[PATCH v2 5/5] can: xilinx_can: Fix the data phase btr1 calculation

[Appana Durga Kedareswara rao]

From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>

While calculating bitrate for the data phase, the driver is using phase
segment 1 of the arbitration phase instead of the data phase.

Fixes: c223da6 ("can: xilinx_can: Add support for CANFD FD frames")
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xxxxxxxxxx>
Signed-off-by: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
Acked-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
---
 drivers/net/can/xilinx_can.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 4cb8c1c9..ab26691 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -425,7 +425,7 @@ static int xcan_set_bittiming(struct net_device *ndev)
 		btr0 = dbt->brp - 1;
 
 		/* Setting Time Segment 1 in BTR Register */
-		btr1 = dbt->prop_seg + bt->phase_seg1 - 1;
+		btr1 = dbt->prop_seg + dbt->phase_seg1 - 1;
 
 		/* Setting Time Segment 2 in BTR Register */
 		btr1 |= (dbt->phase_seg2 - 1) << priv->devtype.btr_ts2_shift;
-- 
2.7.4