMH_VREG("smps9", "smp%s9", &pmic5_ftsmps510, "vdd-s9"),
+ RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l8-l11"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l10"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6-l9"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7-l12-l14-l15"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l1-l8-l11"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l6-l9"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l2-l10"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_nldo, "vdd-l1-l8-l11"),
+ RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo_lv, "vdd-l7-l12-l14-l15"),
+ RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l13-l6-l17"),
+ RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo_lv, "vdd-l7-l12-l14-l15"),
+ RPMH_VREG("ldo15", "ldo%s15", &pmic5_pldo_lv, "vdd-l7-l12-l14-l15"),
+ RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l13-l6-l17"),
+ RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l13-l6-l17"),
+ RPMH_VREG("ldo18", "ldo%s18", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
+ {},
+};
+
+static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps510, "vdd-s5"),
+ RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"),
+ RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"),
+ RPMH_VREG("smps8", "smp%s8", &pmic5_hfsmps510, "vdd-s8"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo_lv, "vdd-l1-l8"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2-l3"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l2-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l4-l5-l6"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l4-l5-l6"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l4-l5-l6"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7-l11"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l1-l8-l11"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l9-l10"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l9-l10"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l7-l11"),
+ RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"),
+ {},
+};
+
+static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps515, "vdd-s2"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"),
+ RPMH_VREG("ldo7", "ldo%s6", &pmic5_pldo_lv, "vdd-l7"),
+ {},
+};
+
static int rpmh_regulator_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -755,6 +890,18 @@ static const struct of_device_id rpmh_regulator_match_table[] = {
.compatible = "qcom,pm8005-rpmh-regulators",
.data = pm8005_vreg_data,
},
+ {
+ .compatible = "qcom,pm8150-rpmh-regulators",
+ .data = pm8150_vreg_data,
+ },
+ {
+ .compatible = "qcom,pm8150l-rpmh-regulators",
+ .data = pm8150l_vreg_data,
+ },
+ {
+ .compatible = "qcom,pm8009-rpmh-regulators",
+ .data = pm8009_vreg_data,
+ },
{}
};
MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
--
2.20.1

Next message: Vinod Koul: "[PATCH 1/2] regulator: dt-bindings: Add PM8150x compatibles"
Previous message: Vinod Koul: "[PATCH] regulator: dt-bindings: Add PM8150x compatibles"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]