[PATCH] regulator: twl: voltage lists for vdd1/2 on twl4030

[Andreas Kemnade]

_opp_supported_by_regulators() wrongly ignored errors from
regulator_is_supported_voltage(), so it considered errors as
success. Since
commit 498209445124 ("regulator: core: simplify return value on suported_voltage")
regulator_is_supported_voltage() returns a real boolean, so
errors make _opp_supported_by_regulators() return false.

That reveals a problem with the declaration of the VDD1/2
regulators on twl4030.
The VDD1/VDD2 regulators on twl4030 are neither defined with
voltage lists nor with the continuous flag set, so
regulator_is_supported_voltage() returns false and an error
before above mentioned commit (which was considered success)
The result is that after the above mentioned commit cpufreq
does not work properly e.g. dm3730.

[    2.490997] core: _opp_supported_by_regulators: OPP minuV: 1012500 maxuV: 1012500, not supported by regulator
[    2.501617] cpu cpu0: _opp_add: OPP not supported by regulators (300000000)
[    2.509246] core: _opp_supported_by_regulators: OPP minuV: 1200000 maxuV: 1200000, not supported by regulator
[    2.519775] cpu cpu0: _opp_add: OPP not supported by regulators (600000000)
[    2.527313] core: _opp_supported_by_regulators: OPP minuV: 1325000 maxuV: 1325000, not supported by regulator
[    2.537750] cpu cpu0: _opp_add: OPP not supported by regulators (800000000)

The patch fixes declaration of VDD1/2 regulators by
adding proper voltage lists.

Fixes: 498209445124 ("regulator: core: simplify return value on suported_voltage")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
Tested-by: Adam Ford <aford173@xxxxxxxxx> #logicpd-torpedo-37xx-devkit
Link: https://lore.kernel.org/r/20190814214319.24087-1-andreas@xxxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 drivers/regulator/twl-regulator.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 6fa15b2d6fb3..866b4dd01da9 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -359,6 +359,17 @@ static const u16 VINTANA2_VSEL_table[] = {
 	2500, 2750,
 };
 
+/* 600mV to 1450mV in 12.5 mV steps */
+static const struct regulator_linear_range VDD1_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
+};
+
+/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
+static const struct regulator_linear_range VDD2_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
+	REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
+};
+
 static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
@@ -427,6 +438,8 @@ static int twl4030smps_get_voltage(struct regulator_dev *rdev)
 }
 
 static const struct regulator_ops twl4030smps_ops = {
+	.list_voltage   = regulator_list_voltage_linear_range,
+
 	.set_voltage	= twl4030smps_set_voltage,
 	.get_voltage	= twl4030smps_get_voltage,
 };
@@ -466,7 +479,8 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
 		}, \
 	}
 
-#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
+#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \
+		n_volt) \
 static const struct twlreg_info TWL4030_INFO_##label = { \
 	.base = offset, \
 	.id = num, \
@@ -479,6 +493,9 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
 		.owner = THIS_MODULE, \
 		.enable_time = turnon_delay, \
 		.of_map_mode = twl4030reg_map_mode, \
+		.n_voltages = n_volt, \
+		.n_linear_ranges = ARRAY_SIZE(label ## _ranges), \
+		.linear_ranges = label ## _ranges, \
 		}, \
 	}
 
@@ -518,8 +535,8 @@ TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00);
 TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08);
 TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08);
 TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08);
-TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08);
-TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08);
+TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68);
+TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69);
 /* VUSBCP is managed *only* by the USB subchip */
 TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08);
 TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);
-- 
2.20.1