Re: [PATCH v5 01/10] dt-bindings: add powercontroller

[Lee Jones]

On Mon, 12 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@xxxxxxxx>
> 
> add mt6323-rtc and mt6323-pwrc to mt6397 mfd DT bindings
> an example is shown in mt6323-poweroff.txt
> 
> Suggested-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
> Signed-off-by: Josef Friedl <josef.friedl@xxxxxxxx>
> Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
> Acked-for-MFD-by: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
> changes since v4: use relative path
> changes since v3: none
> changes since v2: separated rtc-mt6397.txt to part 2
> ---
>  .../devicetree/bindings/mfd/mt6397.txt        | 20 +++++++++++++------
>  .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++++++++
>  2 files changed, 34 insertions(+), 6 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
> index 0ebd08af777d..063f5fe1cace 100644
> --- a/Documentation/devicetree/bindings/mfd/mt6397.txt
> +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
> @@ -8,11 +8,12 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
>  - Clock
>  - LED
>  - Keys
> +- Power controller
>  
>  It is interfaced to host controller using SPI interface by a proprietary hardware
>  called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
>  See the following for pwarp node definitions:
> -Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
> +../../bindings/soc/mediatek/pwrap.txt
>  
>  This document describes the binding for MFD device and its sub module.
>  
> @@ -22,14 +23,16 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323"
>  Optional subnodes:
>  
>  - rtc
> -	Required properties:
> +	Required properties: Should be one of follows
> +		- compatible: "mediatek,mt6323-rtc"
>  		- compatible: "mediatek,mt6397-rtc"
> +	For details, see ../../bindings/rtc/rtc-mt6397.txt

Apologies for the ambiguity.  I don't think you need to go all the way
back to 'bindings'.  Just one step back will do fine.  ../rtc/* will be
fine here.

-- 
Lee Jones [æçæ]
Linaro Services Technical Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog