[PATCH v4 17/21] ARM: dts: imx6ull: improve can templates

[Philippe Schenker]

From: Max Krummenacher <max.krummenacher@xxxxxxxxxxx>

Add the pinmuxing and a inactive node for flexcan1 on SODIMM 55/63
and move the inactive flexcan nodes to imx6ull-colibri-eval-v3.dtsi
where they belong.

Note that this commit does not enable flexcan functionality, but rather
eases the effort needed to do so.

Signed-off-by: Max Krummenacher <max.krummenacher@xxxxxxxxxxx>
Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>

---

Changes in v4:
- Move can nodes to module deviceteree include imx6ull-colibri.dtsi

Changes in v3: None
Changes in v2: None

 .../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi |  2 +-
 arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi   |  2 +-
 arch/arm/boot/dts/imx6ull-colibri.dtsi        | 28 +++++++++++++++++--
 3 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
index fb213bec4654..95a11b8bcbdb 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
@@ -15,7 +15,7 @@
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
-		&pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6>;
+		&pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>;
 };
 
 &iomuxc_snvs {
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index 038d8c90f6df..a0545431b3dc 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -26,7 +26,7 @@
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
-		&pinctrl_gpio4 &pinctrl_gpio5>;
+		&pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>;
 
 };
 
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index e3220298dd6f..6d850d997e1e 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -54,6 +54,18 @@
 	vref-supply = <&reg_module_3v3_avdd>;
 };
 
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
 /* Colibri SPI */
 &ecspi1 {
 	cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
@@ -256,6 +268,13 @@
 		>;
 	};
 
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
 	pinctrl_flexcan2: flexcan2-grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
@@ -271,8 +290,6 @@
 
 	pinctrl_gpio1: gpio1-grp {
 		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0x74 /* SODIMM 55 */
-			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0x74 /* SODIMM 63 */
 			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0X14 /* SODIMM 77 */
 			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x14 /* SODIMM 99 */
 			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x14 /* SODIMM 133 */
@@ -325,6 +342,13 @@
 		>;
 	};
 
+	pinctrl_gpio7: gpio7-grp { /* CAN1 */
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0x74 /* SODIMM 55 */
+			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0x74 /* SODIMM 63 */
+		>;
+	};
+
 	pinctrl_gpmi_nand: gpmi-nand-grp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
-- 
2.22.0