Re: [PATCH] Add optional chip erase functionality to AT25 EEPROM driver.

[Joe Burmeister]

On 12/08/2019 16:51, David Laight wrote:
> From: Joe Burmeister
> > Sent: 09 August 2019 13:54
> >
> > Many, though not all, AT25s have an instruction for chip erase.
> > If there is one in the datasheet, it can be added to device tree.
> > Erase can then be done in userspace via the sysfs API with a new
> > "erase" device attribute. This matches the eeprom_93xx46 driver's
> > "erase".
> Is it actually worth doing though?
>
> I'm guessing that device erase can easily take over a minute.


That must depend on the AT25. The one we're using (AT25F512A), as it's 
setup, it's fast enough. The datasheet states "The CHIP ERASE cycle time 
typically is 2 seconds.". I've not timed it's because as I said, seamed 
fast enough.


If you can't erase it, then it's basically write once, or you expose it 
with spi_dev to Flashrom to erase it.


> When I looked at 'device erase' on an EEPROM it took just as long
> as erasing the sectors one at a time - but without the warm cosy
> feeling that progress was being made.


I didn't look at sector erase as I'm only interested in erasing it all 
and there was a command for it. I figured if someone wanted sector by 
sector they would implement it.



> Not only that you can't really interrupt the erase, so either
> the application has to sleep uninterruptibly for the duration
> or you have to have some kind of 'device busy' response while
> it is done asynchronously.


That's true, but as I said, it's fast enough it's not an issue for us.

> 	David
>
> -
> Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK
> Registration No: 1397386 (Wales)

Regards,

Joe