Re: [PATCH v6 1/4] dt-bindings: net: phy: Add subnode for LED configuration

[Andrew Lunn]

On Tue, Aug 13, 2019 at 12:11:44PM -0700, Matthias Kaehlcke wrote:
> The LED behavior of some Ethernet PHYs is configurable. Add an
> optional 'leds' subnode with a child node for each LED to be
> configured. The binding aims to be compatible with the common
> LED binding (see devicetree/bindings/leds/common.txt).
> 
> A LED can be configured to be:
> 
> - 'on' when a link is active, some PHYs allow configuration for
>   certain link speeds
>   speeds
> - 'off'
> - blink on RX/TX activity, some PHYs allow configuration for
>   certain link speeds
> 
> For the configuration to be effective it needs to be supported by
> the hardware and the corresponding PHY driver.
> 
> Suggested-by: Andrew Lunn <andrew@xxxxxxx>
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew