[PATCH v4 0/9] Use MFD framework for SGI IOC3 drivers

[Thomas Bogendoerfer]

SGI IOC3 ASIC includes support for ethernet, PS2 keyboard/mouse,
NIC (number in a can), GPIO and a byte  bus. By attaching a
SuperIO chip to it, it also supports serial lines and a parallel
port. The chip is used on a variety of SGI systems with different
configurations. This patchset moves code out of the network driver,
which doesn't belong there, into its new place a MFD driver and
specific platform drivers for the different subfunctions.

Changes in v4:
 - added w1 drivers to the series after merge in 5.3 failed because
   of no response from maintainer and other parts of this series
   won't work without that drivers
 - moved ip30 systemboard support to the ip30 series, which will
   deal with rtc oddity Lee found
 - converted to use devm_platform_ioremap_resource
 - use PLATFORM_DEVID_AUTO for serial, ethernet and serio in mfd driver
 - fixed reverse christmas order in ioc3-eth.c
 - formating issue found by Lee
 - re-worked irq request/free in serio driver to avoid crashes during
   probe/remove

Changes in v3:
 - use 1-wire subsystem for handling proms
 - pci-xtalk driver uses prom information to create PCI subsystem
   ids for use in MFD driver
 - changed MFD driver to only use static declared mfd_cells
 - added IP30 system board setup to MFD driver
 - mac address is now read from ioc3-eth driver with nvmem framework

Changes in v2:
 - fixed issue in ioc3kbd.c reported by Dmitry Torokhov
 - merged IP27 RTC removal and 8250 serial driver addition into
   main MFD patch to keep patches bisectable

Thomas Bogendoerfer (9):
  w1: add 1-wire master driver for IP block found in SGI ASICs
  w1: add DS2501, DS2502, DS2505 EPROM device driver
  nvmem: core: add nvmem_device_find
  MIPS: PCI: refactor ioc3 special handling
  MIPS: PCI: use information from 1-wire PROM for IOC3 detection
  MIPS: SGI-IP27: remove ioc3 ethernet init
  mfd: ioc3: Add driver for SGI IOC3 chip
  MIPS: SGI-IP27: fix readb/writeb addressing
  Input: add IOC3 serio driver

 arch/mips/include/asm/mach-ip27/mangle-port.h |    4 +-
 arch/mips/include/asm/pci/bridge.h            |    1 +
 arch/mips/include/asm/sn/ioc3.h               |  356 ++---
 arch/mips/pci/pci-xtalk-bridge.c              |  296 ++--
 arch/mips/sgi-ip27/ip27-console.c             |    5 +-
 arch/mips/sgi-ip27/ip27-init.c                |   13 -
 arch/mips/sgi-ip27/ip27-timer.c               |   20 -
 arch/mips/sgi-ip27/ip27-xtalk.c               |   38 +-
 drivers/input/serio/Kconfig                   |   10 +
 drivers/input/serio/Makefile                  |    1 +
 drivers/input/serio/ioc3kbd.c                 |  163 +++
 drivers/mfd/Kconfig                           |   13 +
 drivers/mfd/Makefile                          |    1 +
 drivers/mfd/ioc3.c                            |  586 ++++++++
 drivers/net/ethernet/sgi/Kconfig              |    4 +-
 drivers/net/ethernet/sgi/ioc3-eth.c           | 1936 ++++++++++---------------
 drivers/nvmem/core.c                          |   62 +-
 drivers/rtc/rtc-m48t35.c                      |   11 +
 drivers/tty/serial/8250/8250_ioc3.c           |   98 ++
 drivers/tty/serial/8250/Kconfig               |   11 +
 drivers/tty/serial/8250/Makefile              |    1 +
 drivers/w1/masters/Kconfig                    |    9 +
 drivers/w1/masters/Makefile                   |    1 +
 drivers/w1/masters/sgi_w1.c                   |  130 ++
 drivers/w1/slaves/Kconfig                     |    6 +
 drivers/w1/slaves/Makefile                    |    1 +
 drivers/w1/slaves/w1_ds250x.c                 |  293 ++++
 include/linux/nvmem-consumer.h                |    9 +
 include/linux/platform_data/sgi-w1.h          |   15 +
 include/linux/w1.h                            |    2 +
 30 files changed, 2522 insertions(+), 1574 deletions(-)
 create mode 100644 drivers/input/serio/ioc3kbd.c
 create mode 100644 drivers/mfd/ioc3.c
 create mode 100644 drivers/tty/serial/8250/8250_ioc3.c
 create mode 100644 drivers/w1/masters/sgi_w1.c
 create mode 100644 drivers/w1/slaves/w1_ds250x.c
 create mode 100644 include/linux/platform_data/sgi-w1.h

-- 
2.13.7