Re: [PATCH v4 01/14] net: phy: adin: add support for Analog Devices PHYs

[Florian Fainelli]

On 8/12/2019 4:23 AM, Alexandru Ardelean wrote:
> This change adds support for Analog Devices Industrial Ethernet PHYs.
> Particularly the PHYs this driver adds support for:
>  * ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY
>  * ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit
>    Ethernet PHY
> 
> The 2 chips are register compatible with one another. The main difference
> being that ADIN1200 doesn't operate in gigabit mode.
> 
> The chips can be operated by the Generic PHY driver as well via the
> standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the
> kernel as well. This assumes that configuration of the PHY has been done
> completely in HW, according to spec.
> 
> Configuration can also be done via registers, which will be supported by
> this driver.
> 
> Datasheets:
>   https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdf
>   https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdf
> 
> Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>

Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
-- 
Florian