Re: [PATCH 2/2] arm64: allwinner: h6: enable i2c0 in PineH64

[Chen-Yu Tsai]

On Sun, Aug 11, 2019 at 5:05 PM Bhushan Shah <bshah@xxxxxxx> wrote:
>
> i2c0 bus is exposed by PI-2 BUS in the PineH64, model B.
>
> Signed-off-by: Bhushan Shah <bshah@xxxxxxx>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> index 684d1daa3081..a184361bc10d 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> @@ -160,6 +160,14 @@
>         vcc-pg-supply = <&reg_aldo1>;
>  };
>
> +&i2c0 {
> +       status = "okay";

We don't enable interfaces that are exposed on the extension headers
by default. Instead we let the users enable it themselves, by modifying
the device tree either with overlays or through U-boot commands.

Please set this to "disabled", and add a comment mentioning that it is
on the PI-2 BUS. Having it explicitly listed in the source serves as a
pointer to people looking at how to enable stuff.

ChenYu

> +};
> +
> +&i2c0_pins {
> +       bias-pull-up;
> +};
> +
>  &r_i2c {
>         status = "okay";
>
> --
> 2.17.1
>