RE: [EXT] Re: [v6,2/2] dt-bindings: rtc: add bindings for FlexTimer Module

[Biwen Li]

> 
> On Fri, Jul 19, 2019 at 11:54:00AM +0800, Biwen Li wrote:
> > The patch adds bindings for FlexTimer Module
> >
> > Signed-off-by: Biwen Li <biwen.li@xxxxxxx>
> > ---
> > Change in v6:
> >     - correct subject
> >     - delete note
> >     - remove reg property about IP Powerdown exception register
> >
> > Change in v5:
> >     - None
> >
> > Change in v4:
> >     - add note about dts and kernel options
> >     - add aliases in example
> >
> > Change in v3:
> >       - remove reg-names property
> >       - correct cells number
> >
> > Change in v2:
> >       - replace ls1043a with ls1088a as example
> >       - add rcpm node and fsl,rcpm-wakeup property
> >
> >  .../bindings/rtc/rtc-fsl-ftm-alarm.txt        | 41 +++++++++++++++++++
> >  1 file changed, 41 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> >
> > diff --git
> > a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> > b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> > new file mode 100644
> > index 000000000000..9291b022ffc7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> > @@ -0,0 +1,41 @@
> > +Freescale FlexTimer Module (FTM) Alarm
> > +
> > +Required properties:
> > +- compatible : Should be "fsl,<chip>-ftm-alarm", the
> > +            supported chips include
> > +            "fsl,ls1012a-ftm-alarm"
> > +            "fsl,ls1021a-ftm-alarm"
> > +            "fsl,ls1028a-ftm-alarm"
> > +            "fsl,ls1043a-ftm-alarm"
> > +            "fsl,ls1046a-ftm-alarm"
> > +            "fsl,ls1088a-ftm-alarm"
> > +            "fsl,ls208xa-ftm-alarm"
> > +- reg : Specifies base physical address and size of the register sets
> > +for the
> > +  FlexTimer Module.
> > +- interrupts : Should be the FlexTimer Module interrupt.
> > +- fsl,rcpm-wakeup property and rcpm node : Please refer
> > +     Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > +
> > +Optional properties:
> > +- big-endian: If the host controller is big-endian mode, specify this property.
> > +  The default endian mode is little-endian.
> > +
> > +Example:
> > +aliases {
> > +     ...
> > +     rtc1 = ftm_alarm0; // Use FlexTimer Module as /dev/rtc1
> > +     ...
> > +};
> 
> As I said before, drop this. It's not going to work when this is converted to
> schema and the example is compiled. Feel free to convert this to schema and
> see...
Ok, got it. I will drop this in v7.
> 
> > +
> > +rcpm: rcpm@1e34040 {
> > +     compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
> > +     reg = <0x0 0x1e34040 0x0 0x18>;
> > +     #fsl,rcpm-wakeup-cells = <6>;
> > +};
> > +
> > +ftm_alarm0: timer@2800000 {
> 
> If this is an RTC, then rtc@...
This is not an RTC.
> 
> > +     compatible = "fsl,ls1088a-ftm-alarm";
> > +     reg = <0x0 0x2800000 0x0 0x10000>;
> > +     fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
> > +     interrupts = <0 44 4>;
> > +};
> > --
> > 2.17.1
> >