[PATCH v4 20/21] ARM: dts: imx7-colibri: Add UHS support to eval board

[Philippe Schenker]

This commit adds UHS capability to Toradex Eval Boards

Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>

---

Changes in v4: None
Changes in v3:
- New patch to make use of ARM: dts: imx7-colibri: fix 1.8V/UHS support

Changes in v2: None

 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 576dec9ff81c..90121fbe561f 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -210,9 +210,16 @@
 };
 
 &usdhc1 {
-	keep-power-in-suspend;
-	wakeup-source;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>;
 	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_LDO2>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	enable-sdio-wakeup;
+	keep-power-in-suspend;
 	status = "okay";
 };
 
-- 
2.22.0