Re: [PATCH RFC tip/core/rcu 14/14] rcu/nohz: Make multi_cpu_stop() enable tick on all online CPUs

[Joel Fernandes]

On Tue, Aug 13, 2019 at 07:48:09AM -0700, Paul E. McKenney wrote:
> On Tue, Aug 13, 2019 at 02:30:19PM +0200, Frederic Weisbecker wrote:
> > On Mon, Aug 12, 2019 at 04:23:16PM -0700, Paul E. McKenney wrote:
> > > On Mon, Aug 12, 2019 at 11:02:33PM +0200, Frederic Weisbecker wrote:
> > > > On Fri, Aug 02, 2019 at 08:15:01AM -0700, Paul E. McKenney wrote:
> > > > Looks like it's not the right fix but, should you ever need to set an
> > > > all-CPUs (system wide) tick dependency in the future, you can use tick_set_dep().
> > > 
> > > Indeed, I have dropped this patch, but I now do something similar in
> > > RCU's CPU-hotplug notifiers.  Which does have an effect, especially on
> > > the system that isn't subject to the insane-latency cpu_relax().
> > > 
> > > Plus I am having to put a similar workaround into RCU's quiescent-state
> > > forcing logic.
> > > 
> > > But how should this really be done?
> > > 
> > > Isn't there some sort of monitoring of nohz_full CPUs for accounting
> > > purposes?  If so, would it make sense for this monitoring to check for
> > > long-duration kernel execution and enable the tick in this case?  The
> > > RCU dyntick machinery can be used to remotely detect the long-duration
> > > kernel execution using something like the following:
> > > 
> > > 	int nohz_in_kernel_snap = rcu_dynticks_snap_cpu(cpu);
> > > 
> > > 	...
> > > 
> > > 	if (rcu_dynticks_in_eqs_cpu(cpu, nohz_in_kernel_snap)
> > > 		nohz_in_kernel_snap = rcu_dynticks_snap_cpu(cpu);
> > > 	else
> > > 		/* Turn on the tick! */
> > > 
> > > I would supply rcu_dynticks_snap_cpu() and rcu_dynticks_in_eqs_cpu(),
> > > which would be simple wrappers around RCU's private rcu_dynticks_snap()
> > > and rcu_dynticks_in_eqs() functions.
> > > 
> > > Would this make sense as a general solution, or am I missing a corner
> > > case or three?
> > 
> > Oh I see. Until now we considered than running into the kernel (between user/guest/idle)
> > is supposed to be short but there can be specific places where it doesn't apply.
> > 
> > I'm wondering if, more than just providing wrappers, this shouldn't be entirely
> > driven by RCU using the tick_set_dep_cpu()/tick_clear_dep_cpu() at appropriate timings.
> > 
> > I don't want to sound like I'm trying to put all the work on you :p  It's just that
> > the tick shouldn't know much about RCU, it's rather RCU that is a client for the tick and
> > is probably better suited to determine when a CPU becomes annoying with its extended grace
> > period.
> > 
> > Arming a CPU timer could also be an alternative to tick_set_dep_cpu() for that.
> > 
> > What do you think?
> 
> Left to itself, RCU would take action only when a given nohz_full
> in-kernel CPU was delaying a grace period, which is what the (lightly
> tested) patch below is supposed to help with.  If that is all that is
> needed, well and good!
> 
> But should we need long-running in-kernel nohz_full CPUs to turn on
> their ticks when they are not blocking an RCU grace period, for example,
> when RCU is idle, more will be needed.  To that point, isn't there some
> sort of monitoring that checks up on nohz_full CPUs ever second or so?

Wouldn't such monitoring need to be more often than a second, given that
rcu_urgent_qs and rcu_need_heavy_qs are configured typically to be sooner
(200-300 jiffies on my system).

> If so, perhaps that monitoring could periodically invoke an RCU function
> that I provide for deciding when to turn the tick on.  We would also need
> to work out how to turn the tick off in a timely fashion once the CPU got
> out of kernel mode, perhaps in rcu_user_enter() or rcu_nmi_exit_common().
> 
> If this would be called only every second or so, the separate grace-period
> checking is still needed for its shorter timespan, though.
> 
> Thoughts?

Do you want me to test the below patch to see if it fixes the issue with my
other test case (where I had a nohz full CPU holding up a grace period).

2 comments below:

> ------------------------------------------------------------------------
> 
> commit 1cb89508804f6f2fdb79a1be032b1932d52318c4
> Author: Paul E. McKenney <paulmck@xxxxxxxxxxxxx>
> Date:   Mon Aug 12 16:14:00 2019 -0700
> 
>     rcu: Force tick on for nohz_full CPUs not reaching quiescent states
>     
>     CPUs running for long time periods in the kernel in nohz_full mode
>     might leave the scheduling-clock interrupt disabled for then full
>     duration of their in-kernel execution.  This can (among other things)
>     delay grace periods.  This commit therefore forces the tick back on
>     for any nohz_full CPU that is failing to pass through a quiescent state
>     upon return from interrupt, which the resched_cpu() will induce.
>     
>     Reported-by: Joel Fernandes <joel@xxxxxxxxxxxxxxxxx>
>     Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxx>
> 
> diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
> index 8c494a692728..8b8f5bffdc5a 100644
> --- a/kernel/rcu/tree.c
> +++ b/kernel/rcu/tree.c
> @@ -651,6 +651,12 @@ static __always_inline void rcu_nmi_exit_common(bool irq)
>  	 */
>  	if (rdp->dynticks_nmi_nesting != 1) {
>  		trace_rcu_dyntick(TPS("--="), rdp->dynticks_nmi_nesting, rdp->dynticks_nmi_nesting - 2, rdp->dynticks);
> +		if (tick_nohz_full_cpu(rdp->cpu) &&
> +		    rdp->dynticks_nmi_nesting == 2 &&
> +		    rdp->rcu_urgent_qs && !rdp->rcu_forced_tick) {
> +			rdp->rcu_forced_tick = true;
> +			tick_dep_set_cpu(rdp->cpu, TICK_DEP_MASK_RCU);
> +		}
>  		WRITE_ONCE(rdp->dynticks_nmi_nesting, /* No store tearing. */
>  			   rdp->dynticks_nmi_nesting - 2);
>  		return;
> @@ -886,6 +892,16 @@ void rcu_irq_enter_irqson(void)
>  	local_irq_restore(flags);
>  }
>  
> +/*
> + * If the scheduler-clock interrupt was enabled on a nohz_full CPU
> + * in order to get to a quiescent state, disable it.
> + */
> +void rcu_disable_tick_upon_qs(struct rcu_data *rdp)
> +{
> +	if (tick_nohz_full_cpu(rdp->cpu) && rdp->rcu_forced_tick)
> +		tick_dep_clear_cpu(rdp->cpu, TICK_DEP_MASK_RCU);
> +}
> +
>  /**
>   * rcu_is_watching - see if RCU thinks that the current CPU is not idle
>   *
> @@ -1980,6 +1996,7 @@ rcu_report_qs_rdp(int cpu, struct rcu_data *rdp)
>  		if (!offloaded)
>  			needwake = rcu_accelerate_cbs(rnp, rdp);
>  
> +		rcu_disable_tick_upon_qs(rdp);
>  		rcu_report_qs_rnp(mask, rnp, rnp->gp_seq, flags);
>  		/* ^^^ Released rnp->lock */
>  		if (needwake)
> @@ -2269,6 +2286,7 @@ static void force_qs_rnp(int (*f)(struct rcu_data *rdp))
>  	int cpu;
>  	unsigned long flags;
>  	unsigned long mask;
> +	struct rcu_data *rdp;
>  	struct rcu_node *rnp;
>  
>  	rcu_for_each_leaf_node(rnp) {
> @@ -2293,8 +2311,11 @@ static void force_qs_rnp(int (*f)(struct rcu_data *rdp))
>  		for_each_leaf_node_possible_cpu(rnp, cpu) {
>  			unsigned long bit = leaf_node_cpu_bit(rnp, cpu);
>  			if ((rnp->qsmask & bit) != 0) {
> -				if (f(per_cpu_ptr(&rcu_data, cpu)))
> +				rdp = per_cpu_ptr(&rcu_data, cpu);
> +				if (f(rdp)) {
>  					mask |= bit;
> +					rcu_disable_tick_upon_qs(rdp);
> +				}

I am guessing this was the earlier thing you corrected, cool!!

>  			}
>  		}
>  		if (mask != 0) {
> @@ -2322,7 +2343,7 @@ void rcu_force_quiescent_state(void)
>  	rnp = __this_cpu_read(rcu_data.mynode);
>  	for (; rnp != NULL; rnp = rnp->parent) {
>  		ret = (READ_ONCE(rcu_state.gp_flags) & RCU_GP_FLAG_FQS) ||
> -		      !raw_spin_trylock(&rnp->fqslock);
> +		       !raw_spin_trylock(&rnp->fqslock);
>  		if (rnp_old != NULL)
>  			raw_spin_unlock(&rnp_old->fqslock);
>  		if (ret)
> @@ -2855,7 +2876,7 @@ static void rcu_barrier_callback(struct rcu_head *rhp)
>  {
>  	if (atomic_dec_and_test(&rcu_state.barrier_cpu_count)) {
>  		rcu_barrier_trace(TPS("LastCB"), -1,
> -				   rcu_state.barrier_sequence);
> +				  rcu_state.barrier_sequence);
>  		complete(&rcu_state.barrier_completion);
>  	} else {
>  		rcu_barrier_trace(TPS("CB"), -1, rcu_state.barrier_sequence);
> @@ -2879,7 +2900,7 @@ static void rcu_barrier_func(void *unused)
>  	} else {
>  		debug_rcu_head_unqueue(&rdp->barrier_head);
>  		rcu_barrier_trace(TPS("IRQNQ"), -1,
> -				   rcu_state.barrier_sequence);
> +				  rcu_state.barrier_sequence);
>  	}
>  	rcu_nocb_unlock(rdp);
>  }
> @@ -2906,7 +2927,7 @@ void rcu_barrier(void)
>  	/* Did someone else do our work for us? */
>  	if (rcu_seq_done(&rcu_state.barrier_sequence, s)) {
>  		rcu_barrier_trace(TPS("EarlyExit"), -1,
> -				   rcu_state.barrier_sequence);
> +				  rcu_state.barrier_sequence);
>  		smp_mb(); /* caller's subsequent code after above check. */
>  		mutex_unlock(&rcu_state.barrier_mutex);
>  		return;
> @@ -2938,11 +2959,11 @@ void rcu_barrier(void)
>  			continue;
>  		if (rcu_segcblist_n_cbs(&rdp->cblist)) {
>  			rcu_barrier_trace(TPS("OnlineQ"), cpu,
> -					   rcu_state.barrier_sequence);
> +					  rcu_state.barrier_sequence);
>  			smp_call_function_single(cpu, rcu_barrier_func, NULL, 1);
>  		} else {
>  			rcu_barrier_trace(TPS("OnlineNQ"), cpu,
> -					   rcu_state.barrier_sequence);
> +					  rcu_state.barrier_sequence);
>  		}
>  	}
>  	put_online_cpus();
> @@ -3168,6 +3189,7 @@ void rcu_cpu_starting(unsigned int cpu)
>  	rdp->rcu_onl_gp_seq = READ_ONCE(rcu_state.gp_seq);
>  	rdp->rcu_onl_gp_flags = READ_ONCE(rcu_state.gp_flags);
>  	if (rnp->qsmask & mask) { /* RCU waiting on incoming CPU? */
> +		rcu_disable_tick_upon_qs(rdp);
>  		/* Report QS -after- changing ->qsmaskinitnext! */
>  		rcu_report_qs_rnp(mask, rnp, rnp->gp_seq, flags);

Just curious about the existing code. If a CPU is just starting up (after
bringing it online), how can RCU be waiting on it? I thought RCU would not be
watching offline CPUs.

thanks,

 - Joel
[snip]