Re: [PATCH] mxsfb: allow attachment of display bridges

[Guido Günther]

Hi,
On Thu, Aug 01, 2019 at 11:18:53AM +0000, Ville Baillie wrote:
> ---
>  drivers/gpu/drm/mxsfb/mxsfb_drv.c | 20 ++++++++++++++++----
>  drivers/gpu/drm/mxsfb/mxsfb_drv.h |  1 +
>  drivers/gpu/drm/mxsfb/mxsfb_out.c | 14 +++++++++++---
>  3 files changed, 28 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> index 6fafc90da4ec..c19a7b7aa3a6 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> @@ -229,10 +229,22 @@ static int mxsfb_load(struct drm_device *drm, unsigned long flags)
>  		goto err_vblank;
>  	}
>  
> -	ret = drm_panel_attach(mxsfb->panel, &mxsfb->connector);
> -	if (ret) {
> -		dev_err(drm->dev, "Cannot connect panel\n");
> -		goto err_vblank;
> +	if (mxsfb->panel) {
> +		ret = drm_panel_attach(mxsfb->panel, &mxsfb->connector);
> +		if (ret) {
> +			dev_err(drm->dev, "Cannot connect panel\n");
> +			goto err_vblank;
> +		}
> +	} else if (mxsfb->bridge) {
> +		ret = drm_bridge_attach(&mxsfb->pipe.encoder, mxsfb->bridge,
> +				NULL);
> +		if (ret) {
> +			dev_err(drm->dev, "Cannot connect bridge\n");
> +			goto err_vblank;
> +		}
> +	} else {
> +		dev_err(drm->dev, "No panel or bridge\n");
> +		return -EINVAL;
>  	}
>  
>  	drm->mode_config.min_width	= MXSFB_MIN_XRES;
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> index d975300dca05..436fe4bbb47a 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> @@ -29,6 +29,7 @@ struct mxsfb_drm_private {
>  	struct drm_simple_display_pipe	pipe;
>  	struct drm_connector		connector;
>  	struct drm_panel		*panel;
> +	struct drm_bridge		*bridge;
>  };
>  
>  int mxsfb_setup_crtc(struct drm_device *dev);
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_out.c b/drivers/gpu/drm/mxsfb/mxsfb_out.c
> index 91e76f9cead6..77e03eb0fca6 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_out.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_out.c
> @@ -78,9 +78,11 @@ int mxsfb_create_output(struct drm_device *drm)
>  {
>  	struct mxsfb_drm_private *mxsfb = drm->dev_private;
>  	struct drm_panel *panel;
> +	struct drm_bridge *bridge;
>  	int ret;
>  
> -	ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0, &panel, NULL);
> +	ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0, &panel,
> +			&bridge);
>  	if (ret)
>  		return ret;
>  
> @@ -91,8 +93,14 @@ int mxsfb_create_output(struct drm_device *drm)
>  	ret = drm_connector_init(drm, &mxsfb->connector,
>  				 &mxsfb_panel_connector_funcs,
>  				 DRM_MODE_CONNECTOR_Unknown);
> -	if (!ret)
> -		mxsfb->panel = panel;
> +	if (!ret) {
> +		if (panel)
> +			mxsfb->panel = panel;
> +		else if (bridge)
> +			mxsfb->bridge = bridge;
> +		else
> +			return -EINVAL;
> +	}
>  
>  	return ret;
>  }
> -- 
> 2.17.1

Robert Chiras posted bridge support for mxsfb back in June:

    https://patchwork.freedesktop.org/patch/314430/?series=62822&rev=1

Cheers,
 -- Guido

> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel