Re: [PATCH v8 05/21] clk: tegra: pll: Save and restore pll context

[Dmitry Osipenko]

09.08.2019 21:50, Sowjanya Komatineni ÐÐÑÐÑ:
> 
> On 8/9/19 10:50 AM, Dmitry Osipenko wrote:
>> 09.08.2019 20:39, Sowjanya Komatineni ÐÐÑÐÑ:
>>> On 8/9/19 4:33 AM, Dmitry Osipenko wrote:
>>>> 09.08.2019 2:46, Sowjanya Komatineni ÐÐÑÐÑ:
>>>>> This patch implements save and restore of PLL context.
>>>>>
>>>>> During system suspend, core power goes off and looses the settings
>>>>> of the Tegra CAR controller registers.
>>>>>
>>>>> So during suspend entry pll context is stored and on resume it is
>>>>> restored back along with its state.
>>>>>
>>>>> Acked-by: Thierry Reding <treding@xxxxxxxxxx>
>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
>>>>> ---
>>>>> ÂÂ drivers/clk/tegra/clk-pll.c | 88 ++++++++++++++++++++++++++++-----------------
>>>>> ÂÂ drivers/clk/tegra/clk.hÂÂÂÂ |Â 2 ++
>>>>> ÂÂ 2 files changed, 58 insertions(+), 32 deletions(-)
>>>>>
>>>>> diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
>>>>> index 1583f5fc992f..e52add2bbdbb 100644
>>>>> --- a/drivers/clk/tegra/clk-pll.c
>>>>> +++ b/drivers/clk/tegra/clk-pll.c
>>>>> @@ -1008,6 +1008,28 @@ static unsigned long clk_plle_recalc_rate(struct clk_hw *hw,
>>>>> ÂÂÂÂÂÂ return rate;
>>>>> ÂÂ }
>>>>> ÂÂ +static void tegra_clk_pll_restore_context(struct clk_hw *hw)
>>>>> +{
>>>>> +ÂÂÂ struct tegra_clk_pll *pll = to_clk_pll(hw);
>>>>> +ÂÂÂ struct clk_hw *parent = clk_hw_get_parent(hw);
>>>>> +ÂÂÂ unsigned long parent_rate = clk_hw_get_rate(parent);
>>>>> +ÂÂÂ unsigned long rate = clk_hw_get_rate(hw);
>>>>> +ÂÂÂ u32 val;
>>>>> +
>>>>> +ÂÂÂ if (clk_pll_is_enabled(hw))
>>>>> +ÂÂÂÂÂÂÂ return;
>>>>> +
>>>>> +ÂÂÂ if (pll->params->set_defaults)
>>>>> +ÂÂÂÂÂÂÂ pll->params->set_defaults(pll);
>>>>> +
>>>>> +ÂÂÂ clk_pll_set_rate(hw, rate, parent_rate);
>>>>> +
>>>>> +ÂÂÂ if (!__clk_get_enable_count(hw->clk))
>>>> What about orphaned clocks? Is enable_count > 0 for them?
>>> There are no orphaned pll clocks.
>> Sorry, I meant the "clk_ignore_unused".
> 
> clocks with CLK_IGNORE_UNUSED are taken care by clk driver.
> 
> clk_disable_unused checks for clocks with this flag and if they are not enabled it will
> enable them.
> 
> So by the time suspend happens enable_count is > 0

Okay.