Re: [PATCH 2/2] net: gmii2rgmii: Switch priv field in mdio device structure

[Andrew Lunn]

On Tue, Aug 13, 2019 at 04:46:40PM +0530, Harini Katakam wrote:
> Hi Andrew,
> 
> On Thu, Aug 1, 2019 at 9:36 AM Andrew Lunn <andrew@xxxxxxx> wrote:
> >
> > On Wed, Jul 31, 2019 at 03:06:19PM +0530, Harini Katakam wrote:
> > > Use the priv field in mdio device structure instead of the one in
> > > phy device structure. The phy device priv field may be used by the
> > > external phy driver and should not be overwritten.
> >
> > Hi Harini
> >
> > I _think_ you could use dev_set_drvdata(&mdiodev->dev) in xgmiitorgmii_probe() and
> > dev_get_drvdata(&phydev->mdiomdio.dev) in _read_status()
> 
> Thanks for the review. This works if I do:
> dev_set_drvdata(&priv->phy_dev->mdio.dev->dev) in probe
> and then
> dev_get_drvdata(&phydev->mdio.dev) in _read_status()
> 
> i.e mdiodev in gmii2rgmii probe and priv->phy_dev->mdio are not the same.
> 
> If this is acceptable, I can send a v2.

Hi Harini

I think this is better, making use of the central driver
infrastructure, rather than inventing something new.

The kernel does have a few helper, spi_get_drvdata, pci_get_drvdata,
hci_get_drvdata. So maybe had add phydev_get_drvdata(struct phy_device
*phydev)?

	Thanks
		Andrew