Re: [linux-sunxi] [PATCH v5 1/3] arm64: dts: allwinner: Add SPDIF node for Allwinner H6

[Chen-Yu Tsai]

On Mon, Aug 12, 2019 at 12:52 PM Chen-Yu Tsai <wens@xxxxxxxxxx> wrote:
>
> Hi,
>
> On Mon, Aug 12, 2019 at 4:31 AM ClÃment PÃron <peron.clem@xxxxxxxxx> wrote:
> >
> > The Allwinner H6 has a SPDIF controller called OWA (One Wire Audio).
> >
> > Only one pinmuxing is available so set it as default.
> >
> > Signed-off-by: ClÃment PÃron <peron.clem@xxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 38 ++++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > index 7628a7c83096..677eb374678d 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > @@ -83,6 +83,24 @@
> >                 method = "smc";
> >         };
> >
> > +       sound-spdif {
> > +               compatible = "simple-audio-card";
> > +               simple-audio-card,name = "sun50i-h6-spdif";
> > +
> > +               simple-audio-card,cpu {
> > +                       sound-dai = <&spdif>;
> > +               };
> > +
> > +               simple-audio-card,codec {
> > +                       sound-dai = <&spdif_out>;
> > +               };
> > +       };
> > +
> > +       spdif_out: spdif-out {
> > +               #sound-dai-cells = <0>;
> > +               compatible = "linux,spdif-dit";
> > +       };
> > +
>
> We've always had this part in the board dts. It isn't relevant to boards
> that don't have SPDIF output.
>
> Also, not so relevant here, but there are different simple sound card
> constructs. Some support multiple audio streams with dynamic PCM routing.
> How these are configured really depends on what interfaces are usable.
>
> So keeping this at the board level is IMO a better choice.

Forgot to mention. Both patches and all parts in this patch are OK. It's
just the parts the need to be moved.


> ChenYu
>
>
> >         timer {
> >                 compatible = "arm,armv8-timer";
> >                 interrupts = <GIC_PPI 13
> > @@ -282,6 +300,11 @@
> >                                 bias-pull-up;
> >                         };
> >
> > +                       spdif_tx_pin: spdif-tx-pin {
> > +                               pins = "PH7";
> > +                               function = "spdif";
> > +                       };
> > +
> >                         uart0_ph_pins: uart0-ph-pins {
> >                                 pins = "PH0", "PH1";
> >                                 function = "uart0";
> > @@ -411,6 +434,21 @@
> >                         };
> >                 };
> >
> > +               spdif: spdif@5093000 {
> > +                       #sound-dai-cells = <0>;
> > +                       compatible = "allwinner,sun50i-h6-spdif";
> > +                       reg = <0x05093000 0x400>;
> > +                       interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> > +                       clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
> > +                       clock-names = "apb", "spdif";
> > +                       resets = <&ccu RST_BUS_SPDIF>;
> > +                       dmas = <&dma 2>;
> > +                       dma-names = "tx";
> > +                       pinctrl-names = "default";
> > +                       pinctrl-0 = <&spdif_tx_pin>;
> > +                       status = "disabled";
> > +               };
> > +
> >                 usb2otg: usb@5100000 {
> >                         compatible = "allwinner,sun50i-h6-musb",
> >                                      "allwinner,sun8i-a33-musb";
> > --
> > 2.20.1
> >
> > --
> > You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxxx
> > To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20190811203144.5999-2-peron.clem%40gmail.com.