[PATCH v2] vfio_pci: Replace pci_try_reset_function() with __pci_reset_function_locked() to ensure that the pci device configuration space is restored to its original state

[hexin]

In vfio_pci_enable(), save the device's initial configuration information
and then restore the configuration in vfio_pci_disable(). However, the
execution result is not the same. Since the pci_try_reset_function()
function saves the current state before resetting, the configuration
information restored by pci_load_and_free_saved_state() will be
overwritten. The __pci_reset_function_locked() function can be used
to prevent the configuration space from being overwritten.

Fixes: 890ed578df82 ("vfio-pci: Use pci "try" reset interface")
Signed-off-by: hexin <hexin15@xxxxxxxxx>
Signed-off-by: Liu Qi <liuqi16@xxxxxxxxx>
Signed-off-by: Zhang Yu <zhangyu31@xxxxxxxxx>
---
 drivers/vfio/pci/vfio_pci.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 703948c..0220616 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -438,11 +438,20 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
 	pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
 
 	/*
-	 * Try to reset the device.  The success of this is dependent on
-	 * being able to lock the device, which is not always possible.
+	 * Try to get the locks ourselves to prevent a deadlock. The
+	 * success of this is dependent on being able to lock the device,
+	 * which is not always possible.
+	 * We can not use the "try" reset interface here, which will
+	 * overwrite the previously restored configuration information.
 	 */
-	if (vdev->reset_works && !pci_try_reset_function(pdev))
-		vdev->needs_reset = false;
+	if (vdev->reset_works && pci_cfg_access_trylock(pdev)) {
+		if (device_trylock(&pdev->dev)) {
+			if (!__pci_reset_function_locked(pdev))
+				vdev->needs_reset = false;
+			device_unlock(&pdev->dev);
+		}
+		pci_cfg_access_unlock(pdev);
+	}
 
 	pci_restore_state(pdev);
 out:
-- 
1.8.3.1