Re: [PATCH RFC v1 2/2] rcuperf: Add kfree_rcu performance Tests

[Joel Fernandes]

On Tue, Aug 06, 2019 at 05:29:15PM -0700, Paul E. McKenney wrote:
> On Tue, Aug 06, 2019 at 05:20:41PM -0400, Joel Fernandes (Google) wrote:
> > This test runs kfree_rcu in a loop to measure performance of the new
> > kfree_rcu, with and without patch.
> > 
> > To see improvement, run with boot parameters:
> > rcuperf.kfree_loops=2000 rcuperf.kfree_alloc_num=100 rcuperf.perf_type=kfree
> > 
> > Without patch, test runs in 6.9 seconds.
> > With patch, test runs in 6.1 seconds (+13% improvement)
> > 
> > If it is desired to run the test but with the traditional (non-batched)
> > kfree_rcu, for example to compare results, then you could pass along the
> > rcuperf.kfree_no_batch=1 boot parameter.
> 
> You lost me on this one.  You ran two runs, with rcuperf.kfree_no_batch=1
> and without?  Or you ran this patch both with and without the earlier
> patch, and could have run with the patch and rcuperf.kfree_no_batch=1?
> 
> If the latter, it would be good to try all three.

Did this in new patch, will post shortly.

[snip]
> > +torture_param(int, kfree_nthreads, -1, "Number of RCU reader threads");
> > +torture_param(int, kfree_alloc_num, 8000, "Number of allocations and frees done by a thread");
> > +torture_param(int, kfree_alloc_size, 16,  "Size of each allocation");
> 
> Is this used?  How does it relate to KFREE_OBJ_BYTES?

It is not used, I removed it.

> > +torture_param(int, kfree_loops, 10, "Size of each allocation");
> 
> I suspect that this kfree_loops string is out of date.

Updated, thanks.

> > +torture_param(int, kfree_no_batch, 0, "Use the non-batching (slower) version of kfree_rcu");
> 
> All of these need to be added to kernel-parameters.txt.  Along with
> any added by the earlier patch, for that matter.

Will do.

> > +static struct task_struct **kfree_reader_tasks;
> > +static int kfree_nrealthreads;
> > +static atomic_t n_kfree_perf_thread_started;
> > +static atomic_t n_kfree_perf_thread_ended;
> > +
> > +#define KFREE_OBJ_BYTES 8
> > +
> > +struct kfree_obj {
> > +	char kfree_obj[KFREE_OBJ_BYTES];
> > +	struct rcu_head rh;
> > +};
> > +
> > +void kfree_call_rcu_nobatch(struct rcu_head *head, rcu_callback_t func);
> > +
> > +static int
> > +kfree_perf_thread(void *arg)
> > +{
> > +	int i, l = 0;
> 
> It is really easy to confuse "l" and "1" in some fonts, so please use
> a different name.  (From the "showing my age" department:  On typical
> 1970s typewriters, there was no numeral "1" -- you typed the letter
> "l" instead, thus anticipating at least the first digit of "1337".)

Change l to loops ;). I did see typewriters around in my childhood, I thought
they were pretty odd machines :-D. I am sure my daughter will think the same
about land-line phones :-D

> > +	long me = (long)arg;
> > +	struct kfree_obj **alloc_ptrs;
> > +	u64 start_time, end_time;
> > +
> > +	VERBOSE_PERFOUT_STRING("kfree_perf_thread task started");
> > +	set_cpus_allowed_ptr(current, cpumask_of(me % nr_cpu_ids));
> > +	set_user_nice(current, MAX_NICE);
> > +	atomic_inc(&n_kfree_perf_thread_started);
> > +
> > +	alloc_ptrs = (struct kfree_obj **)kmalloc(sizeof(struct kfree_obj *) * kfree_alloc_num,
> > +						  GFP_KERNEL);
> > +	if (!alloc_ptrs)
> > +		return -ENOMEM;
> > +
> > +	start_time = ktime_get_mono_fast_ns();
> 
> Don't you want to announce that you started here rather than above in
> order to avoid (admittedly slight) measurement inaccuracies?

Yes, in revised patch I am announcing here.

> > +	do {
> > +		for (i = 0; i < kfree_alloc_num; i++) {
> > +			alloc_ptrs[i] = kmalloc(sizeof(struct kfree_obj), GFP_KERNEL);
> > +			if (!alloc_ptrs[i])
> > +				return -ENOMEM;
> > +		}
> > +
> > +		for (i = 0; i < kfree_alloc_num; i++) {
> > +			if (!kfree_no_batch) {
> > +				kfree_rcu(alloc_ptrs[i], rh);
> > +			} else {
> > +				rcu_callback_t cb;
> > +
> > +				cb = (rcu_callback_t)(unsigned long)offsetof(struct kfree_obj, rh);
> > +				kfree_call_rcu_nobatch(&(alloc_ptrs[i]->rh), cb);
> > +			}
> > +		}
> > +
> > +		schedule_timeout_uninterruptible(2);
> 
> Why the two-jiffy wait in the middle of a timed test?  Yes, you need
> a cond_resched() and maybe more here, but a two-jiffy wait?  I don't
> see how this has any chance of getting valid measurements.
> 
> What am I missing here?

Replace it with cond_resched() as we discussed.

> > +	} while (!torture_must_stop() && ++l < kfree_loops);
> > +
> > +	kfree(alloc_ptrs);
> > +
> > +	if (atomic_inc_return(&n_kfree_perf_thread_ended) >= kfree_nrealthreads) {
> > +		end_time = ktime_get_mono_fast_ns();
> 
> Don't we want to capture the end time before the kfree()?

Fixed.

> > +		pr_alert("Total time taken by all kfree'ers: %llu ns, loops: %d\n",
> > +		       (unsigned long long)(end_time - start_time), kfree_loops);
> > +		if (shutdown) {
> > +			smp_mb(); /* Assign before wake. */
> > +			wake_up(&shutdown_wq);
> > +		}
> > +	}
> > +
> > +	torture_kthread_stopping("kfree_perf_thread");
> > +	return 0;
> > +}
> > +
> > +static void
> > +kfree_perf_cleanup(void)
> > +{
> > +	int i;
> > +
> > +	if (torture_cleanup_begin())
> > +		return;
> > +
> > +	if (kfree_reader_tasks) {
> > +		for (i = 0; i < kfree_nrealthreads; i++)
> > +			torture_stop_kthread(kfree_perf_thread,
> > +					     kfree_reader_tasks[i]);
> > +		kfree(kfree_reader_tasks);
> > +	}
> > +
> > +	torture_cleanup_end();
> > +}
> > +
> > +/*
> > + * shutdown kthread.  Just waits to be awakened, then shuts down system.
> > + */
> > +static int
> > +kfree_perf_shutdown(void *arg)
> > +{
> > +	do {
> > +		wait_event(shutdown_wq,
> > +			   atomic_read(&n_kfree_perf_thread_ended) >=
> > +			   kfree_nrealthreads);
> > +	} while (atomic_read(&n_kfree_perf_thread_ended) < kfree_nrealthreads);
> > +
> > +	smp_mb(); /* Wake before output. */
> > +
> > +	kfree_perf_cleanup();
> > +	kernel_power_off();
> > +	return -EINVAL;
> > +}
> 
> Is there some way to avoid (almost) duplicating rcu_perf_shutdown()?

At the moment, I don't see a good way to do this without passing in function
pointers or using macros which I think would look uglier than the above
addition. Sorry.

thanks,

 - Joel