Re: [PATCH 04/16] watchdog: remove ks8695 driver
From: Guenter Roeck
Date: Fri Aug 09 2019 - 16:42:33 EST
On Fri, Aug 09, 2019 at 10:27:32PM +0200, Arnd Bergmann wrote:
> The platform is getting removed, so there are no remaining
> users of this driver.
>
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Please let me know if this should be applied through the watchdog tree.
For now I'll assume it will be applied together with the rest of the
series.
> ---
> .../watchdog/watchdog-parameters.rst | 9 -
> drivers/watchdog/Kconfig | 7 -
> drivers/watchdog/Makefile | 1 -
> drivers/watchdog/ks8695_wdt.c | 319 ------------------
> 4 files changed, 336 deletions(-)
> delete mode 100644 drivers/watchdog/ks8695_wdt.c
>
> diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
> index a3985cc5aeda..226aba56f704 100644
> --- a/Documentation/watchdog/watchdog-parameters.rst
> +++ b/Documentation/watchdog/watchdog-parameters.rst
> @@ -301,15 +301,6 @@ ixp4xx_wdt:
>
> -------------------------------------------------
>
> -ks8695_wdt:
> - wdt_time:
> - Watchdog time in seconds. (default=5)
> - nowayout:
> - Watchdog cannot be stopped once started
> - (default=kernel config parameter)
> -
> --------------------------------------------------
> -
> machzwd:
> nowayout:
> Watchdog cannot be stopped once started
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 8188963a405b..e631f1ae303a 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -477,13 +477,6 @@ config IXP4XX_WATCHDOG
>
> Say N if you are unsure.
>
> -config KS8695_WATCHDOG
> - tristate "KS8695 watchdog"
> - depends on ARCH_KS8695
> - help
> - Watchdog timer embedded into KS8695 processor. This will reboot your
> - system when the timeout is reached.
> -
> config HAVE_S3C2410_WATCHDOG
> bool
> help
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 7caa920e7e60..85f55ec76f8d 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -49,7 +49,6 @@ obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
> obj-$(CONFIG_977_WATCHDOG) += wdt977.o
> obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
> obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
> -obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o
> obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
> obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
> obj-$(CONFIG_SAMA5D4_WATCHDOG) += sama5d4_wdt.o
> diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
> deleted file mode 100644
> index 1550ce3c5702..000000000000
> --- a/drivers/watchdog/ks8695_wdt.c
> +++ /dev/null
> @@ -1,319 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Watchdog driver for Kendin/Micrel KS8695.
> - *
> - * (C) 2007 Andrew Victor
> - */
> -
> -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> -
> -#include <linux/bitops.h>
> -#include <linux/errno.h>
> -#include <linux/fs.h>
> -#include <linux/init.h>
> -#include <linux/kernel.h>
> -#include <linux/miscdevice.h>
> -#include <linux/module.h>
> -#include <linux/moduleparam.h>
> -#include <linux/platform_device.h>
> -#include <linux/types.h>
> -#include <linux/watchdog.h>
> -#include <linux/io.h>
> -#include <linux/uaccess.h>
> -#include <mach/hardware.h>
> -
> -#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
> -#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
> -
> -/*
> - * Timer registers
> - */
> -#define KS8695_TMCON (0x00) /* Timer Control Register */
> -#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
> -#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
> -
> -/* Timer0 Timeout Counter Register */
> -#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
> -
> -#define WDT_DEFAULT_TIME 5 /* seconds */
> -#define WDT_MAX_TIME 171 /* seconds */
> -
> -static int wdt_time = WDT_DEFAULT_TIME;
> -static bool nowayout = WATCHDOG_NOWAYOUT;
> -
> -module_param(wdt_time, int, 0);
> -MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
> - __MODULE_STRING(WDT_DEFAULT_TIME) ")");
> -
> -#ifdef CONFIG_WATCHDOG_NOWAYOUT
> -module_param(nowayout, bool, 0);
> -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> -#endif
> -
> -
> -static unsigned long ks8695wdt_busy;
> -static DEFINE_SPINLOCK(ks8695_lock);
> -
> -/* ......................................................................... */
> -
> -/*
> - * Disable the watchdog.
> - */
> -static inline void ks8695_wdt_stop(void)
> -{
> - unsigned long tmcon;
> -
> - spin_lock(&ks8695_lock);
> - /* disable timer0 */
> - tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
> - __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
> - spin_unlock(&ks8695_lock);
> -}
> -
> -/*
> - * Enable and reset the watchdog.
> - */
> -static inline void ks8695_wdt_start(void)
> -{
> - unsigned long tmcon;
> - unsigned long tval = wdt_time * KS8695_CLOCK_RATE;
> -
> - spin_lock(&ks8695_lock);
> - /* disable timer0 */
> - tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
> - __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
> -
> - /* program timer0 */
> - __raw_writel(tval | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
> -
> - /* re-enable timer0 */
> - tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
> - __raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
> - spin_unlock(&ks8695_lock);
> -}
> -
> -/*
> - * Reload the watchdog timer. (ie, pat the watchdog)
> - */
> -static inline void ks8695_wdt_reload(void)
> -{
> - unsigned long tmcon;
> -
> - spin_lock(&ks8695_lock);
> - /* disable, then re-enable timer0 */
> - tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
> - __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
> - __raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
> - spin_unlock(&ks8695_lock);
> -}
> -
> -/*
> - * Change the watchdog time interval.
> - */
> -static int ks8695_wdt_settimeout(int new_time)
> -{
> - /*
> - * All counting occurs at KS8695_CLOCK_RATE / 128 = 0.256 Hz
> - *
> - * Since WDV is a 16-bit counter, the maximum period is
> - * 65536 / 0.256 = 256 seconds.
> - */
> - if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
> - return -EINVAL;
> -
> - /* Set new watchdog time. It will be used when
> - ks8695_wdt_start() is called. */
> - wdt_time = new_time;
> - return 0;
> -}
> -
> -/* ......................................................................... */
> -
> -/*
> - * Watchdog device is opened, and watchdog starts running.
> - */
> -static int ks8695_wdt_open(struct inode *inode, struct file *file)
> -{
> - if (test_and_set_bit(0, &ks8695wdt_busy))
> - return -EBUSY;
> -
> - ks8695_wdt_start();
> - return stream_open(inode, file);
> -}
> -
> -/*
> - * Close the watchdog device.
> - * If CONFIG_WATCHDOG_NOWAYOUT is NOT defined then the watchdog is also
> - * disabled.
> - */
> -static int ks8695_wdt_close(struct inode *inode, struct file *file)
> -{
> - /* Disable the watchdog when file is closed */
> - if (!nowayout)
> - ks8695_wdt_stop();
> - clear_bit(0, &ks8695wdt_busy);
> - return 0;
> -}
> -
> -static const struct watchdog_info ks8695_wdt_info = {
> - .identity = "ks8695 watchdog",
> - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
> -};
> -
> -/*
> - * Handle commands from user-space.
> - */
> -static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd,
> - unsigned long arg)
> -{
> - void __user *argp = (void __user *)arg;
> - int __user *p = argp;
> - int new_value;
> -
> - switch (cmd) {
> - case WDIOC_GETSUPPORT:
> - return copy_to_user(argp, &ks8695_wdt_info,
> - sizeof(ks8695_wdt_info)) ? -EFAULT : 0;
> - case WDIOC_GETSTATUS:
> - case WDIOC_GETBOOTSTATUS:
> - return put_user(0, p);
> - case WDIOC_SETOPTIONS:
> - if (get_user(new_value, p))
> - return -EFAULT;
> - if (new_value & WDIOS_DISABLECARD)
> - ks8695_wdt_stop();
> - if (new_value & WDIOS_ENABLECARD)
> - ks8695_wdt_start();
> - return 0;
> - case WDIOC_KEEPALIVE:
> - ks8695_wdt_reload(); /* pat the watchdog */
> - return 0;
> - case WDIOC_SETTIMEOUT:
> - if (get_user(new_value, p))
> - return -EFAULT;
> - if (ks8695_wdt_settimeout(new_value))
> - return -EINVAL;
> - /* Enable new time value */
> - ks8695_wdt_start();
> - /* Return current value */
> - return put_user(wdt_time, p);
> - case WDIOC_GETTIMEOUT:
> - return put_user(wdt_time, p);
> - default:
> - return -ENOTTY;
> - }
> -}
> -
> -/*
> - * Pat the watchdog whenever device is written to.
> - */
> -static ssize_t ks8695_wdt_write(struct file *file, const char *data,
> - size_t len, loff_t *ppos)
> -{
> - ks8695_wdt_reload(); /* pat the watchdog */
> - return len;
> -}
> -
> -/* ......................................................................... */
> -
> -static const struct file_operations ks8695wdt_fops = {
> - .owner = THIS_MODULE,
> - .llseek = no_llseek,
> - .unlocked_ioctl = ks8695_wdt_ioctl,
> - .open = ks8695_wdt_open,
> - .release = ks8695_wdt_close,
> - .write = ks8695_wdt_write,
> -};
> -
> -static struct miscdevice ks8695wdt_miscdev = {
> - .minor = WATCHDOG_MINOR,
> - .name = "watchdog",
> - .fops = &ks8695wdt_fops,
> -};
> -
> -static int ks8695wdt_probe(struct platform_device *pdev)
> -{
> - int res;
> -
> - if (ks8695wdt_miscdev.parent)
> - return -EBUSY;
> - ks8695wdt_miscdev.parent = &pdev->dev;
> -
> - res = misc_register(&ks8695wdt_miscdev);
> - if (res)
> - return res;
> -
> - pr_info("KS8695 Watchdog Timer enabled (%d seconds%s)\n",
> - wdt_time, nowayout ? ", nowayout" : "");
> - return 0;
> -}
> -
> -static int ks8695wdt_remove(struct platform_device *pdev)
> -{
> - misc_deregister(&ks8695wdt_miscdev);
> - ks8695wdt_miscdev.parent = NULL;
> -
> - return 0;
> -}
> -
> -static void ks8695wdt_shutdown(struct platform_device *pdev)
> -{
> - ks8695_wdt_stop();
> -}
> -
> -#ifdef CONFIG_PM
> -
> -static int ks8695wdt_suspend(struct platform_device *pdev, pm_message_t message)
> -{
> - ks8695_wdt_stop();
> - return 0;
> -}
> -
> -static int ks8695wdt_resume(struct platform_device *pdev)
> -{
> - if (ks8695wdt_busy)
> - ks8695_wdt_start();
> - return 0;
> -}
> -
> -#else
> -#define ks8695wdt_suspend NULL
> -#define ks8695wdt_resume NULL
> -#endif
> -
> -static struct platform_driver ks8695wdt_driver = {
> - .probe = ks8695wdt_probe,
> - .remove = ks8695wdt_remove,
> - .shutdown = ks8695wdt_shutdown,
> - .suspend = ks8695wdt_suspend,
> - .resume = ks8695wdt_resume,
> - .driver = {
> - .name = "ks8695_wdt",
> - },
> -};
> -
> -static int __init ks8695_wdt_init(void)
> -{
> - /* Check that the heartbeat value is within range;
> - if not reset to the default */
> - if (ks8695_wdt_settimeout(wdt_time)) {
> - ks8695_wdt_settimeout(WDT_DEFAULT_TIME);
> - pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i"
> - ", using %d\n", wdt_time, WDT_MAX_TIME);
> - }
> - return platform_driver_register(&ks8695wdt_driver);
> -}
> -
> -static void __exit ks8695_wdt_exit(void)
> -{
> - platform_driver_unregister(&ks8695wdt_driver);
> -}
> -
> -module_init(ks8695_wdt_init);
> -module_exit(ks8695_wdt_exit);
> -
> -MODULE_AUTHOR("Andrew Victor");
> -MODULE_DESCRIPTION("Watchdog driver for KS8695");
> -MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:ks8695_wdt");
> --
> 2.20.0
>