[Patch v3] drivers: mtd: spi-nor: Add flash property for mt25qu512a and mt35xu02g

[Ashish Kumar]

mt25qu512a is rebranded after its spinoff from STM, so it is
different only in term of operating frequency, initial JEDEC id
is same as that of n25q512a. In order to avoid any confussion
with respect to name new entry is added.
This flash is tested for Single I/O and QUAD I/O mode on LS1046FRWY.

mt35xu02g is Octal flash supporting Single I/O and QCTAL I/O
and it has been tested on LS1028ARDB

Signed-off-by: Kuldeep Singh <kuldeep.singh@xxxxxxx>
Signed-off-by: Ashish Kumar <ashish.kumar@xxxxxxx>
---
v3:
-Reword commits msg
-rebase to top of mtd-linux spi-nor/next
v2:
Incorporate review comments from Vignesh

 drivers/mtd/spi-nor/spi-nor.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 03cc788..97d3de8 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1988,6 +1988,12 @@ static const struct flash_info spi_nor_ids[] = {
 	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
+
+	/* Micron */
+	{ "mt25qu512a", INFO6(0x20bb20, 0x104400, 64 * 1024, 1024, SECT_4K |
+				USE_FSR | SPI_NOR_DUAL_READ |
+				SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+
 	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
 	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
 	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
@@ -2003,6 +2009,9 @@ static const struct flash_info spi_nor_ids[] = {
 			SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
 			SPI_NOR_4B_OPCODES)
 	},
+	{ "mt35xu02g",  INFO(0x2c5b1c, 0, 128 * 1024, 2048,
+			SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
+			SPI_NOR_4B_OPCODES) },
 
 	/* PMC */
 	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
-- 
2.7.4