[PATCH] EDAC, pnd2: Fix ioremap() size in dnv_rd_reg()

[Stephen Douthit]

Depending on how BIOS has marked the reserved region containing the 32KB
MCHBAR you can get warnings like:

resource sanity check: requesting [mem 0xfed10000-0xfed1ffff], which spans more than reserved [mem 0xfed10000-0xfed17fff]
caller dnv_rd_reg+0xc8/0x240 [pnd2_edac] mapping multiple BARs

Not all of the mmio regions used in dnv_rd_reg() are the same size.  The
MCHBAR window is 32KB and the sideband ports are 64KB.  Pass the correct
size to ioremap() depending on which resource we're reading from.

Signed-off-by: Stephen Douthit <stephend@xxxxxxxxxxxxxxx>
---
 drivers/edac/pnd2_edac.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/pnd2_edac.c b/drivers/edac/pnd2_edac.c
index 903a4f1fadcc..0153c730750e 100644
--- a/drivers/edac/pnd2_edac.c
+++ b/drivers/edac/pnd2_edac.c
@@ -268,11 +268,14 @@ static u64 get_sideband_reg_base_addr(void)
 	}
 }
 
+#define DNV_MCHBAR_SIZE  0x8000
+#define DNV_SB_PORT_SIZE 0x10000
 static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *name)
 {
 	struct pci_dev *pdev;
 	char *base;
 	u64 addr;
+	unsigned long size;
 
 	if (op == 4) {
 		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x1980, NULL);
@@ -287,15 +290,17 @@ static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *na
 			addr = get_mem_ctrl_hub_base_addr();
 			if (!addr)
 				return -ENODEV;
+			size = DNV_MCHBAR_SIZE;
 		} else {
 			/* MMIO via sideband register base address */
 			addr = get_sideband_reg_base_addr();
 			if (!addr)
 				return -ENODEV;
 			addr += (port << 16);
+			size = DNV_SB_PORT_SIZE;
 		}
 
-		base = ioremap((resource_size_t)addr, 0x10000);
+		base = ioremap((resource_size_t)addr, size);
 		if (!base)
 			return -ENODEV;
 
-- 
2.21.0