Re: [PATCH v3 21/21] ARM: dts: imx7-colibri: Add UHS support to eval board

[Marcel Ziswiler]

Hi Philippe

On Wed, 2019-08-07 at 08:26 +0000, Philippe Schenker wrote:
> This commit adds UHS capability to Toradex Eval Boards

How about any other carrier board?

> Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
> 
> ---
> 
> Changes in v3:
> - New patch to make use of ARM: dts: imx7-colibri: fix 1.8V/UHS
> support
> 
> Changes in v2: None
> 
>  arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> index 576dec9ff81c..90121fbe561f 100644
> --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
> @@ -210,9 +210,16 @@
>  };
>  
>  &usdhc1 {
> -	keep-power-in-suspend;
> -	wakeup-source;
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
> +	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>;
> +	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>;
>  	vmmc-supply = <&reg_3v3>;
> +	vqmmc-supply = <&reg_LDO2>;
> +	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
> +	disable-wp;
> +	enable-sdio-wakeup;
> +	keep-power-in-suspend;
>  	status = "okay";
>  };
>  
> -- 
> 2.22.0

Cheers

Marcel