[PATCH v9 13/21] iommu/mediatek: Move vld_pa_rng into plat_data

[Yong Wu]

Both mt8173 and mt8183 don't have this vld_pa_rng(valid physical address
range) register while mt2712 have. Move it into the plat_data.

Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
Reviewed-by: Evan Green <evgreen@xxxxxxxxxxxx>
Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
---
 drivers/iommu/mtk_iommu.c | 3 ++-
 drivers/iommu/mtk_iommu.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index fce7b6d..790bad8 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -540,7 +540,7 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 			 upper_32_bits(data->protect_base);
 	writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);
 
-	if (data->enable_4GB && data->plat_data->m4u_plat != M4U_MT8173) {
+	if (data->enable_4GB && data->plat_data->has_vld_pa_rng) {
 		/*
 		 * If 4GB mode is enabled, the validate PA range is from
 		 * 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30].
@@ -739,6 +739,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 	.m4u_plat     = M4U_MT2712,
 	.has_4gb_mode = true,
 	.has_bclk     = true,
+	.has_vld_pa_rng   = true,
 	.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
 };
 
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 8d3b525..973d6e0 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -38,6 +38,7 @@ struct mtk_iommu_plat_data {
 
 	/* HW will use the EMI clock if there isn't the "bclk". */
 	bool                has_bclk;
+	bool                has_vld_pa_rng;
 	bool                reset_axi;
 	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
 };
-- 
1.9.1